http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최남호,구경완 永同大學校 2001 硏究論叢 Vol.7 No.1
옥외 가공선로의 설계에 있어 오손도는 가장 중요한 요소 중 하나이며, 이와 같은 특성을 감안하여 국내외의 전력회사는 각종 옥외 전력설비의 설계를 위하여 3년여에 이르는 장기간에 걸쳐 오손도를 측정하고, 측정 데이터에 대한 통계분석을 통하여 대표 오손도를 선정하고 있으나 경제적 측면 및 시간적 측면에 있어 막대한 투자를 요구하는 단점을 지니고 있다. 한편, 확률적 측면에 있어 오손 섬락사고는 뇌 및 풍우에 비해 그 발생확률이 매우 낮은 특성을 지니지만, 발생시 영향을 미치는 영역 및 복구에 소요되는 비용 및 시간이 막대하다는 특성을 지니고 있어 이에 대한 철저한 대비가 요구되고 있다. 각종의 오손요인 중 전력설비의 전기적 특성에 가장 큰 영향을 미치는 것으로는 염해 오손을 들 수 있다. 이에 본 연구에서는 3년여의 측정데이터에 대한 통계분석 및 대수정규분포법을 활용한 통계처리를 바탕으로 제주도를 포함한 각각 해안지역에 대하여 적용가능한 염해 오손물의 해안도달거리 별 분포특성을 도출하고, 기존 한국전력 공사의 규정과의 비교 ·검토를 수행하였다. The degree of contamination is one of the most important factors to design the overhead lines. So, in general, long period measurement (over 3 year) and statistical analysis should be carried before the design. But, it is not easy to carry the job that needs a great amount of efforts. The cause of natural accident could be classified as, lightning, rainstorm, and contamination. However, the accident by contamination influences on the larger area than that by lightning, and, in the case of rapid contamination, it takes a shorter time than rainstorm. The salt contaminant is one of the most representative pollutants, and known as the main source of the accident by contamination. So, in this investigation, we make a research on the distribution characteristics of salt contaminants in South Korea to evaluate the old standard. And, it could be a good groundwork to revise the old standard.
최남호,한상옥 한국조명전기설비학회 2001 조명·전기설비학회논문지 Vol.15 No.3
유지·보수를 위한 비용과 선로의 안정성과 신뢰성을 저해하는 정전 등의 사고를 감소시키기 위해서는 오손정도에 대한 정확한 측정이 선행되어야만 한다. 그러나, IEC 60815 등을 통해 추천되어 많은 연구에 있어 사용되어 온 수동 필세법은 인력, 비용, 측정오차 등의 측면에 있어 많은 문제점을 지니고 있다. 이에 본 연구에서는 옥외 환경에서 사용되는 애자표면의 오손정도를 측정할 수 있는 새로운 형태의 자동측정장치의 개발을 목적으로 한 일련의 연구를 수행하고자 한다. 장비의 설계 및 평가를 위해 FLUX 2D를 이용한 시뮬레이션과 인공오손과 관련한 다양한 실험을 수행하였다. 이와 같은 노력의 결과, 새로운 형태의 오손도 자동측정장치의 개발에 있어 중요한 것으로 사려되는 몇몇 결론을 얻을 수 있었다. To reduce the maintenance expense and the possibility of electric outage and/or accident, which causes the decrease in stability and reliability of transmission/distribution line, most of all, accurate measurement for the degree of contamination should be preceded. But the conventional method (brush wiping method), which is recommended in IEC 60815, has sow significant problem in the aspect of man power, expense, error, and so forth. In this investigation, we purpose the development of a new type automatic measuring apparatus, which could measure the degree of contamination on the surface of insulator in outdoor condition. To design and evaluate the apparatus, a FLUX 2D is used, and various laboratory tests, artificial contamination tests, were carried to proof the actual performance. With the result of these effort, we can get the meaningful conclusion to develope a new type automatic apparatus for contamination measurement.