DVCR용 ATF(Automatic Track Following) 블록의 새로운 설계

조성일,김성욱,하인중,김정태,나일주,Cho, Seong-Il,Kim, Sung-Wook,Ha, In-Joong,Kim, Jeong-Tae,Na, Il-Ju 대한전자공학회 1998 電子工學會論文誌, S Vol.s35 No.8

최근에 영상 및 음성 데이터의 양은 크게 증가하고 있다. 이러한 경향에 따라 고밀도 자기기록 시스템이 필요하게 되었고 테이프의 트랙은 더욱 더 좁아지게 되었다. 따라서 DVCR(digital video cassette recorder)에서는 재생시에 캡스탄 모터의 속도와 위상을 정밀하게 제어하여, 헤드가 트랙을 따라 정확하게 주행하도록 유지시켜주는 캡스탄 서보시스템이 필요하게 되었다. 이를 위하여 DVCR에서는 ATF(Automatic Track Following)방식을 사용한다. 본 논문에서는 이산 푸리에 변환(discrete Fourier transform)을 이용한 새로운 DVCR용 ATF 블록의 설계방법을 제안하였다. 제안한 ATF 블록을 ALTERA사의 FPGA에 구현하여 실제 DVCR 시스템에서 그 성능을 시험하였다. 실험을 통하여 본 논문에서 제안한 방식이 기존의 디지털 저역통과필터(lowpass filter)를 사용한 구현법에 비해 비용면에서 더 효과적임을 검증하였다. 또한 로직게이트 수가 기존의 방법에 비하여 약 20% 감소함을 확인하였다. Recently, the amount of image and audio data has been increasing dramatically for high performance. According to this trend, a high-density magnetic recording system is necessitated and the tracks of magnetic tapes are getting narrower. This, in turn, requires the capstan servo system of the magnetic recording system such as DVCR to control precisely the speed and position of the capstan motor. Especially, in case of play-back, the capstan servo system should be able to position and maintain the head on the desired place of the track. To meet this requirement, digital camcorders use ATF (Automatic Track Following). In this paper, a new ATF block using discrete Fourier transform is proposed. The proposed ATF block was designed and implemented in ALTERA FPGA chips and fully tested in a real DVCR system. It is shown through experiments that the new ATF block is more cost-effective than other existing ATF blocks using digital lowpass filters. In particular, the number of logic gates can be reduced by 20% in average, compared to the existing ATF's.

(${\eta}^5-Cp^*$)(Ir-B3)(1,2-S,S($CH_2SiMe_3$)-o-carborane) ($C_{16}H_{35}B_{10}IrS_2Si$)의 합성 및 결정구조

조성일,Cho, Sung-Il 한국결정학회 2007 韓國結晶學會誌 Vol.18 No.1

An Organometallic compound, $C_{16}H_{35}B_{10}IrS_2Si$, was synthesized from o-carborane, $Cp^*Ir(S_2C_2B{10}H_{10})$, and $Me_3SiCHN_2$. The molecular structure of this complex has been determined by X-ray diffraction. Crystallographic data : monoclinic, space group $P2_1/n$, $a=10.1986(12)\;{\AA}$, $b=14.834(5)\;{\AA}$, $c=17.139\;{\AA}$, ${\beta}=92.24(2)^{\circ}$, Z=4, $V=2591.0(14)\;{\AA}^3$. The structure was solved by direct methods and refined by full-matrix leat-squares methods to give a model with a reliability factor R=0.053 for 5080 reflections. 유기금속 화합물 $C_{16}H_{35}B_{10}IrS_2Si$를 o-carborane으로 출발하여 $Cp^*Ir(S_2C_2B{10}H_{10})$을 합성하고, $Me_3SiCHN_2$를 가하여 합성하였다. X-선 회절법을 이용하여 $C_{16}H_{35}B_{10}IrS_2Si$ 화합물의 분자구조를 규명하였다. 이 화합물의 결정학적 자료는 monoclinic, space group $P2_1/n$, $a=10.1986(12)\;{\AA}$, $b=14.834(5)\;{\AA}$, $c=17.139\;{\AA}$, ${\beta}=92.24(2)^{\circ}$, Z=4, $V=2591.0(14)\;{\AA}^3$이다. 결정 구조는 직접법으로 해석하였으며, 완전행렬최소자승법을 정밀화 하였으며 5080개의 회절 반점에 대하여 최종 신뢰도 인자 R=0.053인 분자모형을 구하였다.

1-(Dimethylbromotin)-2-[(methoxyl) methly]-o-carborane $(C_{16}H_{21}B_{10}BrOSn)$의 합성 및 결정 구조

조성일,강상욱,장경화,Cho Sung Il,Kang Sang Ook,Chang K. 한국결정학회 2004 韓國結晶學會誌 Vol.15 No.2

유기금속 화합물 $(C_{16}H_{21}B_{10}BrOSn)$를 o-carborane으로부터 출발하여 closo-1-[(methoxyl) methyl]-o-carborane$(HCab^o)$를 합성하고, $SnMe_2Br_2$을 가하여 합성하였다. X-선 회절법을 이용하여 $(C_{16}H_{21}B_{10}BrOSn)$ 화합물의 분자구조를 규명하였다. 이 화합물의 결정학적 자료는 orthorhombic, space group Pna2, a =17.9292(15)$\AA$, b= 7.2066(4)$\AA$, c=13.0582(10)$\AA$, Z=4, V=1687.2(2)$\AA^3$이다. 결정 구조는 직접법으로 해석하였으며, 1724개의 회절 반점에 대하여 최종 신뢰도 인자 R=0.0574인 분자 모형을 구하였다. An organometallic compound, $(C_{16}H_{21}B_{10}BrOSn)$, was synthesized from o-carborane, closo-1-[(methoxyl)methyl]-o-carborane $(HCab^o)$, and $SnMe_2Br_2$. The molecular structure of this complex has been determined by X-ray diffraction. Crystallographic data: orthorhombic, space group Pna2, a = 17.9292(15)$\AA$, b= 7.2066(4)$\AA$, c=13.0582(10)$\AA$, Z=4, V=1687.2(2) $\AA^3$. The structure was solved by direct methods and refined by full-matrix least-squares methods to give a model with a reliability factor R=0.0574 for 1724 reflections.

$Me_2Pt(PPh_2CH_2C(t-Bu)=N-N=CMe(2-py)-\kappa^2N,P)$의 합성 및 결정 구조

조성일,강상욱,장경화,Cho Sung Il,Kang Sang Ook,Chang K. 한국결정학회 2004 韓國結晶學會誌 Vol.15 No.2

유기금속 착화합물 $Me_2Pt(PPh_2CH_2C(t-Bu)=N-N=CMe(2-py)-\kappa^2N,P)$을 phosphino hydrazone $Ph_2PCH_2C(t-Bu)=NNH_2$와 2-acetylpyridine와 $[PtMe2({\mu}-SMe_2)]_2$를 사용하여 합성하였다. X-선 회절법을 이용하여 이 화합물의 분자 구조를 규명하였다. 이 백금 화합물의 결정학적 자료는 monoclinic, space group $P2_1/n,\;a=11.6926(7)\;{\AA},\;b=15.6607(19)\;{\AA},\; c=14.6125(6)\;{\AA},\;\beta=93.018(4)^{\circ},\;Z=4,\;V=2672.0(4)\;{\AA}^3$이다. 결정 구조는 직접법으로 해석하였으며, 5238개의 회절 반점에 대하여 최종 신뢰도 인자 R=0.0363인 분자 모형을 구하였다. An organometallic complex. $Me_2Pt(PPh_2CH_2C(t-Bu)=N-N=CMe(2-py)-\kappa^2N,P)$ was synthesized from phosphinohydrazone $Ph_2PCH_2C(t-Bu)=NNH_2$, 2-acetylpyridine, and $[PtMe2({\mu}-SMe_2)]_2$. The molecular structure of this complex has been determined by X-ray diffraction. Crystallographic data: monoclinic, space group $P2_1/n,\;a=11.6926(7)\;{\AA},\;b=15.6607(19)\;{\AA},\; c=14.6125(6)\;{\AA},\;\beta=93.018(4)^{\circ},\;Z=4,\;V=2672.0(4)\;{\AA}^3$. The structure was solved by direct methods and refined by full-matrix least-squares methods to give a model with a reliability factor R = 0.0363 for 5238 reflections.

$[({\eta}^5-Cp)Co]_2$ (1,2-S,S-o-Carborane) $(C_{12}H_{20}B_{10}S_2Co_2)$의 합성 및 결정구조

조성일,Cho, Sung-Il 한국결정성장학회 2008 韓國結晶成長學會誌 Vol.18 No.2

유기금속 화합물 $C_{12}H_{20}B_{10}S_2Co_2$를 o-carborane으로 출발하여 $Cp^*Co(S_2B_2B_{10}H_{10})$을 합성하고, $BH_3{\cdot}THF$를 가하여 합성하였다. X-선 회절법을 이용하여 $C_{12}H_{20}B_{10}S_2Co_2$ 화합물의 분자구조를 규명하였다. 이 화합물의 결정학적 자료는 monoclinic, space group Cc, a=15.981(4) ${\AA}$, b=15.478(17) ${\AA}$, c=12.0562(17) ${\AA}$, ${\beta}=115.063(16)^{\circ}$, Z=4, V=9683(4) ${\AA}^3$이다. 결정 구조는 직접법으로 해석하였으며, 완전행렬최소자승법을 정밀화 하였으며 9948개의 회절 반점에 대하여 최종 신뢰도 인자 R=0.0630인 분자모형을 구하였다. An Organometallic compound, $C_{12}H_{20}B_{10}S_2Co_2$, was synthesized from o-carborane, $Cp^*Co(S_2B_2B_{10}H_{10})$ and $BH_3{\cdot}THF$. The molecular structure of this complex has been determined by X-ray diffraction. Crystallographic data: monoclinic, space group Cc, a=15.981(4) ${\AA}$, b=15.478(17) ${\AA}$, c=12.0562(17) ${\AA}$, ${\beta}=115.063(16)^{\circ}$, Z=4, V=9683(4) ${\AA}^3$. The structure was solved by direct methods and refined by full-matrix leat-squares methods to give a model with a reliability factor R = 0.0630 for 9948 reflections.

탄소 지지체의 산소 작용기가 백금 촉매 특성에 미치는 영향

조성일,전선규,문상흡 ( Sung Il Cho,Sun Gyu Chun,Sang Heup Moon ) 한국화학공학회 1996 화학공학의이론과응용 Vol.2 No.2

사회경제적 위치에 따른 청소년의 건강과 건강 관련 행태의 차이 : 한국청소년패널 조사 결과

조성일,양승미,이무송,강영호,Cho, Sung-Il,Yang, Seung-Mi,Lee, Moo-Song,Khang, Young-Ho 대한예방의학회 2005 예방의학회지 Vol.38 No.4

Objective : This study examined the socioeconomic differentials for the health and health related behaviors among South Korean middle school students. Methods : A nationwide cross-sectional interview survey of 3,449 middle school second-grade students and their parents was conducted using a stratified multi-stage cluster sampling method. The response rate was 93.3%. The socioeconomic position indicators were based on self-reported information from the students and their parents: parental education, father's occupational class, monthly family income, out-of-pocket expenditure for education, housing ownership, educational expectations, educational performance and the perceived economic hardships. The outcome variables that were measured were also based on the self-reported information from the students. The health measures included self-rated health conditions, psychological or mental problems, the feelings of loneliness at school, the overall satisfaction of life and the perceived level of stress. The health related behaviors included were smoking, alcohol drinking, sexual intercourse, violence, bullying and verbal and physical abuse by parents. Results : Socioeconomic differences for the health and health related behaviors were found among the eighth grade boys and girls of South Korea. However, the pattern varied with gender, the socioeconomic position indicators and the outcome measures. The prevalence rates of the overall dissatisfaction with life for both genders differed according to most of the eight socioeconomic position indicators. All the health measures were significantly different according to the perceived economic hardship. However, the socioeconomic differences in the self-rated health conditions and the psychosocial or mental problems were not clear. The students having higher socioeconomic position tended to be a perpetrator of bullying while those students with lower socioeconomic position were more likely to be a victim. Conclusions : The perceived economic hardships predicted the health status among the eighth graders of South Korea. The overall satisfaction of life was associated with the socioeconomic position indicators. Further research efforts are needed to explore the mechanisms on how and why the socioeconomic position affects the health and health related behaviors in this age group.

칼슘이 결장뉴 K-경축에 미치는 영향

조성일,엄대용,이상돈,Cho, Sung-Il,Uhm, Dae-Yong,Rhee, Sang-Don 대한생리학회 1982 대한생리학회지 Vol.16 No.1

The in vitro experiments for isometric contraction were done to investigate the different action mechanism of calcium ion on phasic and tonic components of K-contracture in guinea pig's taenia coli. The results were as follows: 1) The degrees of K-contracture were increased gradually from 4 mM to 15, 20, 40 & 100 mM of$[K^+]_0$. The maximal developed tension in tonic component was observed in 100 mM of $[K^+]_0$. 2) The phasic components were not so affected by 2, 4, 8 & 16 mM of $[Ca^{++}]_0$ in 100 mM K-contracture, but the tonic components were gradually increased in a dose-responsive manner. 3) The K-contracture was not influenced by norepinephrine, 1 mg/l, but was completely abolished by verapamil, 2 mg/l. 4) The phasic component was little affected by verapamil, 0.01 mg/l, 0.1 mg/l, and 1 mg/l, but the tonic component was completely disappeared at the concentration of verapamil 1 mg/l. The above results suggest that $[Ca^{++}]_0.$ primarily affected the tonic component than the phasic component of K-contracture in guinea pig's taenia coli.

원자방출 분광분석을 위한 수평형 유도결합 플라스마의 개발과 납 검출한계 비교

조성일,한명섭,이상화,이종해,우진춘,Cho, Sung Il,Han, Myung Sub,Lee, Sang Hwa,Lee, Joung Hae,Woo, Jin Chun 대한화학회 1997 대한화학회지 Vol.41 No.6

유도코일을 5회 감고, 외측 석영관 길이를 일반적인 ICP(Inductively Coupled Plasma) 토오치에서 보다 50 mm 더 길게 제작한 수평형 ICP 방출원을 제작한 후, ICP 방출분광분석기를 구성하였다. 신호대 잡음비 및 바탕선의 세기를 고주파 출력, 시료 유량, 알곤가스 유량 그리고 차단가스 유량변화에 대하여 측정하고 최적조건을 구했다. 이들 조건에서,수직형 플라스마와 비교하여 분광분석학적으로 비슷한 정도의 특징을 가진 바탕선 스펙트럼을 파장범위 200~500 nm에서 얻었다. 납(II), 220.35 nm의 방출선에서 검출한계가 11 ppb로 산출되었으며, 수직형과 비교하여 약 5배 낮은 값을 보였다. An ICP(Inductively Coupled Plasma) emission spectrometer was developed with an axially viewed ICP source incorporated by a 5-turned induction coil and a torch, outer quartz tube of which was 50 mm longer than that used in conventional ICP/AES(Inductively Coupled Plasma Atomic Emission Spectrometry). The Optimization of the system has been performed in terms of the determination of signal-to-noise ratio and background intensity at various rf powers, sample flow rates, argon gas flow rates and cut-off gas flow rates. The spectro-analytical characteristics of the spectrum obtained between 200 and 500 nm was revealed to be similar compared with a vertically viewed ICP source. The detection limit of Pb(Ⅱ) at 220.35 nm was 11 ppb which was 5 times lower than that obtained with a vertically viewed ICP source.

단열체계 및 수리전도도의 해석신뢰도 향상을 위한 평가방법 연구

조성일 ( Sung Il Cho ),김천수 ( Chun Soo Kim ),배대석 ( Dae Seok Bae ),김경수 ( Kyung Su Kim ),송무영 ( Moo Young Song ) 대한지질공학회 2005 지질공학 Vol.15 No.2

본 연구는 지하시험시설을 이용한 수리지질환경연구의 대안으로, 지하유류저장시설 건설과정 중 조사된 자료를 이용하여 지표조사단계에서 예측된 자료와 저장공동 굴착 시 확인된 자료의 대비를 통해 불확실성이 높은 단열 및 수리인자의 지하분포특성을 해석하여 조사방법의 문제점을 도출하고 보완방안을 모색해 보고자 하였다. 지표조사단계에서 예측된 6개 단열대 중 지하공동 심도에서 그 위치와 방향이 비교적 일치하는 단열대는 NE-1 단 하나로 예측신뢰도는 매우 낮다. 본 연구에서는 지하공동 내 NE-1 단열대의 분포특성을 토대로 지표조사단계에서 BHTV 이미지를 이용한 정량적인 분류기준을 제시하였다. 암반단열은 심도가 깊어짐에 따라 단열의 주 방향이 바뀌고 길이 및 빈도는 감소하는 경향을 보이고 있다. 조사대상의 경사변화와 조사방향 및 조사규모 등에 따라 오차가 발생될 수 있으므로 조사에 따른 편의(investigation bias)를 가능한 한 최소화하여야 할 것이다. 지표조사단계에서 수리적 연결성에 대한 해석은 시추공 내에서 주입이나 양수를 통한 지하수체의 교란 시 구간에 따른 수리지질학적 특성파악이 가능한 이중수위측정시설이나 다중패커시스템을 통하여 수위변화 및 지하수의 지화학특성에 대한 구간별 정밀계측이 요구된다. 수직 및 수평수벽공에 의해 계측된 공동주변 수리전도도의 기하평균은 지표조사 시 지표부 파쇄대 및 풍화대 영역을 제외한 평균값보다 약 2~3배 작은 값을 나타내며, 수평수벽공의 기하평균 역시 수직수벽공보다 약 6배정도 작게 나타났다. 수리전도도 역시 신뢰도 향상을 위해서는 시험공의 경사방향이 편중되지 않도록 조사편의를 최소화하고, 매질의 특성 및 시험목적을 고려하여 시험방법 및 해석식이 적용되어야 할 것으로 판단된다. This study aims to assess the problems with investigation method and to suggest the complementary solutions by comparing the predicted data from surface investigation with the outcome data from underground cavern. In the study area, one(NE-1) of 6 fracture zones predicted during the surface investigation was only confirmed in underground caverns. Therefore, it is necessary to improve the confidence level for prediction. In this study, the fracture classification criteria was quantitatively suggested on the basis of the BHTV images of NE-1 fracture zone. The major orientation of background fractures in rock mass was changed at the depth of the storage cavern, the length and intensity were decreased. These characteristics result in the deviation of pre- dicted predicted fracture properties and generate the investigation bias depending on the bore hole directions and investigated scales. The evaluation of hydraulic connectivity in the surface investigation stage needs to be analyzed by the groundwater pressures and hydrochemical properties from the monitoring bore hole(s) equipped with a double completion or multi-packer system during the test bore hole is pumping or injecting. The hydraulic conductivities in geometric mean measured in the underground caverns are 2 -3 times lower than those from the surface and furthermore the horizontal hydraulic conductivity in geometric mean is six times lower than the vertical one. To improve confidence level of the hydraulic conductivity, the orientation of test hole should be considered during the analysis of the hydraulic conductivity and the methodology of hydro- testing and interpretation should be based on the characteristics of rock mass and investigation purposes.