http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
응집·침전공정에서 무기고분자응집제를 이용한 미세조류의 제거
정정조(Cheong Jo Cheong) 大韓環境工學會 2008 대한환경공학회지 Vol.30 No.1
정수 처리공정의 응집·침전공정에서 무기고분자응집제를 이용한 미세조류의 제거 가능성을 파악하기 위해서 응집제의 종류(Alum, PAC)와 응집영향인자(알칼리도, 응집제 주입량, 침전시간)에 따른 미세조류의 제거율과 미세조류의 크기(micro-, nano-, picoplankton)별 제거율과 주입된 응집제가 미세조류의 제거에 미치는 기여율을 평가하였다. 알칼리도의 주입량에 따른 조류의 제거율은 Alum의 경우 알칼리도가 25 mg/L의 조건에서 87.2%, PAC의 경우 알칼리도가 30 mg/L의 조건에서 90.1%로 가장 높은 제거율을 나타내었다. 조류의 제거율이 가장 높은 응집제 주입량은 Alum의 경우 40 mg/L로 제거율이 88.1%이었고, PAC의 경우는 주입량이 50 mg/L에서 제거율이 89.0%로 가장 높은 제거율을 나타내었다. 그리고 조류의 제거에는 PAC보다는 Alum이 다소 유리하다는 것을 알 수 있었다. 응집제가 주입되었을 경우 주입되지 않은 조건에 비해서 조류의 제거율이 약 2배 정도 증가하는 것을 알 수 있었다. 최적조건 하에서 조류의 제거율은 nanoplankton>microplankton>picoplankton의 순으로 나타났으며, 특히 picoplankton의 제거율은 약 30% 미만으로 제거율이 매우 낮은 것을 알 수 있었다. The purpose of this study is to understand the removal possibility of microalgae using inorganic coagulants in coagulation and sedimentation process for water treatment. Removal of microalgae was studied according to coagulant type(Alum and PAC), coagulation factors(alkalinity, coagulant dosage, and setting time), and size fraction of microalgae. The contribution of applied coagulants for removal of microalgae was also examined. The removal rate of the microalgae by change of alkalinity was most high in 25 mg/L of alkalinity(Alum) as 87.2% and 30 mg/L of that(PAC) as 90.1%. Optimal coagulant dosage to remove the microalgae was 40 mg/L(removal effi.; 88.1%), and PAC was 50 mg/L(removal effi.; 90.1%). Alum was better than the PAC to remove the microlgae. In the water treatment processes such as rapid·slow mixing and sedimentation the removal efficiency of microalgae with coagulants was 2 times higher than that of without. In optimal condition, the removal efficiencies of microalgae were nanoplankton>microplankton>picoplankton. Especially, the removal efficiency of the picoplankton was very low as below 30%.
정정조 ( Cheong-jo Cheong ),한상호 ( Sang-ho Han ) 한국환경기술학회 2015 한국환경기술학회지 Vol.16 No.1
본 연구에서는 광양제철소의 부산물인 제강슬래그를 투수콘크리트용 굵은 골재로 사용한 친환경콘크리트의 개발을 위하여 제강슬래그 골재의 물리적 성질을 평가하였으며, 제강슬래그 및 친환경콘크리트의 유해성을 분석하여 한국공업기준과 비교하였다. 또한 친환경콘크리트의 공극률과 투수계수, 그리고 강도를 측정하여 두 가지 투수콘크리트의 규정 및 부순돌을 사용한 투수콘크리트와 비교하였다. 그 결과 제강슬래그는 한국산업규격의 콘크리트용 골재에 상응하였으며, 제강슬래그 및 친환경콘크리트에 대한 유해성은 기준치 이하로 안전하였다. 또한 친환경콘크리트의 투수계수는 두 가지 규정을 모두 만족하였지만, 공극률은 한국환경산업기술원의 식생포장재 및 성형제품의 인증 기준에는 도달하지 못하였다. 그리고 친환경콘크리트의 압축강도는 두 가지 규정을 모두 만족하였지만, 인장 및 휨강도는 부순돌을 사용한 투수콘크리트에 비해 취약함을 확인하였다. In order to develop of the environmentally friendly concrete(EFC) using steel slag of Gwangyang steelworks as coarse aggregate, physical properties of steel slag aggregate were estimated. The leached harmful substances from steel slag and EFC were compared with those of Korean Standard(KS). Also porosity, coefficient of permeability, and strength of FEC were measured and compared with those of 2 kinds of codes and porous concrete using crushed stone. As the results, the steel slag corresponded with concrete aggregate of Korea Industrial Standard. Harmful substances of steel slag and EFC were safe less than those of KS. Although coefficient of permeability of EFC was contented with 2 kinds of codes, porosity didn`t attain certification criteria of vegetation pavement materials of Korea Environmental Industry & Technology Institute. Even though the compressive strength of EFC reached 2 kinds of codes, the results of tensile and flexural strength were confirmed that they were more vulnerable than the porous concrete using the crushed stone.