http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
폐쇄형 데크플레이트를 사용한 합성슬래브의 전단부착 특성에 관한 연구
주기수,박성무,Ju, Gi Su,Park, Sung Moo 한국강구조학회 2001 韓國鋼構造學會 論文集 Vol.13 No.5
데크플레이트를 사용한 합성슬래브가 합성거동을 발휘하기 위해서는 데크플레이트와 콘크리트의 부착강도가 확보되어야한다. 합성슬래브에서 전단부착강도는 콘크리트와 데크플레이트의 화학적 부착력, 마찰저항 기계적 상호작용에 의해 발생한다. 또 기계적 상호작용은 길이 방향 전단력 전달 장치인 엠보싱 및 쉬어코넥터, 데크플레이트 형상 등에 의해서 확보되어 진다. 그리고 기계적 상호작용의 효과는 상호 접착부의 수직박리를 구속할 수 있는 데크의 형상과 쉬어코넥터 설치에 따른 단부정착 여부에 따라 크게 달라진다. 그러므로, 본 연구에서는 폐쇄형 데크플레이트에 대하여 기계적 전달장치인 엠보싱과 쉬어 코넥터로 사용되는 스터드 볼트에 대한 전단 보강장치의 부착효과를 Push-off 실험을 통하여 규명하였으며 이들 인자들에 대하여 제안식을 제시하였다. 이는 합성슬래브 설계방법의 기초자료로 이용될 수 있을 것으로 사료된다. Composite slab with deckplate needs sufficient bond strength between deckplate and concrete to conduct composite behavior Composite slab can transfer the shear by either chemical adhesion interface interlock, or active friction. There are several way of mechanical shear connection in composite slab. that is embossments shear connector shape of deckplate etc. Effect of mechanical interaction is deped on shape of deckplate which is to prevent peeling between deckplate and concrete and an amount of shear connector. The behavior and strength of the connection between the decking and the concrete slab due to embossments and end anchorage may be estimated using the push-off tests described in this paper We proposed the equation of shear bond strength in the composite slab It will be use to design by basic data in composite slab.
데크플레이트 단면형상에 따른 합성슬래브의 합성능력에 관한 연구
주기수,박성무,Ju, Gi-Su,Park, Sung-Moo 한국강구조학회 2000 韓國鋼構造學會 論文集 Vol.12 No.6
이 논문은 합성슬래브의 구조적 거동에 관한 것으로, 개방형 형상인 사다리꼴 데크플레이트와 폐쇄형인 역삼각형 상단플랜지 데크플레이트를 사용한 합성슬래브의 실험에 의한 것이다. 그 결과 합성슬래브의 합성거동을 위해서는 데크플레이트의 형상적인 요소가 매우 중요한 변수로 나타났다. 즉 폐쇄형 형상인 역삼각형 데크플레이트가 사다리꼴 형상보다 전단슬립과 처짐에 더 효과적으로 나타났다. 그러므로 합성데크슬래브 용도로 사용되는 데크플레이트의 개발과 사용에 있어 형상적인 요소가 매우 중요하게 취급되어야 하며, 이에 대한 이론적인 평가도 이루어 졌다. This paper provides the results of the study on the structural behavior of the composite metal deck slab system. The experimental study on composite slabs with trapezoidal and inverse-triangle-top-flange deckplate result, it was found that the geometry of the cross-section was more important than any other factors to ensure the composite action of deck slabs. Hence the inverse-triangle-top-flange of closed box was more effective on the shear slip and deflection than the trapezoidal deck of open shape. These results show that the continuing development of composite deck plate must consider importantly the geometry of the deck. The experimental results were compared with established formulas and were analysed to advance a theory on composite slabs using deckplates.
CFT기둥에서 강관과 콘크리트 부착응럭의 해석기법 개선에 관한 연구
석근영,주기수,최준영,채승훈,강주원,Seok, Keun-Yung,Ju, Gi-Su,Choi, Joon-Young,Chae, Seoung-Hun,Kang, Joo-Won 한국공간구조학회 2007 한국공간구조학회지 Vol.7 No.2
건축물의 고층화, 대형화에 따라 기둥이 부담해야할 하중이 증대되고, 이로 인한 기둥단면적의 증대에 효율적으로 대처하기 위해 CFT(콘크리트 충전강관)기둥의 형식을 개발하게 되었다. CFT기둥은 이질재료로 구성된 복합구조형식으로, 역학적 거동을 규명하기 위해 많은 연구가 이루어지고 있다. 본 연구는 원형과 각형의 CFT기둥에 있어서 콘크리트 코어와 강관, 두 이질재료간의 접촉면 부착응력에 대한 해석적 연구로서 비선형 해석프로그램인 ABAQUS/Standard Version 5.8을 이용하여 shear-connector의 부착형태 및 위치에 따른 부착응력을 비교하고, 접촉면의 역학적 특성에 대한 개선된 해석기법을 제시하고자 한다. Buildings become high and large. CFT(Concrete Filled steel Tube) columns have been developed to manage effectively that loads which columns support and cross sections of columns are increased. Because CFT column is the composite structure made of two different materials, many researches have been performed to look into mechanical behaviors. This study is an analytic study about bond stress on interface between concrete core and steel tube in circular and rectangular CFT columns. ABAQUS/Standard Version 5.8 is used to analyze bond stress by bond form and position of shear-connector, and improved analystic method about mechanical characters on interface is suggested.
이창우,이승재,주기수,Lee, Chang-Woo,Lee, Seung-Jae,Ju, Gi-Su 한국공간구조학회 2007 한국공간구조학회지 Vol.7 No.3
본 논문은 광섬유 브래그 격자 센서를 이용한 대공간 구조물의 실시간 모니터링을 설명하였고, 외부 외력 작용시에 대공간 구조물의 요소인 막이나 케이블의 변형을 계측하는데 광섬유 브래그 격자 센서가 매우 적합하다는 점을 검증하고 있다. 이와 함께 대공간 구조물에 광섬유 브래그 격자 센서를 이용하여 변형을 모니터링하는 실험을 실시하였다. 장스팬의 대공간 구조물을 모니터링하기 위하여 많은 요소를 계측할 수 있는 장비가 필요하다. 실험의 결과로 광섬유 브래그 격자 센서는 외력 작용시에 정확한 계측을 보여주었다. 그러므로 대공간 구조물의 변형율을 계산할 수 있고 실시간 모니터링이 가능하다. In this paper, always monitoring system of fiber Bragg Crating(FBG)Sensor is described and FBGs are well suited for measuring the movement in the part of the spatial structure(for example, cable, membrane and so on)under the pressure conditions. In order to measure the movement of long span structure, we need the measurable equipment that takes in many spots to measure. In the result of experiment, the fiber sensors showed good response to the pressure conditions. Therefore, We could calculate the movement of spatial structure and be possible health monitoring of the spatial structure.
박성무 ( Park Sung-moo ),주기수 ( Ju Gi-su ) 한국구조물진단유지관리공학회 1998 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.2 No.1
At recent, the building become larger and higher according to the social situation. And the long span-large space is necessary in the interior of building. According to these conditions, the mixed system which compose a structural system using more than two kinds of material is used to satisfy these requirements. Reinforced concrete columns and steel beams are used at the subject building of this study. But the slab on the steel beam is constructed being separated with adjacent slab, concrete beam and column. From this cause over lateral load is forced at the column and many problems in use are occured because of water leakage induced by destruction of waterproof layer The purpose of this study is to research the effect of lateral restraint as diaphragm of slab which is joined with core and adjacent concrete slab by the steal braced tie beam.