http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
축소모형실험을 통한 토목섬유 보강토옹벽의 수평변위 및 수직응력 평가
조삼덕,이광우,유승경 한국지반신소재학회 2017 한국지반신소재학회 논문집 Vol.16 No.4
보강토체 상부에 작용하는 상재하중과 보강재의 인장강도 및 포설 단수가 보강토옹벽의 변형거동에 미치는 영향을 평가하기 위해 7종류의 축소모형 보강토옹벽을 축조하여 상재하중 재하실험을 수행하였다. 축소모형 보강토옹벽은 100cm×140cm×100cm 크기의 모형토조 내에서 1m 높이로 축조하였으며, 인장강도가 상이한 3종류의 보강재를 사용하여 포설 단수를 5단, 7단, 9단으로 변화시키고, 5종류(50, 100, 150, 200, 250kPa)의 상재하중을 단계적으로재하하면서 전면벽체의 수평변위와 보강재의 인장변형률 및 보강토체 저면의 수직응력 등을 측정하여 분석하였다. 분석 결과, 전면벽체의 수평변위는 보강토옹벽 하단부에서 가장 작고 보강토옹벽 하단으로부터 0.7H (H : 옹벽높이) 지점에서 가장 큰 비선형적인 형태를 보여주며, 상재하중이 작고 보강재의 인장강도가 클수록 보강재의상대적인 보강효과가 크게 발현되어 보강토체 하부의 수직응력이 작게 나타남을 알 수 있었다. This paper presents a study of reinforced earth model wall reinforced by geosynthetics subjected to vertical surcharge. 7 types of reinforced earth model wall were constructed in the model box(100 cm×140 cm×100 cm) to assess the deformation and stress behavior of model walls according to different tensile strength and laying number of reinforcement and surcharge pressures. 3 types of geosynthetics that have different tensile strength were used as reinforcement. The test was carried out by changing the number of reinforcement to 5, 7, 9, and surcharge pressure to 50, 100, 150, 200, 250 kPa. The model test found that the maximum lateral displacements occurred at the 0.7 H (H : Wall height) position from the bottom of the model wall and vertical stress was low in the smaller surcharge pressure and the larger tensile strength of reinforcement.
I형 연결판을 사용한 지오그리드 보강토옹벽의 현장계측 및 거동분석
조삼덕,이광우,함태규,문희정 한국토목섬유학회 2006 한국토목섬유학회 학술발표회 Vol.2006 No.12
In this paper, in order to investigate the field application of Reinforced Soil Wall with Geogrid connected by I-shape Plate, in-suit tests and field monitoring were performed on 7.5m height embankment wall. After completion of the structure, approximately 8 months of monitoring was carried out on the structure to check displacement, settlement, soil pressures and tension strain of Reinforcing materials. Based on the results, it was realized that the Reinforced Soil Wall with Geogrid connected by I-shape Plate had fine field application.
다양한 현장내시공성시험에 근거한 토목섬유 보강재의 시공성 감소계수 평가
조삼덕,이광우 한국지반신소재학회 2018 한국지반신소재학회 논문집 Vol.17 No.4
In this paper, to investigate the influence of installation damage, a variety of full-scale field installation tests with 15 geosynthetics reinforcements and fill materials of various grain size distribution have been performed. The full-scale field installation test was conducted with reference to the FHWA (2009) guidelines. The tensile strength tests were performed by sampling up to 20 specimens randomly from the excavated geosynthetics reinforcements after compaction of fill material, and the degree of decrease in tensile strength of reinforcements due to compaction was analyzed based on the experiment results. It was found that the degree of tensile strength reduction of geosynthetics reinforcements due to the compaction of fill material is greatly influenced by the type of reinforcement and the maximum diameter of fill material. In addition, it was found that the strength reduction ratio of PET geogrid (PVC coating) with relatively small stiffness was greatest, and that the larger the maximum grain size of the fill material, the greater the strength reduction ratio. And also, a more reasonable evaluation method for the installation damage reduction factor of geosynthetics reinforcements is proposed based on the results of full-scale field installation tests in present study and the existing test results. 본 연구에서는 토목섬유 보강재의 시공중 손상 정도를 규명하기 위하여 국내에서 많이 사용되고 있는 주요 토목섬유 보강재제품(7개 사의 15 종류)을 대상으로 다양한 입도의 성토재료를 적용한 현장내시공성시험을 수행하였다. 현장내시공성시험은FHWA(2009) 지침을 참조하여 수행하였으며, 다짐시공 후 추출된 토목섬유 보강재 시료에서 인장강도 시편(크기 0.2m × 1.4m)을 최대 20개 이상 균등하게 샘플링하여 인장강도시험을 수행함으로써 시공에 따른 인장강도 감소 정도를 분석하였다. 분석 결과, 성토재료의 다짐시공으로 인한 토목섬유 보강재의 인장강도 감소 정도는 토목섬유 보강재의 종류와 성토재료의최대입경에 크게 영향을 받으며, 비교적 강성이 작은 PET 결합형 지오그리드(PVC 코팅)의 인장강도 감소율이 가장 크게나타났고, 전반적으로 성토재료의 최대입경이 클수록 인장강도 감소율은 더욱 크게 나타남을 알 수 있었다. 또한, 이 시험결과와 함께 기 수행된 현장내시공성시험 결과들을 분석하여 토목섬유 보강재의 시공성 감소계수를 보다 합리적으로 평가할 수있는 방안을 제시하였다.