http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김홍주,주범순,김선미,이종현,Kim, H.J.,Joo, B.S.,Kim, S.M.,Lee, J.H. 한국전자통신연구원 2012 전자통신동향분석 Vol.27 No.2
패킷 전달 계층과 광 전달 계층을 하나로 통합하여 비용 감소, 망 효율 증대, 에너지 절감 등의 효과를 가지고, 액세스망, 메트로망, 코어망 영역에 걸쳐 최적의 단대단 경로를 자동으로 제공하는 패킷-광 전달망에 대한 기술동향 및 시장전망을 기술한 것으로서, 배경 기술인 패킷 전달망 기술, 광 전달망 기술, 제어평면 기술과 전반적인 전달망의 발전동향에 대해서 살펴보고, 패킷-광 전달망의 필요성 및 개념, 특징, 기술개발 및 사업자 동향, 시장전망에 대해서 분석한다.
백정훈,주범순 대한전자공학회 2004 전자공학회지 Vol.31 No.8
이더넷 특유의 범용성과 라인 속도의 포워딩 기능을 제공하는 고성능 네트워크 프로세서의 등장으로 메트로 이더넷의 핵심 장비로 선보인 이더넷 스위치는 메트로 영역에서의 성공 여세를 몰아코어 영역까지 적용범위를 확장하고 있다. 이러한 이더넷 스위치의 시장 변화에 따라 세계 유수의 이더넷 스위치 벤더는 스위칭 용량에 있어서는 수 Tbps ∼ 수 십 Tbps, 라인 인터페이스 및 패킷 처리 능력에 있어서는 10 기가비트 이더넷을 넘어 이것의 후속 버전인 40 기가비트 이더넷 혹은 100 기가비트 이더넷을 수용하면서 캐리어 수준의 신뢰도를 제공하는 차세대 이더넷 스위치 개발을 가속화하고 있는 실정이다.(중략)
Faultless Protection Methods in Self-Healing Ethernet Ring Networks
Kwang-Koog Lee,류정동,주범순 한국전자통신연구원 2012 ETRI Journal Vol.34 No.6
Self-healing Ethernet rings show promise for realizing the SONET/SDH-grade resilience in Carrier Ethernet infrastructures. However, when a ring is faulty, high-priority protection messages are processed in less time than low-priority data frames are processed. In this situation, any delayed data frames either being queued or traveling through long ring spans will cause the ring nodes to generate incorrect forwarding information. As a result, the data frames spread in the wrong direction, causing the ring to become unstable. To solve this problem, we propose four schemes, that is, dual flush, flush delay timer setting, purge triggering, and priority setting, and evaluate their protection performance under various traffic conditions on a ring based on the Ethernet ring protection (ERP) method. In addition, we develop an absorbing Markov chain model of the ERP protocol to observe how traffic congestion can impact the protection performance of the proposed priority setting scheme. Based on our observations, we propose a more reliable priority setting scheme, which guarantees faultless protection, even in a congested ring.
6.25Gbps 고속신호 전송용 FR4 백플레인 설계 및 구현
윤지욱(Jiwook Youn),주범순(Bheomsoon Joo),김광준(Kwangjoon Kim) 대한전자공학회 2011 대한전자공학회 학술대회 Vol.2011 No.12
본 논문에서는 FR4 기반의 백플레인으로 6.25Gbps 고속신호를 전송하기 위한 설계기술에 대해 고찰해 보고 이를 토대로 제작된 백플레인의 성능을 실험적으로 검증하였다. 제작된 백플레인은 적은 PCB 층수로 이중화된 스위치 패브릭을 효과적으로 지원하기 위해서 고속 신호선을 공간적으로 분리하여 배치하였다. 또한 PCB 내층에서의 stub에 의한 반사파 영향을 제거하기 위해서 back-drilling 기법을 사용하였다. 백플레인은 16층 4.2mm 두께로 제작되었으며, 480Gbps 전송용량을 가지는 패킷-광 통합 전달망 시스템에 적용된다. This paper discusses FR4 based backplane design technologies to transmit 6.25Gbps high speed signal using serial line. The need of high speed transmission on the backplane has been gaining greater interest to reduce the development time and system cost. We realize and experimentally demonstrate the backplane with FR4 material. The back-drilling technology allows the realized backplane to be applied to implementations such as packet-optical transport system with 480Gbps transmission capacity.