http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
단순지지 거더교의 실측 변형률 응답을 이용한 변위 추정 방법
전준창,이희현 한국구조물진단유지관리공학회 2016 한국구조물진단유지관리공학회 논문집 Vol.20 No.3
This study presents a simple method which can estimate displacement using measured strain response of simply supported girder bridges. The basic concept of the present method is derived from a relation between displacement and strain, and is generalized by introducing analytical tool. Static and dynamic laboratory test are conducted on simply supported plate which is designed to respond dynamically similar to actual bridges to experimentally verify the present method, and displacement and strain are measured at the midpoint of specimen. Displacement estimated by using measured strain is well agreed with measured one. This study demonstrates that the present method is suitable for estimating displacement of real simply supported bridge, in which the installation of a displacement transducer at the fixed reference point is difficult. 본 연구에서는 기존의 가속도 등을 이용하여 변위를 추정하는 방법의 문제점을 개선시키기 위해 단순지지 거더교의 실측 변형률로부터 변위를 추정할 수 있는 간단한 방법을 제안하였다. 제안된 변위 추정 방법의 기본 개념은 변위와 변형률의 관계로부터 유도되었으며, 해석적 방법을 부가적으로 도입하여 일반화시켰다. 실교량과 유사한 동적 거동특성을 갖는 단순지지 강판에 대한 정․동적 실내실험을 수행하였으며, 실험을 통해 실험체 중앙점의 변위 및 변형률을 측정하였다. 실험체에 대한 실측 변형률을 이용하여 추정된 변위는 실측 변위와 잘 일치하는 것으로 나타났다. 본 연구에서 제안한 변위 추정 방법은 변위계 설치를 위한 고정된 기준점 확보가 곤란한 실교량(단순지지 거더교)의 변위 측정에 적합하다고 판단된다.
고속도로 교량의 상태 분석에 근거한 점검 활동 개선에 관한 연구
전준창,이일근,박창호,이희현 대한토목학회 2017 대한토목학회논문집 Vol.37 No.1
In this paper, detailed safety inspection reports on the 915 expressway bridges which had been published from 1996 to 2010 are collected and condition of these bridges are analyzed. Damages are categorized into 'damage by defect', 'damage by physical force', and 'damage by deterioration' and the concept of damage possession rate is introduced to investigate the occurrence time and the characteristics of damages. Based on the top 10 damage patterns of expressway bridges and the deterioration characteristics of heavy snow and freezing cold area, reasonable improvement direction of inspection activity is suggested. From this study, it is known that improvement of inspection regularization during construction or at completion stage of bridges is needed. Since the deterioration progress of the heavy snow and freezing cold area is faster than that of general area, environmental characteristics should be considered in inspection activity. The results of present study can be widely used for improvement of inspection activity of expressway bridges. 이 논문에서는, 1996년부터 2010년까지 915개 고속도로 교량에 대해 실시된 정밀안전진단 보고서를 수집하여 이들 교량의 상태를 분석하였다. 분석시 손상을, 결함, 물리력 및 열화에 의한 손상으로 구분하여 손상이 많이 발생하는 시기를 조사하고, 유손상율의 개념을 도입하여 손상의 특징을 조사하였으며, 고속도로 교량의 10대 손상, 다설한랭지역 교량과 일반지역 교량의 열화특성을 비교하여 합리적인 점검활동 개선 방향을 제시하였다. 연구결과, 시공시 실시하는 점검 또는 초기점검 제도 개선이 필요하고, 다설한랭지역의 경우 열화진행 속도가 빠르므로 주변 환경의 특성을 고려한 점검 활동 개선이 필요한 것으로 판단되었다. 이 연구 결과는 향후 고속도로 교량의 점검 활동 개선을 위해 널리 활용될 수 있을 것이다.
전준창,김석태,경갑수,이희현,Jeon, Jun Chang,Kim, Seok Tae,Kyung, Kab Soo,Lee, Hee Hyun 한국강구조학회 2002 韓國鋼構造學會 論文集 Vol.10 No.3
본 연구는 중소규모의 일반 강교량에 대한 고강도 강재의 적용성을 수치해석적으로 검토하기 위해 수행되었다. 강재의 항복강도, 일평균 트럭교통량 및 구조상세의 피로등급을 해석변수로 하여 AASHTO LRFD 설계기준의 한계상태를 만족하는 최소중량단면을 최적화 기법을 적용하여 산정하고 그 결과에 대해 고찰하였다. 또한, 교량의 거더 개수 및 경간길이의 변화가 고강도 강재의 적용성에 미치는 영향에 대해서도 검토하였다. 검토결과, 피로의 영향을 무시할 경우 강재의 항복강도 증가와 함께 강재중량이 감소하는 경향을 나타내어 강교량에 대한 고강도 강재의 적용 가능성을 확인하였으나, 고강도 강재를 보다 효율적으로 활용하기 위해서는 가장 지배적인 영향인자인 피로문제에 대한 적절한 대처가 필요함을 알 수 있었다. Numerical analyses have been carried out in order to check the applicability of high-strength steel to a medium-sized steel bridge. Using the yield strength of steel, Average Daily Truck Traffic (ADTT), and fatigue grade of structural detail as analytical parameters, the minimum weight sections that satisfy the limit states of the AASHTO LRFD design specification were determined through an optimization scheme. Likewise, the effects of the number of girders and span length on the applicability of high-strength steel were evaluated. Results show that high-strength steel may be employed in the steel bridge, since steel weight decreases with increasing yield strength regardless of the fatigue effect. Nonetheless, appropriate countermeasures against fatigue should be determined since it is a major factor in the effective use of high-strength steel in steel bridges.
전준창,경갑수,김석태,이희현 한국강구조학회 2002 韓國鋼構造學會 論文集 Vol.14 No.5
analyses have been carried out in order to check the aplicability of high-strength steel to amedium-sized steel bridge. Using the yield strength of steel, Average Daily Truck Trafic (ADTT), and fatigue grade of structural detail as analytical parameters, the minimum weight sections that satisfy the limit states of the AASHTO LRFD design specification were determined through an optimization scheme. Likewise, the effects of the number of girders and span length on the aplicability of high-strength steel were evaluated. Results show that high-strength steel may be employed in the steel bridge, since steel weight decreases with increasing yield strength regardles of the fatigue effect. Nonetheless, appropriate countermeasures against fatigue should be determined since it is a major factor in the effective use of high-strength steel in steel bridges. 본 연구는 중소규모의 일반 강교량에 대한 고강도 강재의 적용성을 수치해석적으로 검토하기 위해 수행되었다 . 강재의 항복강도,일평균 트럭교통량 및 구조상세의 피로등급을 해석변수로 하여 AASHTO LRFD 설계기준의 한계상태를 만족하는 최소중량단면을 최적화 기법을 적용하여 산정하고 그 결과에 대해 고찰하였다 . 또한, 교량의 거더 개수 및 경간길이의 변화가 고강도 강재의 적용성에 미치는 영향에 대해서도 검토하였다. 검토결과, 고강도 강재의 적용 가능성을 확인하였으나 , 고강도 강재를 보다 효율적으로 활용하기 위해서는 가장 지배적인 영향인자인 피로문제에 대한 적절한 대처가 필요함을 알 수 있었다 .