http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전덕우,박정호,이용권 한국건설순환자원학회 2022 한국건설순환자원학회 논문집 Vol.10 No.4
본 연구에서 폐차 처리되는 자동차 유리 중 일반 강화유리 즉 윈도우 유리를 사용하여 균일한 품질의 팽창유리 제조 기술을확보하고, 제조된 팽창유리가 리튬배터리 화재 진압용으로서 활용이 가능한지 검증하였다. 폐유리를 활용하여 팽창유리룰 제조하는 공정은 크게 폐유리 파쇄(Crushing) → 분쇄 (Milling)→ 구상화(Granulation) → 발포(Expansion) → 냉각(Cooling)으로 구분하며, 최종으로 팽창유리의 입자크기 1∼4 ø mm가 80 % 이상의 수율이 나오는최적 조건을 얻기 위해 실험을 수차례 수행하였다. 폐유리와 발포제의 배합량과 공정 조건에 따라 기공의 형태,겉보기 비중,표면적,흡수율,흡착율,기공율 및 안전성 등을 분석하였다. 기공의 형태는 SEM 표면 분석을 통해 이루어 졌으며, 겉보기 비중, 흡수율, 흡착율 및 기공율은 표준 시험법에 따라하였고 안전성은 8대 중금속 분석과 X-ray 회절 분석을 통해 결정화가 있는지 여부를 확인하였다. 표면분석과 물성치를비교하여 배터리용 소화약제로서 더 적합한 sample을 선정하여, 고부가가치의 활용이 가능한 리튬 배터리 화재의 적응성시험결과 만족한 것으로 확인되었다.
방사형 회전이 추가된 임팩트 크러셔를 이용한 콘크리트용 순환굵은골재 품질향상 및 검증 연구
전덕우,김용성,전찬수,최원영,조원익 한국건설순환자원학회 2022 한국건설순환자원학회 논문집 Vol.10 No.2
본 연구는 고품질의 콘크리트용 순환골재를 생산할 수 있는 타격 완충 장치인 방사형 회전판을 하단에 설치한 임팩트 크러셔를개발하고 이를 이용하여 생산한 순환굵은골재의 품질성능 향상 효과 및 콘크리트 실험을 통해 적용 가능 여부를 검증하는것을 목적으로 한다. 그 결과, 절대건조밀도, 흡수율, 마모감량, 입자모양판정실적률, 0.08 mm 체 통과량 시험에서 손실된양, 알칼리골재반응, 점토덩어리량, 안정성, 이물질함유량 등 모든 항목에서 개선된 품질을 나타내었고 순환골재 품질기준에서규정하는 기준에 부합하는 것으로 나타났다. 또한, 순환굵은골재를 적용한 콘크리트의 공기량 및 슬럼프는 국내 기준에 모두부합하며 순환굵은골재의 혼입률에 따른 콘크리트의 재령별 압축강도 특성 실험 결과에 따라 순환굵은골재의 혼입률 60 % 까지는 적용이 가능할 것으로 확인되었다.
음식물 탈리액 처리를 위한 막결합형 고온 2상 혐기성 소화 공정의 평가
이은영,전덕우,이상화,배재호,김정환,김영오 대한상하수도학회 2012 상하수도학회지 Vol.26 No.1
This study evaluated the performance of a thermophilic two-phase anaerobic digestion (TTPAD) coupled with membrane process treating garbage leachate. The pilot-scale treatment system is consisted of thermophilic acidogenic reactor (TAR) and thermophilic methanogenic reactor (TMR) coupled with an ultrafiltration (UF) membrane unit. The hydraulic retention time of TAR and TMR were 4and 20 days, respectively. Effluent TCOD and SCOD of the TTPAD were 25 ± 6 and 12 ± 3 g/L, respectively, and the corresponding TCOD and SCOD removal efficiencies were 77% and 81%, respectively. Propionate was major acids as 75% in the effluent. Scum formation was not observed in TTPAD, which might be resulted from complete lipid degradation. However, TTPAD was appeared to be sensitive to free ammonia toxicity. The UF membrane was operated with constant pressure filtration at average TMP 1.3 atm. Permeate flux had a range of 15-30 L/㎠/hr. With UF membrane, TCOD removal increased from 77% to 93%, and this SS free effluent would be beneficial to subsequent processes such as ammonia stripping
녹색전환을 위한 정책차관사업 정책과제 분석 : 세계은행 정책차관사업을 중심으로
서선재,전덕우,우아미,강한나 한국기후변화학회 2023 한국기후변화학회지 Vol.14 No.3
This study aims to derive implications for designing policy-based lending that lead to the green transition of developing countries. To do this, it analyzes the status of policy actions of the World Bank’s Development Policy Financing (DPF) which has been used as a lending tool for policy reformation. Most DPF projects were found to utilize weak innovation means that modify or supplement existing policies and systems, rather than promoting fundamental changes in social structure or technological innovation. This study recommends policy actions that promote technological innovation and societal restructuring to facilitate transitional changes, as presented by the ICAT (Table 3). In particular, considering the critical role of technology in green transition (e.g. Geels, 2005; Markard and Truffer, 2008), policy actions should be designed to create a technological innovation ecosystem, such as technical standards and guidelines, research and developmet investment, and training.
특집-막결합형 고온 이상 혐기성 소화공정에서 음폐수 처리 특성
김영오,전덕우 유기성자원학회 2012 유기물자원화 Vol.20 No.3
본 연구에서는 폐기물 자원화 공정에서 발생하는 음폐수를 UF 분리막을 결합한 혐기성 소화 파일럿에서 처리하면서 혐기성 소화효율, 바이오가스 생산량과 운전인자를 도출하였다. 운전방식은 막내부에서 외부로 고액분리가 이루어지는 가압식이었으며, 투과 플럭스는 15∼20 LMH, 막간 차압은 1∼3kgf/cm2 였다. 분리막 운전은 직접순환방식으로 운전한 결과, 메탄조의 수질악화로 간접순환방식으로 운전하였다. 유입수의 TCOD 와 SCOD 는 각각 113 g/L, 62 g/L 이었고, 유출수의 TCOD 와 SCOD는 각각 25 g/L, 12 g/L 이었다. TCOD 및 SCOD 제거효율은 각각 77% 및 81% 였다. 하지만 UF 공정을 추가했을 때는 제거효율이 93% 및 86% 로 증가하였다. In this study, Anaerobic Membrane Bioreactor(AnMBR) treating food waste leachate was operated to investigate treatment efficiency of anaerobic process, operational parameters and production of biogas. AnMBR was operated under the condition of filtration type of inside-out mode. AnMBR was operated under the condition that range of permeate flux was from 15 to 20 LMH and range of transmembrane pressure was from 1 to 3 kgf/cm2. It was not good that AnMBR was performed under direct connection between anaerobic reactor and external UF module. so, this connection method changed to indirect connection using buffer tank was placed between anaerobic reactor and UF external module. TCOD and SCOD values were that influent were about 113 g/L, 62 g/L and effluent were 25 g/L, 12 g/L, respectively. also TCOD and SCOD removal efficiency were 77% and 81%, respectively. but after added UF process, TCOD and SCOD removal efficiency was increased to 93% and 86%, respectively.
안영환,전덕우,Chung, Yong Woon 한국기후변화학회 2020 한국기후변화학회지 Vol.11 No.5
Interest in smart energy systems as a means to reduce greenhouse gas (GHG) emissions and mitigate climate change has been increasing. In particular, much attention is focused on the building sector, which has the highest potential for GHG reduction. Yet, there have been few studies that have thoroughly and quantitatively analyzed the potential amount of greenhouse gas reduction through introduction of building energy management systems (BEMS). This study focuses on empirical evidence generated by BEMS in Korea and analyzes the benefit to cost ratio of such installations for various types of buildings using individual building-level microdata from large buildings in the 2017 Energy Consumption Survey to quantitatively derive the potential for GHG reduction. According to the main research findings, the BEMS dissemination rate could increase by as much as 21 percent, which induces 3.3 percent of energy saving and 3.4 percent of GHG emission reduction. Among 9 sub-sectors, the telecommunications sub-sector has the largest dissemination rate (87.5 percent), and the department stores sub-sector has the lowest rate (1 percent).