http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
탄화수소계 냉매를 이용한 수냉식 히트점프의 성능특성에 관한 연구
전철호,이호생,김재돌,윤정인,Jun Chul-Ho,Lee Ho-Saeng,Kim Jae-Dol,Yoon Jung-ln 한국마린엔지니어링학회 2005 한국마린엔지니어링학회지 Vol.29 No.8
This study of the performance characteristics of natural refrigerants such as R-290 (propane), R-6OOa (iso-butane) and R-1270 (propylene) has investigated to compare with conventional HCFC's refrigerant R-22 for water-cooled heat pump system. The experimental apparatus has basic parts of cycle that uses the water as a heat source. The Performance of the water-cooled system using hydrocarbon refrigerants had been getting better than R-22 from start-up to the similar evaporating temperature after stabilizing system. Through the above it is possible that hydrocarbon refrigerants could be drop-in alternatives for R-22.
무선 애드혹 랜 환경에서의 채널 분리에 의한 채널 활용도 향상
전철호(Chul-Ho Jun),서영주(Young-Joo Suh),안성옥(Syungog An) 한국정보과학회 2001 정보과학회논문지 : 정보통신 Vol.28 No.1
In designing WLAN MAC protocols, several issues must be considered. Among them, the hidden-terminal and exposed-terminal problems are two of the most important issues. The hidden-terminal problem has been analyzed by many researchers and significant improvements have been made. The exposed-terminal problem, however, has not been fully considered in the design of WMAC protocols. In this paper, we propose two protocols. The first one splits an available channel into a control channel and a data channel and then uses control frames over the control channel. In the second protocol, control frames can be transmitted independently of data frames. The latter protocol reserves several transmissions while the first protocol reserves only one transmission. The proposed protocols are compared with existing protocols and show an improved performance. 무선 랜용 MAC 프로토콜을 설계함에 있어서, 몇 가지 고려되어야 할 사항들이 있다. 이들 중에서 hidden-terminal 문제와 exposed-terminal 문제는 반드시 고려되어야 할 문제들이다. Hiddenterminal 문제는 많은 사람들에 의해 연구되어 왔으며, 상당한 개선을 이루었으나, exposed-terminal 문제는 그리 중요하게 고려되지 않았다. 이 논문은 두 개의 프로토콜을 제안하였다. 첫 번째 프로토콜은 가용채널을 제어 채널과 데이타 채널로 나누어 이를 각각 제어 프레임과 데이타 프레임을 위해 사용하는 것이며, 두 번째 프로토콜은 채널을 분리할 경우 제어 프레임이 데이타 프레임과 완전히 독립적으로 전송될 수 있다는 것을 이용하는 프로토콜이다. 두 번째 프로토콜은 한 번의 프레임 전송을 예약하는 첫 번째 프로토콜과 달리 복수의 프레임 전송을 예약한다. 제안된 두 프로토콜은 시뮬레이션을 통해 검증되었으며, 기존의 프로토콜에 비해 향상된 성능을 보였다.
무선 LAN 용 RTS / CTS 대화형 MAC 프로토콜 상에서의 채널 분리에 의한 성능 향상
전철호(Chul-Ho Jun),서영주(Young-Joo Suh) 한국정보과학회 1999 한국정보과학회 학술발표논문집 Vol.26 No.1A
Wireless LAN MAC 프로토콜을 설계함에 있어서 hidden terminal 문제와 exposed terminal 문제는 프로토콜의 성능에 큰 영향을 끼친다. 이런 문제들을 해결하기 위해 RTS/CTS control frame을 이용한 방법이 제안 되었지만, 완벽하게 해결하지는 못하고 있다. 본 논문에서는 채널을 control 채널과 데이터 채널로 나누어 RTS/CTS control frame을 적용하였고, 이 방법에서 나타나는 문제를 해결하기 위해 RTS/ATR control frame을 사용하는 새로운 프로토콜을 제안하였다. 제안된 프로토콜의 성능은 시뮬레이션을 통해 검증하였고 개선된 결과를 얻었다.
물-에탄올 혼합물을 작동유체로 한 회전형 히트파이프의 전열 특성에 관한 연구
박춘근(Choon-Kun Park),전철호(Chul-Ho Jun),서해성(Hae-Sung Seo) 한국태양에너지학회 1991 한국태양에너지학회 논문집 Vol.11 No.1
내부에 삼각형 핀을 갖는 회전형 히트파이프의 작동유치를 물-에탄올 2성분 유체를 사용하였을 때 Nusselt의 막응축이론을 기초로 하여 핀 및 그루브의 전열특성을 유한요소법에 의한 수치해석을 하였으며 또한 실험을 행하여 비교하였다.<br/> 히트파이프의 회전수가 증가할수록, 내부 증기압이 높을수록 전열량은 완만하게 증가하지만 에탄올 농도가 커질수록 전열량은 감소하였다. 그리고 순수 에탄올만을 작동 유체로 하는 경우는 증류수만을 작동유체로 하는 경우의 전열량의 0.75~0.85정도로 나타났다. 또한 에탄올 농도가 0.2전후에서 전열효과 및 작동온도 범위 등이 가장 유리하게 나타났다. Heat transfer characteristics of a rotating heat pipe have been studied numerically and experimentally with using water-ethanol mixture as working fluid. And triangular fins are attached inside the rotating heat pipe.<br/> Experimental results generally agreed with numerical results.<br/> According to increasing rpm and vapour pressure of the rotating heat pipe, the heat transfer rate increased. And also according to decreasing the concentration of ethanol, the heat transfer rate increased.<br/> In the case of using the pure ethanol as working fluid, the heat transfer rate was about 80% of using distilled water.<br/> The heat transfer rate and operating temperature difference of the rotating heat pipe was much influenced by ethanol concentration, and the optimum ethanol concentration was 0.2.
G.F.R.P체소시(切素時) 공구마모(工具摩耗)에 관한 연구(硏究)
전태옥 ( Tae Ok Jun ),전철호 ( Chul Ho Jun ),주원식 ( Won Sik Ju ) 東亞大學校附設 石堂傳統文化硏究院 1980 石堂論叢 Vol.4 No.-
G.F.R.P. is widely used in the industry as materials of parts of various precesion instruments because of excellent mechanical properties, water proof, endurance of drugs, corrosion resisting, heat insulation and separation. Therefore it is recently demanded the necessary of cutting work as well as forming in the extreme, but the tool wear greatly occurs in cutting of G.F.R.P. and it is depended upon the cutting conditions; cutting speed, cutting distance and too angle. This study has analysised and examined the tool wear measured by the model formular of tool wear and experiments. The main results obtained are as follows. 1. Approximate wear value of the model formular of tool wear almost approaches to value measured by experiments. 2. The edge wear is varied with the direction of Glass Fiber. 3. The wear of cutting edge is nearly increased proportion to the cutting distance.