전(塼)의 백화현상 규명 및 제거방안 연구 - 수원화성 백화현상을 중심으로 -

정광용,차현석,Chung, Kwang-Yong,Cha, Hyun-Seok 한국건축역사학회 2013 건축역사연구 Vol.22 No.6

This study progressed an investigation on the cause of the efflorescence phenomenon of bricks in Suwon Hwaseong Fortress, which is designated as a UNESCO World Heritage by using diverse scientific analyses. The samples were taken in Hwaseong and analyzed using XRD and SEM-EDS for the material identification of efflorescence. We observed under a polarizing microscope and measured absorption factors for the basic investigation for traditional bricks. As a result of material identification, soluble salt($Na_2SO_4$, $KNO_3$) and insoluble salt($CaCO_3$) were detected. There was no big difference between original bricks and repaired bricks under the polarizing microscope. However, in terms of the water absorption rate, bricks which were used for repair nowadays showed low water absorption rate(1%). In conclusion, soluble salt and insoluble salt appeared due to an effect of an air pollution and joint mortar. Soluble salt was removed in the rainy season, but insoluble salt was not removed. As a result of the efficiency and safety tests for chemicals removing efflorescence, chemical E is likely to be the suitable chemicals for the efflorescence phenomenon of traditional bricks in Suwon Hwaseong Fortress. In the future, consideration whether the use of lime is available or not should be studied through comprehensive researches including repair work, construction work and the environment factor with lime. Also, physical, chemical identifications of repairing bricks will be required.

숭례문 기와의 물리적 특성 연구

정광용,Chung, Kwang-Yong 한국건축역사학회 2011 건축역사연구 Vol.20 No.1

The Sungnyemun roofing tiles were twice disassembled for maintenance work, in 1963 and 1997, and modern tiles were applied in 1997. However, besides differing in visual appearance, the modern tiles had distinctly different physical properties. A study has been carried out on 22 different tiles, including original Sungnyemun tiles, modern tiles applied during maintenance, traditional tiles made by tile-makers, and others, to examine their physical properties, such as bending strength, frost resistance, absorption, whole-rock magnetic susceptibility, chromaticity, differential thermal analysis, and other characteristics. Since the method of making modern tiles involves compressing clay in a vacuum, modern tiles showed relatively greater bending strength and specific gravity, while Sungnyemun tiles and those made by tile-makers, in comparison, demonstrated less bending strength and specific gravity owing to their production method of 'treading,' in which clay is mixed by having someone tread upon it repeatedly. Over time, the absorption rate of the original tile used for Sungyemun gradually decreased from 21% to 14.7%; traditional tiles from tile-makers showed absorption rates of 17%, while the absorption rate of modern tiles was just 1%, which is significantly low. As for frost resistance, Sungnyemun tiles and traditional tiles from tile-makers showed cracking and exfoliation after being subjected to testing 4 or 5 times, while slight cracking was seen on the surface for modern tiles after 1ngy, or 3 times. In other words, no significant difference from influence by frost was found. According to the results of differential thermal analysis, the plastic temperature was shown to have been no less than 1, $on^{\circ}C$ for all types of tile, and cristobalite was measuredthrough XRD analysis from a Sungnyemun female tile applied during maintenance in 1963, which appeared to have been plasticized at between $1,200^{\circ}C{\sim}1,300^{\circ}C$. Based on these research results on the physical properties of tiles from the Sungnyemun roof, a fundamental production method for tiles to be applied in the restoration of Sungnyemun has been identified.

백제시대 수촌리유적 출토 환두대도의 복원제작

정광용,이현상,Chung, Kwang-yong,Lee, Hyun-sang 국립문화재연구소 2006 保存科學硏究 Vol.27 No.-

The Suchon-ri tomb No. 1 is the earliest one among the Suchon-ri tombs excavated in 2003. The Suchon-ri tomb No. 1 yielded a number of valuable artifacts furnished with burial goods such as gilt bronze items of a crown, a pair of earrings and shoes and a loop-handled sword with inlaid silver decoration. In particular, a loop-handled sword drew scholarly attention in that it showed characteristics of Baekje such as wave patterns on a silver plate decorated in the handle and sheath and inlaid dragon design on the loop-handle. In the process of the reproducing the loop-handled sword, classification methods of the loop-handled swords, iconography decorated on the swords, unearthed loop-handled swords of the Three Kingdoms Period have been investigated along with studying the reproduction cases in Japan. In addition to the study focused on the shape of the swords, manufacturing techniques have been thoroughly analyzed through scientific methods. Finally, based on the synthesis of a series of studies and analyses, traditional manufacturing techniques employed by Baekje artisans had been inferred and a replica of the loop-handled sword was manufactured with the traditional methods.

서천 오석리유적 출토 토기복원

정광용,강태춘,임세진,Chung, Kwang-yong,Kang, Tae-chun,Lim, Se-jin 국립문화재연구소 2007 保存科學硏究 Vol.28 No.-

Restoration of earthenware is largely composed of selection of clay, making(forming), and firing. This study lays emphasis on the making method and open-air firing. For making methods, This study used coiling method partly with priority given to ring method. The most significant feature of this restoration work is the making method of tap-forming, in which 외박자(out tap instrument) and 내박자(inter tap instrument) would be tapped and formed. For firing, This study used open-air firing method in the most primitive way. This method needs no special device and equipment and makes the work more simple and easy. The previous study was on the making method by archeological and preservation-scientific research but this study emphasized the restoration work in an actual earthenware maker's position. Through the result of this study, This study wish this would be an opportunity to present another model of various restoration methods for other researchers those who wanted to participate in the restoration and openair firing.

남한산성 여장 손상원인 분석

정광용,이상옥,양희제,Chung, Kwang-Yong,Lee, Sang-Ok,Yang, Hee-Jae 한국건축역사학회 2016 건축역사연구 Vol.25 No.1

There are many reasons of damage in Namhansanseong Yeojang. Lots of damage types are observed in each Yeojang. There are many types of damage factors but major damage factor is breakage by freezing and thawing. So Conduct non-destructive evaluation about damage factors in Namhansanseong Yeojang to analysis weathering factors in Yeojang by measuring directional microclimate. The study will pave the way for conservation management in Namhansanseong by suggesting the conservation calendar about weather condition and damage factors.

삼국시대(三國時代) 철기유물(鐵器遺物)의 제작기술(製作技術) 연구(硏究)

정광용,Chung, Kwang-Yong 국립문화재연구원 2002 헤리티지:역사와 과학 Vol.35 No.-

To compare and analyze technical system related to manufacturing of ironware during the period of the Three Kingdoms, an analysis was conducted on the minute system of metalwork, as study objects, of the remains of the Mt. Wolpyeong fortress wall in Daejeon in the period of capital during the era of the Three Kingdoms in the 5th century, the Sanwol-ri remains in the 6th century in Gunsan and the remains of ironware excavated from the great ancient tomb of Hwangnam of the Silla dynasty in the 5th century. The result of analysis shows that in the most of the casting products, the minute system of white cast iron were contained. While the iron part of decarbonization was in the system by casting as white cast iron in the central part, on the surface layer it was turned out that comparatively uniform 100% pearlite system of about 1~2mm degree was existing. The part of pearlite on the surface layer was caused by decarbonization, which appears in all the parts of blade front end and handle. Therefore, it was found that the iron part of decarbonization was manufactured by casting, and then was processed at the high temperature by decarbonization. For the products of forging, after processing the products on the basis of pure iron for materials, they manufactured the ironware that raises the strength by carbonizing that keeps carbon infiltrated on the necessary part, by the method of black smith welding that add pure iron to steel, or by varying the method of heat processing onto the part required of strength. Though limited, we could understand that the technical systems for manufacturing skill of ironware in the areas of Baekje and Silla were different each other. In the technical system for Hwangnam great ancient tomb in the Silla area, it is found that they had raised the strength on the necessary part by applying the steelmaking method of carbonizing in the last stage of production of products, in the meantime in Baekje area, it appears that they had produced steel in advance in the first stage of production of the products, and used the produced steel only to the necessary part.

언남리유적 철제재갈의 제작기술

정광용,이수희,정희원,Chung, Kwang-Yong,Yi, Su-Hee,Seong, Hee-Won 국립문화재연구소 2005 保存科學硏究 Vol.26 No.-

A set of horse bit from the Eonnam-ri site consists of three parts, pyo , ham , andinsu , and each part takes a shape of a piece of bar. According to current typological study, the pyo is S type, the insu is two-braided line type, and the outer rim of the ham is double rim type, respectively. According to X-ray test, inlaid design seems to have been decorated on the whole surface of the iron bit, originally. However, inlaid pattern partially remained. While the part of bit stopper is designed with flame pattern, the part of rein joint is designed with cloud pattern. According to XRF and XGT analysis of inlaid material, the content of silver is not more than 50%. The line inlay method making grooves on the surface of iron, then in laying a silver thread into them, and grinding the surface in a direction was adoptedin the manufacture of the iron bit.

동대문운동장유적 출토 조선시대 기와의 특성 연구

정광용,Chung, Kwang-Yong 국립문화재연구원 2012 헤리티지:역사와 과학 Vol.45 No.3

본 연구는 동대문운동장에서 출토된 조선시대 기와의 선후관계, 유물제작기법 및 기술적 속성을 파악하기 위하여 기와의 물리적 화학적 특성 연구를 실시하였다. 기와의 물리적 특성 연구를 위해 흡수율, 비중, 전암대자율, 시차열분석을 실시하였으며, 화학적 특성 연구를 위해 중성자 방사화분석(NAA), 미세조직관찰, X-선 회절분석(XRD) 등을 실시하였다. 기와편 22점의 중성자방사화분석 및 통계분석결과 각각 기와시료는 다른 시대에 서로 다른 제작지에서 생산된 것으로 뚜렷하게 구분되었다. 또한 희토류원소의 출토지별 평균값을 비교해 보아도 각각 서로 다른 조성의 차이를 보이는데 이는 산지가 다른 점토광물을 이용하여 제작하였다는 것을 의미한다. XRD 및 편광현미경 관찰결과 기와의 주요 성분은 석영과 장석이었으며 부분적으로 운모와 일라이트(Illite)가 나타났다. XRD 분석결과 $1000^{\circ}C$의 부근에서 소성되었을 때 나타나는 뮬라이트(mullite)광물 조성이 나타났으며, 시차열분석에서는 $900^{\circ}C$ 부근에서 완만한 발열피크가 나타났다. 이를 토대로 기와의 소성온도를 추정한 결과, 기와는 $900{\sim}1000^{\circ}C$에서 소성이 이루어진 것으로 보인다. 전암대자율 평균값으로 비교분석하였을 때 출토지별 분류는 나타나지 않았지만 문양이 파상문, 태상문, 어골문, 격자문, 횡선문인 경우 0.2~0.78(${\times}103$ SI unit)의 낮은 전암 대자율이 나타나는 특징이 있다. 전체 흡수율은 대체적으로 14%~21% 범위를 보였으며 이는 조선시대 전통기와에서 나타나는 흡수율 14~18%와 유사한 범위를 보이고 있다. 기와시료의 비중은 대체적으로 1.4~2.5g/cm3의 범위를 보여 출토지에 따른 비중 차이가 나타나지 않았다. Roofing tile research conducted in Korea so far is mostly related to studies on roofing tile patterns excavation report on the roof tile klin site in the aspects of archeology architecture and history of art. There have been continuous studies on kiln ground and manufacture techniques of roofing tiles. However it is difficult to find roofing tiles research based on scientific experiments. The research on this paper performs physical and chemical experimental study to understand order, manufacturing techniques and other characteristics of Chosun Dynasty roofing tiles excavated in Dongdaemun stadium. As for physical experimental study water absorption, specific gravity, whole-rock Magnetic susceptibility rate and Differential Thermal Analysis are conducted. As for chemical experimental study, neutron activation analysis(NAA), microstructure observation, X-ray diffractometry(XRD) analysis are conducted. Result of neutron activation analysis and statistical analysis on piece of roof tile 22 samples clearly show that the roofing tile samples are from different time line and places. It also shows different composition when compare average value of rare earth resources per findspots. It means roofing tiles were manufactured from clay mineral from several places. Close inspection using XRD and polarization microscope reveals that main components of roofing tiles are quartz and felspar. Mica and Illite are found partially. XRD analysis shows mullite mineral composition which occurs when roofing tile is calcined around $1000^{\circ}C$. Differential thermal analysis shows gradual exothermic peak near $900^{\circ}C$. Based on these results, it is assumed that roofing tile is made at $900{\sim}1000^{\circ}C$. result of XRD analysis shows mullite were made near $1000^{\circ}C$. in Differential Thermal Analysis shows gradual exothermic peak near $900^{\circ}C$. this results shows that roof tiles were made near 900~1000 near $1000^{\circ}C$ mean value of whole-rock Magnetic susceptibility rate. When performed comparative analysis using whole-rock Magnetic susceptibility rate average value, findspots provided no certain classification to arrange. Nonetheless low whole-rock Magnetic susceptibility rate 0.2~0.78(${\times}103$ SI unit) is found when roofing tile patterns are Pasangmun, Taesangmun, Eosangmun, Kyukjamun, Heongsunmun. Overall absorptivity is 14~21%. It is similar to 14~18% of roofing tile from Chosun Dynasty. There is only 1.4~2.5g/cm3 of roof tile sample specific gravity. The analysis finds no difference in specific gravity by findspots.

부석사 조사당 벽화조사에 따른 적외선 T.V카메라 이용

정광용,Chung, Kwang-Yong 국립문화재연구소 1986 保存科學硏究 Vol.7 No.-

In the fields of the cultural properties, the Infrared TV camera is being initiated to use instead of the Infrared photo film fo a better means to detect the description of drawings of the paintings. Seeing from the effect of transillumination, the Infrared TV camera with its long wave of visible spectrum that makes less absorption by the pigments and with the reflection rays passing through the base of colour layers makes it able to findbase drawing and letters. The detection range of transillumination by the infrared rays depends on the kinds of pigments, lines of the base drawing and wave length of the infrared rays. In our country, it was the first time to detect by our Conservation Science Dep't of The Research Institute of Cultural Properties by means of using Infrared TV camera to determine the mural paintings on the Josadang, Busuk Temple, resulted in an epoch-making success, that we have come to know the painting technique methods, how to treat for its conservation and making replica, reproduction, etc.

오창 학소리유적 토광묘내 유리구슬의 화학적 특성 - 37호 및 40호 -

정광용,강형태,고민정,김화정,Chung, Kwang Yong,Kang, Hyung Tae,Koh, Min Jeong,Kim, Hwa Jung 국립문화재연구소 2011 保存科學硏究 Vol.32 No.-

오창 학소리I유적의 토광묘에서 유리구슬 시료 4점을 입수하고 각각 13종의 산화물을 분석하였다. 토광묘에서 출토된 유리구슬의 화학조성에 따른 유리 계통을 정리하였고 어떤 발색제가 기여하였는지를 확인하였으며 구슬을 제조하기 위한 원료의 대해서도 검토하였다. 토광묘에서 녹청색 유리 4점은 모두 $K_2O-CaOSiO_2$ 계통이며 동일한 농도범위이어서 같은 원료를 사용했을 것으로 판단되며, 이중 3점은 PbO 함량이 4% 이상으로서 포타쉬납유리 계통($K_2O-PbO-CaO-SiO_2$)으로 볼 수 있다. 유리의 녹청색은 Cu에 의한 것으로 생각되며 일부 철의 역할도 있었을 것이다. 납동위원소비 분포는 모두 흩어져있어 동일 지역에서 가져온 납을 사용했다고 볼 수 없다. Four glass beads from Hakso-ri site, O'chang were analyzed for thirteen oxides with SEM/EDS and lead isotope ratios with TIMS respectively. These samples were classified to potash glass system($K_2O-CaO-SiO_2$) with HCLA(High CaO, Low $Al_2O_3$). However three samples with above 4% for lead could be classified to potash-lead ($K_2O-PbO-CaO-SiO_2$)glass system and it seemed that coloring agent for greenish blue was Cu. Lead isotope ratio data for four samples did not make a group but scattered to the space respectively. It needs more study for compositions and lead iosotope data of potash-lead glasses with regions and ages.