http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Top emission 유기발광적소자 적용을 위한 도핑된 indium tin oxide 박막의 전기적 광학적 특성 연구
정철호,강용규,윤대호,Jung, C.H.,Kang, Y.K.,Yoon, D.H. 한국결정성장학회 2008 한국결정성장학회지 Vol.18 No.4
절연성 및 전도성 12CaO ${\cdot}7Al_2O_3$ (Cl2A7)이 도핑된 ITO 박막을 유리기판 위에 radio frequency(rt) magnetron 스퍼터링 방법으로 절연성 및 전도성 Cl2A7 타겟 칩의 개수를 변화시키면서 증착하였다. 이러한 박막들의 구조적, 전기적, 광학적 특성을 살펴보았다. Cl2A7 타겟 칩의 개수가 증가함에 따라 박막의 캐리어 농도는 감소하고, 비저항은 증가하였다. 박막의 광 투과도는 가시광 영역에서는 80% 이상의 값으로 나타났다. Grain의 크기의 변화는 결정성과 표면 거칠기에 크게 영향을 미친다는 것이 확인되었다. Insulating and conducting 12CaO ${\cdot}7Al_2O_3$ (Cl2A7)-doped indium tin oxide (ITO) (ITO:Cl2A7 insulator and electride) thin films were deposited on glass substrates by an RF magnetron co-sputtering method with increasing number of insulating and conducting Cl2A7 target chips. The structural, electrical and optical properties of these films were investigated. The carrier concentration decreased and resistivity increased in the films with increasing number of Cl2A7 target chips. The optical transmittance of all of the thin films was above 80 % in the visible wavelength range. The structural property and surface roughness of the films were examined and the decrease of crystallinity and surface roughness was strongly dependent on the change of grain size.
고해상도 SAR 영상 형성 및 품질 분석을 위한 시뮬레이터
정철호,오태봉,곽영길,Jung, Chul-Ho,Oh, Tae-Bong,Kwag, Young-Kil 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.8
고해상도 레이다 영상은 탑재체 및 플랫폼 등 시스템 설계 변수에 비교적 민감할 수 있다. 본 논문에서는 시스템 파라미터 기반의 2차원 SAR 영상 형성 및 영상 품질 분석을 위한 시뮬레이터를 구현하였다. 본 논문에서 구현한 시뮬레이터는 유연성과 확장성을 고려하여 주요 모듈로 구성하고 Matlab코드를 이용하여 GUI 기반으로 구성하였다. 주요 기능은 SAR 시스템 설계 파라미터를 이용하여 SAR 신호를 생성할 수 있으며, RDA(Range-Doppler Algorithm)을 이용하여 영상을 형성하고 SAR시스템 파라미터가 영상의 질에 미치는 영향을 다양하게 분석할 수 있다. 특히, 본 시뮬레이터는 시스템 환경에 따라 파라미터 설정을 용이하게 할 수 있으므로 항공기 및 위성 탑재체 등의 SAR 시스템 설계와 SAR 영상 품질 분석에 효과적으로 활용할 수 있다. High resolution synthetic aperture radar image could be sensitive to the various parameters of the payload, platform, and ground system. In this paper, a parameter based SAR simulator is presented for two-dimensional image formation and image quality analysis. Functional modules are implemented by Matalb code and GUI for the flexibility and expandability. Main function of this simulator includes the SAR input signal generation, range-doppler algorithm(RDA) based SAR image formation, and the SAR image quality analysis which is relevant to the SAR system design parameters. This simulator can effectively be used for the SAR image quality performance evaluation, which can be applicable to the airborne as well as spaceborne SAR system design and analysis.
정철호(Chul-Ho Jung),고재섭(Jae-Sub Ko),최정식(Jung-Sik Choi),전영선(Young-Sun Jun),김도연(Do-Yeon Kim),정병진(Byung-Jin Jung),정동화(Dong-Hwa Chung) 한국조명·전기설비학회 2008 한국조명·전기설비학회 학술대회논문집 Vol.2008 No.5월
The paper proposes a novel control algorithm for tracking maximum power of PV generation system. The maximum power of PV array is determinated by a insolation and temperature. Prior considered the term in PV generation system is how maximum power point is accurately tracked. The paper proposes a FNN(Fuzzy Neural-Network) control algorithm so as to accurately track those maximum power points. The proposed control algorithm comprises the antecedence part of fuzzy rule and clustering method, multi-layer neural network in the consequent part. FNN has the advantages which are depicted both high performance and robustness in Fuzzy control and high adaptive control in Neural Network Specially, it can show the outstanding control performance for parameter variations appling to non-linear character of PV array. In paper, the tracking speed and the accuracy prove the validity through comparing a proposed algorithm with a conventional one.
DPCA 기법을 이용한 SAR-GMTI 시스템에서 지상 이동 표적 오차 보상 기법 및 성능 분석
정재훈(Jae-Hoon Jung),정정수(Jung-Soo Jung),정철호(Chul-Ho Jung),곽영길(Young-Kil Kwag) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.11
SAR-GMTI는 고해상도 영상과 동시에 차량, 기차와 같은 지상의 이동 표적을 탐지하여 정보를 제공하는 시스템이다. 본 논문에서는 항공기 탑재 측면 관측 영상 레이다에서 지상 이동 표적을 탐지하는 DPCA 기법에 기반하여 지상 이동 표적의 도플러 특성에 따른 영상 내 심각한 위치 오차와 퍼짐 현상을 분석하였다. 그리고 표적의 속도를 거리와 방위 방향으로 나누어 영상에서 위치 오차와 퍼짐 현상을 보상하며, 추정된 표적 속도와 퍼짐의 양을 정량화하여 제안된 보상 기법의 성능을 검증한다. The velocity and acceleration of the ground moving target can cause the target position to be displaced and defocused in the SAR image. In this paper, the displacement compensation scheme is presented to correct the displaced position and defocused moving target image in the DPCA based SAR-GMTI system. The influence of the ground moving target due to the velocity and acceleration is analyzed in range and azimuth directions, and its compensation method is presented with the simulation results. The performance of the proposed method is compared with respect to the estimated velocity and defocused quantity in both range and azimuth directions.
정철호(Chul-Ho Jung),이정효(Jung-Hyo Lee),이희준(Hee-Jun Lee),김영렬(Young-Real Kim),원충연(Chung-Yuen Won) 전력전자학회 2011 전력전자학술대회 논문집 Vol.2011 No.7
본 논문에서는 태양광 모듈을 이용한 발전 시스템과 전기자동차용 양방향 배터리 시스템을 결합한 하이브리드 시스템을 제안 하였다. 병렬 구조를 가진 시스템을 전력제어 함으로써 배터리의 전력을 효율적으로 사용할 수 있다. 이에 따라 제안된 알고리즘의 타당성을 시뮬레이션 모델을 통하여 검증하였다.
실제 클러터 배경에서 SAR 영상 임펄스 응답 특성 분석
정철호 ( Chul Ho Jung ),정재훈 ( Jae Hoon Jung ),오태봉 ( Tae Bong Oh ),곽영길 ( Young Kil Kwag ) 大韓遠隔探査學會 2008 大韓遠隔探査學會誌 Vol.24 No.2
영상 레이다(SAR)는 주야간, 일조량에 관계없이 전천후로 영상획득이 가능하여 군사용으로는 물론 과학 민수용으로 광범위하게 활용된다. SAR 시스템에서는 고도, 운용 주파수, PRF 등의 다양한 시스템 설계 파라미터로부터 생성된 임펄스 응답 함수(impulse response function)를 분석하여 공간해상도, PSLR, ISLR 등 영상품질 성능 파라미터의 추정이 가능하다. 그러나 모델링된 임펄스 응답 특성은 주변 클러터 환경이 고려되지 않은 이상적인 경우이므로 실제 주변 클러터 환경을 고려한 SAR 영상품질 분석 기법이 필요하다. 본 논문에서는 먼저 주요 SAR 시스템 파라미터를 기반으로 SAR 점표적 원시 데이터를 생성하고, 거리-도플러 알고리듬(range-Doppler algorithm)을 이용하여 임펄스 응답 데이터를 형성한다. 그리고 실제 SAR 영상의 일부분을 추출하여 주변 배경 클러터 환경 데이터를 형성한 후, 임펄스 응답 데이터를 삽입한다. 형성된 응답 데이터는 영상품질의 정확도를 향상시키고자 확장보간법을 도입하여 분석하고, 이에 대한 효과를 주요 도플러 파라미터인 방위 FM율 오차에 따른 성능분석을 수행함으로써 확인한다. A synthetic aperture radar (SAR) system is of great interest in many fields of civil and military applications because of all-weather and luminance free imaging capability. SAR image quality parameters such as spatial resolution, peak to sidelobe ratio (PSLR), and integrated sidelobe ratio (ISLR) can be normally estimated by modeling of impulse response function (IRF) which is obtained from various system design parameters such as altitude, operational frequency, PRF, etc. In modeling of IRF, however, background clutter environment surrounding the IRF is generally neglected. In this paper, analysis method for SAR mage quality is proposed in the real background clutter environment. First of all, SAR raw data of a point scatterer is generated based on various system parameters. Secondly, the generated raw data can be focused to ideal TRF by range Doppler algorithm (RDA). Finally, background clutter obtained from image of currently operating SAR system is applied to IRF. In addition, image quality is precisely analyzed by zooming and interpolation method for effective extraction of IRF, and then the effect of proposed methodology is presented with several simulation results under the assumption of estimation error of Doppler rate.
계층화분석(AHP) 기법을 통한 지자체 중소기업지원 포털사이트 평가모형 분석 : D기관 사례를 중심으로
정철호(Jung, Chul-Ho),이창조(Lee, Chang-Jo) 한국전자상거래학회 2010 전자상거래학회지 Vol.11 No.3
본 연구에서는 계층화분석(AHP) 기법을 활용하여 최근 지자체 별로 구축되어 운영중인 중소기업지원 포털사이트의 평가를 통해 중점을 두고 관리해야 할 요소를 구체화시켜 보고자 하였다. 이러한 연구목적을 효과적으로 달성하기 위하여 D시에서 현재 운영 중인 중소기업지원 포털사이트를 대상으로 우선순위 평가모델의 수립 및 전문가들을 대상으로 한 자료의 수집을 통해 다양한 영역별 우선순위 평가를 시도하였다. 이를 통해 중소기업지원 포털사이트의 개선방안 및 향후 타 지자체에서 유사 시스템 구축.운영 시 활용 가능한 유의미한 시사점을 도출하였다. SMEs are the main agents of economic activity which leads the regional economy by an absolute majority. For the steady economic growth, strengthening their competitiveness is the key factor for our continuous economic growth. Recently, as the rapid growth of information technology, the changes of providing websites for customers in the local government are observed - the main stream of this is the maximizing supportiveness by offering integrated information and service through the online portal site. In this paper, AHP(Analytic Hierarchy Process) was used to materialize what we should focus on and care about by evaluating SMEs supporting portal sites which is constructed in local governments. To achieve the main theme of the paper effectively, we made an attempt to evaluate the priority of domains by collecting data from experts and building an evaluating model of SMEs supporting portal site of D city. Our main concern is drawing meaningful implications which are useful to build and operate systems for other local governments and showing improvement for SMEs supporting systems.