http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
KF/MgO 촉매를 이용한 대두유의 전이에스테르화 반응
조용범 ( Yong Beom Jo ),전종기 ( Jong Ki Jeon ),박성훈 ( Sung Hoon Park ),박영권 ( Young Kwon Park ) 한국공업화학회 2012 공업화학 Vol.23 No.3
본 연구에서는 기존 MgO의 염기세기를 증가시켜 전이에스테르화 반응에 있어 보다 좋은 활성을 가지는 촉매를 만들 고자 하였다. MgO를 실험실에서 제조한 후 지지체로 사용하였으며 염기세기를 증가시키기 위하여 KF를 함침법으로 담지 하였다. BET, XRD, XRF, CO2 TPO로 촉매의 특성분석을 하였고, 대두유과 메탄올을 사용하여 바이오디젤을 합성 한 후 지방산메틸에스테르 함유량을 측정함으로써 촉매의 활성을 알아보았다. 결과적으로, KF를 30% 담지한 촉매가 활성이 가장 좋은 것으로 나타났다. 이는 전이에스테르화 반응에서 중간세기 염기도가 더 많이 관여하기 때문으로 보인다. The basic strength of the MgO catalyst was enhanced by impregnating it with KF to synthesize a highly active catalyst for the bio-diesel production. To increase basicity, KF impregnated on synthesized MgO in laboratory. The synthesized catalyst was characterized using N2 adsorption-desorption, X-Ray diffraction, X-Ray fluorescence, and CO2 temperature programmed desorption analyses. Bio-diesel was produced from soybean and methanol and its fatty acid methyl ester content was measured to evaluate the activity of the catalyst. The catalyst impregnated with 30 wt% KF exhibited the highest activity, which was attributed to its abundant intermediate base site.
연구 논문 : KOH/KL 제올라이트 및 Ca/미역화를 이용한 대두유 전이에스테르화 반응
조용범 ( Yong Beom Jo ),박성훈 ( Sung Hoon Park ),전종기 ( Jong Ki Jeon ),박영권 ( Yong Kwon Park ) 한국공업화학회 2012 공업화학 Vol.23 No.6
본 연구에서는 표면적이 높은 제올라이트나 촤를 지지체로 이용해 알칼리금속을 담지시킴으로써 염기 세기를 증가시켜 전이에스테르화 반응에 있어 보다 좋은 활성을 가지는 고체촉매를 만들고자 하였다. 제올라이트는 KOH 수용액으로 담지하였고, 미역촤는 calcium nitrate를 담지하여 염기의 세기를 증가시켰다. Hammett 지시약과 CO2-TPD를 통하여 촉매의 특성을 분석하였다. 대두유과 메탄올을 사용하여 바이오디젤을 합성한 후 지방산 메틸에스테르 함유량을 측정 함으로서 촉매의 활성을 알아보았다. 일정량까지는 담지량과 활성이 비례하였으나, 과량 담지 시 오히려 활성이 감소하는 결과를 보였다. Solid base catalysts for biodiesel production were synthesized by impregnating basic metal species on two support materials with large specific surface area : zeolite and pyrolysis char. KL zeolite and Undaria pinnatifida char were impregnated with KOH aqueous solution and calcium nitrate solution, respectively, to enhance the basic strength. The catalysts synthesized were characterized using Hammett indicators and CO2-TPD analysis. Biodiesel was produced using soybean oil and methanol over the catalysts synthesized. The content of fatty acid methyl esters was measured to evaluate the catalytic activity. Generally, the catalytic activity increased with increasing quantity of basic metal impregnated but impregnation of excessive amount of metal could cause reduction in the activity.
김찬모,조용범,Kim, Chan-Mo,Jo, Yong-Beom 대한전자공학회 2001 電子工學會論文誌-SD (Semiconductor and devices) Vol.38 No.6
본 논문은 GPS 수신기를 이용한 정밀 동기 클록 발생기의 PLD 구현에 관한 것이다. GPS 수신기에서는 동기화 된 IPPS 신호를 발생하는데, 이를 이용하여 시각동기와 클록 보정 등을 행할 수 있다. 본 연구에서는 저가격의 오실레이터로부터 높은 정확도의 클록을 발생시킬 수 있는 DPLL 구조의 정밀 동기 클록 발생기를 ALTERA FLEX EPM6016TC144-3 PLD를 이용하여 구현하였다. 이를 이용하여 GPS 수신기를 함께 이용하여 높은 정밀도를 가지며 동기화 된 1MHz 클록을 발생시키는 하드웨어를 설계하고 구현한다. In this paper, the precise synchronized clock generator using GPS receiver is presented. The GPS receiver provides a synchronized IPPS signal which guaranties a reliable standard time mark. This signal allows us to do time synchronization and correct the time step. We designed and implemented the precise synchronized clock generator based on DPLL in order to generate a high-resolution clock from a low-cost inaccurate oscillator with ALTERA FLEX EPM6016TC144-3. We also implemented a hardware unit and proved that the unit provides 1MHz clock output which had a high resolution and accuracy when it was combined with GPS receiver.
신경망을 이용한 실시간 멀티프로세서 스케줄링 알고리즘과 하드웨어 설계
이재형,이강창,조용범,Lee, Jae-Hyeong,Lee, Gang-Chang,Jo, Yong-Beom 대한전자공학회 2000 電子工學會論文誌-CI (Computer and Information) Vol.37 No.4
본 논문은 실시간 멀티프로세서 스케줄링 문제를 효과적으로 해결하는 신경망 알고리즘을 제안한다. 제안된 알고리즘은 대표적인 신경망 모델인 홉 필드 네트워크를 근간으로 태스크의 처리요구에 대해 지정된 시간이내에 처리할 수 있는 실시간 시스템을 신경망의 장점인 병렬처리가 가능하도록 구현하였다. 본 알고리즘의 성능을 비교하기 위하여 기존에 실시간 멀티프로세서 스케줄링을 위해 연구되는 EDA와 LLA의 두 알고리즘과 비교한다. 제안된 알고리즘은 VHDL을 이용하여 하드웨어로 설계한다. This paper proposes a neural network algorithm for real-time multiprocessor scheduling problem. The proposed algorithm is developed base on Hopfield neural network for a benefit of parallel processing, in order to finish a requested task within a deadline time. To compare the performance of the proposed algorithm, we used EDA and LLA algorithm that has studied real-time multiprocessor scheduling before. The proposed algorithm is implemented hardware using VHDL.
디지털영상처리기술을 이용한 비접촉식 유체-구조물 연동운동 3차원 측정시스템 개발에 관한 연구
도덕희(DEOG-HEE DOH),조효제(HYO-JAE JO),상지웅(JI-WOONG SANG),황태규(TAE-GYU HWANG),조용범(YONG-BEOM CHO),편용범(YONG-BEOM PYEON) 한국해양공학회 2004 韓國海洋工學會誌 Vol.18 No.4
A simultaneous measurement system that can analyze the flow-structure interaction has been developed. This system consists of four CCD cameras, two for capturing instantaneous flow fields and two for tracking a solid body. The three-dimensional vector fields around a cylinder are measured, while the motion of the cylinder forced by the flow field is measured, simultaneously, with the constructed system. The cylinder is suspended in the working fluid of a water channel, and the surface of the working fluid is forced sinusoidally to make the cylinder bounced. Reynolds number for the mean main stream is about 3500. The interaction between the flow fields and the cylinder motion is examined quantitatively.