http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정재구(Jae-Goo Jeong),신재인(Jae-In Sin),이강수(Gang-Soo Lee) 한국멀티미디어학회 2009 한국멀티미디어학회 학술발표논문집 Vol.2009 No.1
현재 각 국내외 선진국들은 정보시스템에 대한 안전성과 보안성을 확보하기 위하여, 각 국의 정보시스템의 환경에 따라 정보보호 제품 및 시스템 등을 보증하기 위한 여러 정보보증제도를 시행하고 있다. 이러한 정보보증제도들은 정보 제품 및 시스템의 활용으로 인하여 발생되는 역기능에 대해 보호하고 이를 사용하는 사용자에게 신뢰성을 제공하기 위하여 시행하고 있다. 본 논문은 영국의 정보시스템에 대한 정보보증제도에 대하여 살펴본다.
ISO/IEC TR 79791에 기반한 운용시스템 평가 프레임워크
정재구(Jae-Goo Jeong),고갑승(Kab-Seung Kou),허승용(Seung-Yong Hur),이강수(Gang-Soo Lee) 한국멀티미디어학회 2008 한국멀티미디어학회 학술발표논문집 Vol.2008 No.1
현재 보안성 평가는 IT 제품의 보안평가를 위한 ‘CC(Common Criteria)’제도가 있으며, 실제 운영되고 있는 시스템의 보안 관리 평가를 위한 ‘ISMS(Information Security Management System)’를 제도를 시행하고 있다. 또한, 암호 모듈의 평가를 위한 ‘CMVP(Cryptographic Module Validation Program)’제도를 운영하고 있다. 그러나 이러한 보안제도들은 평가 대상이 단일 제품이나, 기존 시스템의 보안 관리에 대하여 초점이 맞춰져 있기 때문에, 향후 운용시스템 평가에 적용하기에 문제가 있다. 본 논문은 국내에 적합한 운용시스템 보안성 평가를 위한 ‘ISO/IEC TR 19791’음 기반으로 하는 체계를 제안한다.
운영시스템 평가 체계 분석 (ISO/IEC WD 19791)
정재구(Jae-Goo Jeong),허승용(Seung-yong Hur),이강수(Gang-Soo Lee) 한국멀티미디어학회 2008 한국멀티미디어학회 학술발표논문집 Vol.2008 No.2
현재 선진 각 국에서는 정보보호 제품 및 시스템에 내한 평가ㆍ인증을 수행하기 위하여 공동평가 기준(Common Criteria, CC) 체계를 시행하고 있으며, CC 평가체계는 정보보호 제품 및 시스템에 대한 평가 기준이다. 그러나 일본에서는 현재의 CC 평가체계의 단일 정보보호제품의 평가 한계를 인지하여, 운영시스템에 대한 평가 지침인 ISO/IEC 19791이란 평가 기준을 개발하였다. 본 논문에서는 CC v3.1의 변화에 따라 금년 5월에 개정된 ISO/IEC WD 19791올 분석하였으며, 향후 국내의 정보보호 평가 및 인증 체계를 보완한 한국운영시스템평가체계(Korea Operational Security System Evaluation Scheme, KOSSES)란 운영시스템 평가 체계를 개발하였다.
정재구(Jae-Goo Jeong),신재인(Jae-In Sin),이강수(Gang-Soo Lee) 한국멀티미디어학회 2009 한국멀티미디어학회 학술발표논문집 Vol.2009 No.2
선진 각국에서는 정보 시스템의 발전에 따라 안전한 정보 보호를 위한 암호모듈에 대한 ‘암호모듈 검증 제도 (Cryptographic Module Validation Program, CMVP)’를 시행하고 있으며, 국내에서도 이와 유사한 ‘암호검증 제도(Korea Cryptographic Module Validation Program, KCMVP)’를 시행하고 있다. 그러나 최근 소프트웨어 및 하드웨어의 형상으로 구현된 보안제품에 내재된 암호 알고리즘이 이론적으로 안전하더라도 실제 구현된 환경에 따르는 부 채널 공격에 대한 취약성이 발견되고 있으며, 이에 따른 평가기술이 부족한 실정이다. 본 논문에서는 부 채널 공격에 대한 취약성을 조사하였으며, 이에 따른 평가 도구 및 평가 기술을 분석하고자 한다.
암호모듈 검증을 위한 UML 2.0 상태도 기반의 유한상태모델 명세 및 분석
이강수(Gang-soo Lee),정재구(Jae-Goo Jeong),고갑승(Kab-seung Kou) 한국정보보호학회 2009 정보보호학회논문지 Vol.19 No.4
암호알고리즘 및 암호함수를 하드웨어적 또는 소프트웨어적으로 구현한 암호모듈을 암호모듈검증체계(Cryptographic Module Validation Program, CMVP) 내에서 시험(또는 인증, 검증)을 받기 위해서는 암호모듈에 대한 유한상태모델(Finite State Model, FSM)이 개발되고 제공되어야한다. 그러나 FSM을 체계적으로 모델링하고 분석하는 지침은 개발자와 시험자의 경험이므로 잘 알려져 있지 않다. 본 연구에서는 CMVP내에서 암호모듈의 검증을 위해 요구되는 FSM의 모델링, 분석지침, 천이시험경로 생성알고리즘을 제시하고 모델링도구인 CM-Statecharter를 개발하였다. FSM은 UML 2.0의 상태도를 이용해 모델링한다. 상태도는 FSM의 부족한 점을 보완하고 암호모듈의 FSM을 정형적이고 쉽게 명세할 수 있는 모델이다. A cryptographic module (CM) is an implementation of various cryptographic algorithms and functions by means of hardware or software. When a CM is validated or certified under the CM validation program(CMVP), a finite state model(FSM) of the CM should be developed and provided. However, guides or methods of modeling and analysis of a FSM is not well-known, because the guide is occasionally regarded as a proprietary know-how by developers as well as verifiers of the CM. In this paper, we propose a set of guides on modeling and analysis of a FSM, which is needed for validation of a CM under CMVP, and a transition test path generation algorithm, as well as implement a simple modeling tool (CM-Statecharter). A FSM of a CM is modeled by using the Statechart of UML 2.0. Statechart, overcoming weakness of a FSM, is a formal and easy specification model for finite state modeling of a CM.
이경용(Kyoung-Yong Lee),최영석(Young-Seok Choi),정재구(Jae-Goo Jeong),김정환(Jeong-Hwan Kim) 한국유체기계학회 2008 유체기계 연구개발 발표회 논문집 Vol.2008 No.-
In this study, a sirocco fan was designed by traditional design method, DOE (design of experiments) and CFD. Several design parameters, such as blade angle, volute width, volute expansion angle, impeller meridional shape, impeller width, etc, were set up. The measured performance curve of the basic design model was compared with predicted results for the validation of numerical models. To change the slope of the fan performance curve, volute expansion angle, tongue angle and expansion angle of the volute discharge part were selected as design variables. As a result, the final design model gives a lower maximum discharge flow rate as compared to the basic model. The steep characteristic of the performance curve is favorable for the design of motors in the constant air volume fan.
강경준(Kyung Jun Kang),신유환(You Hwan Shin),김광호(Kwang Ho Kim),이윤표(Yoon Pyo Lee),정재구(Jae Goo Jeong),김정환(Jeong Hwan Kim) 한국유체기계학회 2009 유체기계 연구개발 발표회 논문집 Vol.2009 No.-
This study investigated on details of flow characteristics of a multi-blade fan for domestic ventilation. Experiments and analysis were carried out to describe on flow pattern with variations of cut-off angle near the scroll- housing throat, which were performed by PIV measurement for the flow field and by total pressure probes. The stagnation point at cut-off region of the fan moves to the exit of the scroll housing as cut-off angle increases. The movement of stagnation point and the variation of throat area of the scroll housing influence to the distribution of velocity magnitude at the exit of the fan. Furthermore, a large distortion of the velocity distribution at the scroll exit causes to increase mixing loss along the flow path. The improvement of the fan design on cut-off is expected through understanding the flow pattern.
박준건(Jun Geon Park),강경준(Kyung Jun Kang),신유환(You Hwan Shin),김광호(Kwang Ho Kim),이윤표(Yoon Pyo Lee),정재구(Jae Goo Jeong),김정환(Jeong Hwan Kim) 한국유체기계학회 2009 유체기계 연구개발 발표회 논문집 Vol.2009 No.-
This study is processing for development of centrifugal multi-blade fan used in ventilation. The procedure is divided into three parts. The first is the aerodynamic design of centrifugal multi-blade fan matched with desired operating condition. The second is the performance test. The third is the three-dimensional flow analysis through CFD. This all processing is iterated to optimize the objective of design. The objective and constraint are constant air volume (120 CMH), pressure (25~300 ㎩) and rotational speed (1000~2500 RPM), respectively. The designed fan is fairly matched with results of flow analysis through CFD.