RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        톱날의 왕복 동작에 의한 뼈의 불완전 절단 흔적 특성분석

        정소운,윤영욱,한요한,최미정 한국과학수사학회 2022 과학수사학회지 Vol.16 No.4

        본 연구는 흉악범죄에 희생된 인체의 뼈에 남겨진 불완전 절단 흔적(false starts)으로 공구추정을 하기 위한 과학수사학적인 시도의 일환으로 진행되었다. 국내에서는 연구가 시도된 바가 없으나 국외의 경우에는 뼈에 남겨진 절단 흔적에 관한 다양한 연구자료가 존재하고 이를 통하여 범행에 사용된 공구 추정을시도하고 있다. 여기에서는 체계적인 이해를 위하여 뼈와 절단 흔적에 관련된 국외 자료의 전문 용어와 분석 요소를 정리 및 분류하였으며 톱날에 따른 뼈의 손상 특성을 파악하고자 5종류의 톱과 1종류의 칼을이용하여 뼈에 남겨진 불완전 절단 흔적을 분석하였다. 뼈 손상의 형태적 특징은 톱니 설정, 톱니 형태, 절단 원리 3가지 요소에 영향을 받으며, 기계적 동력을 이용하는 톱의 경우, 파편 이탈과 골절이 나타났다. 칼의 경우에는 절단 흔적 벽의 좌측 측면에 융기가 형성되어 톱과 구별되는 특징을 보였으며 불완전 절단흔적의 너비는 톱날 두께에 비례하여 너비가 증가하였다. 뼈의 불완전 절단 흔적은 톱니 설정 및 형태, 절단 원리, 동력, 공구의 종류, 톱날 두께 등 다양한 요소에 의해 차이가 나타날 수 있음을 확인하였다.

      • KCI등재

        한국판 삼킴 곤란 척도(K-SDQ)의 번안본 검증

        정소운,김정완 한국장애인재활협회 부설 재활연구소 2018 재활복지 Vol.22 No.4

        영양 섭취와 일상생활 삶의 질에 영향을 미치는 삼킴장애는 신경장애 환자뿐만 아니라 정상 노년층에게서도 적지 않게 나타난다. 본 연구에서는 노인의 삼킴 문제를 조기 선별하여 진단 검사로 연결될 수 있도록 도움을 주기 위한 기초연구로서, 주관적 삼킴장애 평가도구인 삼킴곤란척도(Swallowing Disturbance Questionnaire, SDQ)를 한국인의 정서와 문화에 맞게 번안하여 신뢰도와 타당도를 검증하고, 뇌졸중 환자 105명을 대상으로 하여 그 유용성을 검증하였다. 연구 결과, 한국판 SDQ의 문항내적일관성 신뢰도는 .601, 검사-재검사 신뢰도는 .97, 공인타당도는 .956이었고, 절단점 8점을 기준으로민감도가 46.8%, 특이도가 81.6%인 것으로 나타났다. 객관적 삼킴장애 검사인 비디오투시조영검사와한국판 SDQ 검사 상 관찰된 삼킴곤란 유무와의 비교 결과, 음성예측도(negative predictive value, NPV) 는 81%, 양성예측도(positive predictive value, PPV)는 53%로 나타났다. 한국판 SDQ는 뇌졸중 환자들의삼킴장애 유무를 변별하는데 유용한 검사도구로 활용될 수 있을 것으로 기대되며, 재활전문가에 의한임상평가가 이루어지기 전에 대상자가 보이는 삼킴곤란을 미리 선별하여 진단검사를 의뢰하거나, 삼킴문제가 없는 뇌졸중 환자를 정확하게 선별하여 잉여적인 추가 검사 노출을 배제하는 차원에서 그임상적 의의가 크다고 볼 수 있다. Swallowing disorders that can affect nutrient intakes and quality of life are commonly shown among the elderly as well as patients with neurogenic disorder. This study verifies the reliability and validity of the Swallowing Disturbance Questionnaire (SDQ), a subjective swallowing disability assessment tool, modified for Koreans' eating habit and cultural sentiment, against 105 stroke patients, in order to help identify early swallowing problems of the elderly. Reliability of internal consistency in the Korean version of SDQ is .601, test-retest reliability is .97, and concurrent validity is .956. Based on 8 points of cut-off score, 46.8% of sensitivity and 81.6% of specificity. Comparing the results of video fluoroscopic study (VFSS), an objective swallowing disorder test with those of Korean version of SDQ, negative predictive value (NPV) and positive predictive value (PPV) was shown as 81% and 53%. The Korean version of SDQ is expected to be a useful testing tool to discriminate swallowing disorders in stroke patients. It has great clinical significance in that swallowing difficulties shown by subjects can be sorted out to request a diagnostic assessment before clinical evaluation by a rehabilitation therapist or ruling out unnecessary exposure to additional tests by accurately identifying stroke patients without swallowing problems.

      • KCI등재

        스퍼터 증착으로 형성된 AlTiO 선택적 투과막의 표면 균질성에 따른 광학적 특성

        정소운,임정욱,이승윤,Jeong, So-Un,Lim, Jung-Wook,Lee, Seung-Yun 한국진공학회 2012 Applied Science and Convergence Technology Vol.21 No.1

        건물일체형 태양전지는 투명 연료감응형 태양전지 기술을 중심으로 연구개발이 진행되고 있다. 신뢰성-수율 개선 및 대면적화의 필요성 때문에 잘 정립된 박막 공정 기술에 기초하는 Si계 박막 태양전지가 건물일체형 태양전지를 구현할 기술로서 새롭게 조명 받고 있다. Si계 박막 태양전지에 선택적 투과막을 적용하면 가시광선은 태양전지를 투과하고 적외선은 광흡수층으로 반사되기 때문에 투명 태양전지의 변환효율이 향상된다. 본 연구에서는 선택적 투과막의 증착 기술로서 생산성 측면에서 유리한 스퍼터 증착을 이용하여 AlTiO 선택적 투과막을 형성하고 증착 조건을 조절하여 투과율을 향상시켰다. Transparent dye-sensitized solar cells have been widely investigated for the application to building integrated photovoltaic system. Thin film Si-based solar cells are emerging as a substitute for the dye-sensitized solar cells because their merits of well-established manufacturing processes. Since the selective transmitting layer transmits visible light and reflects infrared light, the solar cell efficiency increases with the introduction of the selective transmitting layer. In this work, AlTiO thin films were grown as the selective transmitting layer by cost-effective sputter deposition and their transmittances were improved by controlling deposition parameters.

      • KCI등재

        Al-Ti계 산화물 박막의 조성에 따른 선택적 투과 특성

        방기수,정소운,임정욱,이승윤,Bang, Ki Su,Jeong, So Un,Lim, Jung Wook,Lee, Seung-Yun 한국진공학회 2013 Applied Science and Convergence Technology Vol.22 No.1

        It is expected that progress in building-integrated photovoltaic (BIPV) systems, improving the functionality and design of buildings, will be accelerated in the coming years. While the dye sensitized solar cell is considered one of the most important technologies in the BIPV field, the transparent silicon based thin film solar cell fabricated by thin film processes has drawn attention as a novel alternative. When the selective transmitting layer is applied to the solar cell, the conversion efficiency is improved due to the re-reflection of infrared light into an absorber layer with the transmission of visible light through the solar cell. In this work, we prepared Al-Ti based oxide thin films using cost-effective sputter deposition and examined their selective transmitting characteristics with various compositions. The transmittance and reflectance of the Al-Ti based oxide thin film changed with the variation of its composition, and the selective transmitting property was observed in the sample with the 25 nm-thick AlTiO layer. It is considered that the realization of transparent solar cells and the improvement of their conversion efficiency can be achieved by introducing the Al-Ti based selective transmitting layer. 건물기능과 디자인을 개선하는 건물일체형 태양전지의 발전 가능성이 높게 평가되고 있다. 현재는 투명 염료감응형 태양전지가 유력한 건물일체형 태양전지 기술로서 개발되고 있는데 박막 공정 기술에 기초하는 Si계 투명 박막 태양전지가 새로운 대안으로서 조명받고 있다. Si계 투명 박막 태양전지에 선택적 투과막을 적용하면 가시광선은 태양전지를 투과하고 적외선은 광 흡수층으로 재반사되기 때문에 변환효율이 향상된다. 본 연구에서는 여러 종류의 박막 증착 기술 중에서 경제성이 높은 스퍼터링 방식을 이용하여 Al-Ti계 산화물 박막을 형성하고 조성에 따른 선택적 투과 특성 변화를 관찰하였다. Al-Ti계 산화물 박막의 투과율 및 반사율은 조성에 따라 크게 변화하였으며 25 nm 두께의 AlTiO 박막에서 선택적 투과 특성이 관찰되었다. 이러한 Al-Ti계 산화물 박막의 광학적 특성을 Si계 박막 태양전지에 응용하면 투명 태양전지 구현 및 변환효율 향상이 가능해 지리라 판단된다.

      • KCI등재

        Synovitis, Acne, Pustulosis, Hyperostosis, and Osteitis Syndrome: A Case of Spine, Pelvis, and Anterior Chest Wall Involvement, with Overlooked Plantar Pustulosis

        김현수,정소,이수진,백인,박정미 대한영상의학회 2017 대한영상의학회지 Vol.76 No.5

        Synovitis, acne, pustulosis, hyperostosis, and osteitis (SAPHO) syndrome is an inflammatory clinical condition with aseptic bone lesions and characteristic skin manifestations. A 63-year-old woman presented with vague musculoskeletal symptoms including chronic buttock pain. The clinical work-up revealed multiple spine and osteoarticular involvement. Multilevel bone marrow edema and cortical erosions involving the spine, asymmetric sacroiliitis, and osteosclerosis of the sternoclavicular joint were consistent with a diagnosis of SAPHO syndrome. Considering SAPHO syndrome in the differential diagnosis, subsequent skin inspection revealed plantar pustulosis. Despite the unique feature of accompanying skin and skeletal lesions, skin lesions could be overlooked if not suspected.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼