대학 SW 교육의 현장 적합도 분석에 기반한 현장 맞춤형 SW 교육 과정 설계에 대한 연구

차준섭,Cha, Joon Seub 한국스마트미디어학회 2015 스마트미디어저널 Vol.4 No.4

최근 통신 및 센서 기술의 발달로 인해 초연결 시대로 접어들고 있다. 특히, 정보통신기술이 다른 분야의 산업과 융합하면서 사물인터넷, 빅데이터, 클라우드와 같은 새로운 산업분야들이 등장하고 있다. 이러한 산업들은 소프트웨어에 대한 비중이 높은 산업으로 이에 따라 소프트웨어 인력에 대한 수요가 급증하고 있다. 하지만 대학 교육 과정은 이러한 변화에 적극적인 대응이 부족하고 전통적인 교육과정에서 벗어나지 못해 산업 수요와의 미스매치가 발생하고 있다. 따라서, 본 논문에서는 4년제 대학의 소프트웨어 교과목을 조사하고 기업 관점에서의 대학의 소프트웨어 과정에 대한 인식을 조사하고자 한다. 또한, 대학과 기업 간의 소프트웨어 교육 과정에 대한 중요도 분석으로 대학의 교과 과정 현장 적합도를 도출하고자 한다. 최종적으로 현장에 적합한 소프트웨어 교육 과정 모델 설계 전략을 제시하고자 한다. Recently, it is entering the hyper connectivity age due to the development of sensor and communication technology. In particular, it is emerging new industries such as the IoT, bigdata, cloud by convergence with the ICT and other industries. Because these industries are high the gravity of the software, the demand for software manpower is increasing rapidly. But university curriculum don't deviate from the traditional curriculum, and lack of positive response to these changes is occurring a mismatch with the industry demand. In this paper, investigate a software curriculums of the four-year university, and will attempt to investigate the perception about the university software course of the corporate perspective. Also, we draw a on-site fitness of universities training course by analysis of importance on software training courses between universities and businesses. Finally, we propose a strategy model for software training course design appropriate for the field.

중소기업 컴퓨팅사용자의 성공적 영향요인에 관한 실증연구

차준섭 호남대학교 산업기술연구소 1997 산업기술연구논문집 Vol.5 No.-

紡績 System의 E.D.P 適用에 관한 硏究 : 回歸分析을 中心으로

車俊燮 혜전대학 1983 論文集 Vol.1 No.-

Q.C. is a work of finding out the best condition of Production, analyzing the proper factors which have influences on the qualities of products. Computer system is available to carry out this method of control rationally. The main purpose of this study is to suggest the desirable method of application of E.D.P. in order to produce the yarn of good quality economically in the Q.C. of Spinning process. The writer chose C. Spinning Co. in Korea as the object of this study. And the writer chose the six factors which have influences on the qualities of yarn and standardized them after several measurings. And the writer analyzed the above factors by means of computer, using Regression Program Package. As a result of this study, the writer found out the relations of these factors (variables) and predicted the possible changes of other variables. And the writer also inferred the optimum point of a particular variable from how other variables varies. And so the writer obtained the correct and prompt information to produce the yarn of good quality, using the Computer Package. The writer expects that the program and data of this study can be helpful to the rational Q.C in the Spinning Company.

자동차부품업체 종합경영정보시스템에 관한 연구

차준섭 호남대학교 정보통신연구소 1996 정보통신연구 Vol.5 No.-

기업경쟁력확보의 수단으로 경영정보시스템은 중요한 위치를 차지하고 있다. 그러나 경영정보시스템의 구축은 장기간에 걸쳐 많은 인· 물적 자원을 필요로 하는 거대한 작업이다. 그러므로 개발되는 정보시스템의 규모가 크면 클수록 실패의 가능성이 높아진다. 본 논문은 자동차 소성물을 생산하고 있는 중소제조업체 D사를 비롯한 3개사의 공동정보시스템 구축에 있어서 성공의 가능성을 높이기 위해 단계적인 목표를 두고 수행하였으며 의사결정의 중요한 기본자료가 되는 거래처리를 중심으로 업무재설계기법을 통해 시스템의 효과를 극대화 시킬 수 있도록 하였다. 또한 영업에 따른 생산계획, 자재의구입 및 자재 투입, 생산, 납품, 정산에 이르기까지 전체적인 흐름을 관릿할 수 있는 일관된 중소제조업체형 종합 경영정보시스템의 개발을 위하여 환경분석 및 기본 모형을 제시하고 1단계 모형을 구현하였다. Management information system plays an important part in securing the competitive power of business firms. But the establishment of an effective system is a tough work to require a lot of human and material resources over a long period. The larger the scale of the system is. the more difficult it will be for the firms concerned to form a successful information system for 3 small-and-medium industries to parts. To develop an fittings. centered on a firm to manufature plastic parts. To develop an eficient model. the paper deals with the whole business process; how they pursue the goals step by step, how they use the important data for decision making. and how they adopt the technique of administrative re-planning as a measure for the maximization of effectiveness of imformation system. This paper suggests an initial model for a general information system for small and medium industries by the analysis of their business conditions. With this model. it is expected for the firms to manage consistently and effectively the whole business process. i.e.. the production program. the purchase and commitment of source materials. the manufacturing.the delivery of goods. and the settlement of acconts.

제조업체 ERP 도입에 따른 고찰

차준섭 湖南大學校 情報通信硏究所 1999 정보통신연구 Vol.9 No.-

증권사 홈트레이딩시스템 평가가 주가에 미치는 영향 분석

차준섭,최정일 한국경영과학회 2002 한국경영과학회 학술대회논문집 Vol.2002-A No.-

The online stock trading has begun to spread in 1998 And HTS started to be evaluated by Stockpia. which specializes in evaluation of financial online sites. from the 1st quarter of year 2002 This study is to examine whether the evaluation on HTS has an impact on the stock prices of the security corporations.<br/> For the evaluation of the relation. I classified the security corporations into two groups (2 top and 5 top) and compared the value-fluctuation of the securities industry with theirs at the identical time and thoroughly analyzed the results Accordingly the increase rate of the 5 top ranked corp showed remarkably higher than the securities industry's Moreover. the increase rate of the 2 top ranked corporations surpassed the 5 top ranked corporations'.<br/> As the total volume of online trading has increased in the stock trading market, the number of new customers has also increased for the security corporations. which received high ranks on their HTS based on the evaluation results, and their market shares have risen relatively Therefore, it seems that receiving high ranks on their HTS has a positive impact on their stock prices.

전자상거래에서 고객의 신뢰와 구매력의 관계에 대한 연구

차준섭,장재혁 호남대학교 2002 호남대학교 학술논문집 Vol.23 No.2

B2C(Business to Customer) is one of the electronic commercial transaction. Recently, Internet Shopping mall that is the typical type of it has been on the sharp rise But of all the internet users, those who purchases actually online is few. With typical business, both parties(buyer and seller) came face to face so that they can check the quality of product and pay it to get directly. For e-commerce, however, these things are done in the virtual area of Internet. Therefore it is not possible for customers trust anything about online shopping as others easily, and it causes buying online not to be facilitated inevitably. For example, trying to buy online, customers worry about if the quality of products displayed in the internet mall is acceptable, delivery is to be done correctly and someone can steal our credit card number provided for paying Ironically while buying online increases steadily, reliability for shopping mall is no improved much better. As a result, to facilitate business to customer(B2C), it is required to analyze the factors to make online shopping reliable and the factors that are chief in improving reliability. This document reviews the major factors in trust, and relationship between customers trust and purchasing power, based on the recognition that reliability in business to customer(B2C) is important. With doing research in existing studies and classifying them, theoretic model is provided. For verification and discussion about this model, surveys targets 20∼30 years ole men and women have been made. First, the reputation of Internet Shopping mall do not influence customer trust. Second, two factors of safetyness and trust in e-channel do not influence customer trust, significantly. This point is shown that individual propensity than environmental influence is more important. Third, trust was found o have a strong positive effect on power of purchase. Implications of the findings are discussed for researchers and practitioners.

回歸分析을 利用한 織物의 壓縮彈性에 관한 硏究 : 毛織物을 中心으로

車俊燮 호남대학교 1986 호남대학교 학술논문집 Vol.6 No.2

The Purpose of this study is to find out the compressional resilience of wool fabric by means of computer. Six influential factors on the compressional resilience of fabric are selected and standadized through several times of measurings. the above factors are analyzed by means of computer with regression program package. By selecting six significant regression models, the relations of these vanables have been found out and the possible changes of other variables have been predicted. For example, in proportion to the increase of thickness, the works of compression and recovery increase. And the retio of compression decrease in proportion to the increase of packing factor. The program and data of this study can be helptul to the companies which with to perform Q.C.

非線型回歸分析의 E.D.P.適用에 關한 硏究

車俊燮 湖南大學校 1985 호남대학교 학술논문집 Vol.5 No.-

The main Purpose of this study is suggest a desirable regression equation applicable to E.D.P to produce fabric of better quality. The writer first chose four factors which had influence on the compressional qualities of fabric, then standardized them after several measurings. The above factors were analyzed by using computer and Regression program. As a result, the writer could induce a correct and prompt regression equation through finding out a certain relationship between density and compressional resilience and predicting possible change in other variables. The program and data of this study can be helpful for the companies concerned to perform Q.C.

장식선 제거를 통한 세산화 오류 최소화에 관한 연구

차준섭 호남대학교 1989 호남대학교 학술논문집 Vol.10 No.-

The Characters formed by the mixture of strokes which has a pattern, such as the Korean and English alphabets and the number pattern, can decrease the errors in the pattern recognition by minimizing the errors of the strokes. Especially, there is a serif used to make the characters beautified in the Korean alphabets. By the way this serif exercises a great effect upon the thinning, which is the prephase for the pattern recognition and this does a great effect upon the errors in the pattern recognition in turn. Therefore, this study aims at the suggestion of the system which can analyze and recognize the pattern structure of characteres by deleting the unnecessary groups through the class-ification by groups according to the character shape, using GTD(Group-Traverse and Delete) Parsing.