http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마이크로웨이브 광대역 수신단 구성을 위한 재구성 주파수 혼합기 설계
김재현(Jae-Hyun Kim),조윤현(Yun-Hyun Jo),김상욱(Sang-Wook Kim),고민호(Min-Ho Go),박효달(Hyo-Dal Park) 한국전자파학회 2015 한국전자파학회논문지 Vol.26 No.6
본 논문은 레이더용 마이크로웨이브 광대역 주파수 대역에서 동작하는 수신단 구성을 위한 재구성 주파수 혼합기를 설계 및 제작하였다. 제안한 주파수 혼합기는 역병렬 다이오드(anti-parallel diode)를 사용하였고, 제어 전압 유무에 따라 기본파 혼합기 또는 부고조파 혼합기로 동작한다. 제작한 주파수 혼합기는 제어전압이 인가된 기본파 혼합 모드에서 X-대역/ Ku-대역으로 동작하고,-10 dB 변환손실, 2.0 dBm P1dB 특성을 나타내었다. 부고조파 혼합모드에서는 Ka-대역으로 동작하고, -17 dB 변환손실, 2.0 dBm P1dB 특성을 나타내었다. In this paper, we designed a reconfigurable mixer for microwave broadband receiver. The proposed mixer using a anti-parallel diode is operated as a fundamental mixer or sub-harmonic mixer with respect to a control voltage. A fundamental mixer with a control voltage show a conversion loss of -10 dB, 1 dB compression point of 2.0 dBm at X-band/ Ku-band. On the other hand, it is performed as a sub-harmonic mixer with a conversion loss of -17 dB, 1 dB compression point of 2.0 dBm at Ka-band.
축방향 영구자석형 발전기의 2차원, 3차원 유한요소법을 이용한 해석 비교 검증
조창흠(Chagn-Hum Jo),이건(Jian Li),조윤현(Yun-Hyun Cho) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
In this paper, I consider Axial Flux Permanent Magnet Generator to alter stator tooth of the model following the lamination direction. There is different points for 2 and 3-Dimensional Finite Element Method. Characteristics of 2D FEM are it can state relative analysis in quick time while it has to make the sections of stator tooth following the lamination direction. And characteristics of 3D FEM are it is generally difficult to calculate many elements. but 3D FEM is able to calculate correct analysis. so I compare between 2 and 3-Dimensional Finite Element Method about Characteristic analysis like Back EMF, Cogging Torque, Flux density of Axial Flux Permanent Magnet Generator. Finally I demonstrate how to use the method according to circumstances.
축방향 자속형 영구자석 BLDC 전동기의 코깅 토크 저감에 관한 연구
曺元榮(Won-Young Jo),李仁宰(In-Jae Lee),曺允鉉(Yun-Hyun Cho),具大鉉(Dae-Hyun Koo),全衍度(Yon-Do Chun) 대한전기학회 2006 전기학회논문지 B Vol.55 No.9
Cogging torque, the primary ripple component in the torque generated by permanent magnet (PM) motors, is due to the slotting on the stator or rotor. This article shows the reduction of cogging torque in a novel axial flux permanent magnet (AFPM) motor through the various design schemes. 3D finite element method is used for the exact magnetic field analysis. The effects of slot shapes and skewing of slot on the cogging torque and the average torque have been investigated in detail.
휴대 단말기용 MIMO 안테나의 격리도 향상에 관한 연구
윤인섭,염효가,김상욱,조윤현,박효달,Yoon, In-Seop,Yan, Xiao-Jia,Kim, Sang-Uk,Jo, Yun-Hyun,Park, Hyo-Dal 한국전자통신학회 2015 한국전자통신학회 논문지 Vol.10 No.9
본 논문에서는 neutralization line 구조를 이용하여 안테나 간의 격리도를 향상시킨 MIMO 안테나 구조를 설계하였다. 제안된 MIMO 안테나 구조의 크기는 $116mm{\times}64mm{\times}5mm$이며, ${\varepsilon}r=4.4$인 FR-4 유전체를 사용하여 설계하였다. 또한 두 안테나 간의 격리도를 확보하기 위해 neutralization line을 추가하였다. 측정결과는 VSWR 3:1 기준으로 LTE B13 대역을 만족시켰고, 격리도를 -15 dB 이하로 확보하였다. H-평면에서 전방향성 방사특성을 나타내었으며, LTE B13 대역에서 -2.61 dBi에서 -1.18 dBi까지의 이득과 33.49 %에서 46.45 %까지의 방사효율을 얻었다. 측정결과와 시뮬레이션 결과를 비교하여 제안된 MIMO 안테나는 이동통신 휴대 단말기에 적용 가능함을 확인할 수 있다. In this paper, neutralization line structure have been employed to improve the isolation between the MIMO antenna system. The proposed MIMO antenna size is $116mm{\times}64mm{\times}5mm$ and designed on FR-4(${\varepsilon}r=4.4$) ground substrate. Neutralization line was applied to enhance isolation between the each antenna elements. The fabricated antenna satisfied a VSWR below 3 in LTE band B13 and the isolation between the MIMO antenna system is presented below -15dB. On the H-plane, antenna shows an omnidirectional pattern. In LTE band B13, the antenna presents a gain of a -2.6dBi ~-1.18dBi and radiation efficiency of 33.49% ~ 46.45%. Comparing measurement result with the outcome of simulation, the proposed MIMO antenna is expected to be applied for mobile application.