구치부 간접 복합레진 수복물을 위한 임상 지침

장훈상 대한치과의사협회 2006 대한치과의사협회지 Vol.44 No.1

직접수복용 레진과 기공용 레진으로 제작한 레진 인레이를 투과한 광중합기의 광강도

장훈상,임영준,김정미,홍성옥 大韓齒科保存學會 2010 Restorative Dentistry & Endodontics Vol.35 No.5

연구목적: 본 연구는 직접수복용 레진 (Filtek Z350, Supreme XT)과 기공용 레진 (Sinfony)으로 제작한 레진 인레이를 투과하는 광중합기의 광강도를 측정하고 레진 인레이를 구성하는 색조에 따라 투과되는 광강도를 측정하였다. 연구 재료 및 방법: A3 색조의 레진 인레이를 Z350 A3 한 가지 색조로 제작한 것과 Supreme XT A3B와 A3E 두 가지 색조로 제작한 것을 이용하였으며 Sinfony는 제조사의 지시에 따라 A3, E3, T1 세 가지 색조로 제작하였고 두께는 1.5 mm로 통일하였다. 할로겐 광중합기 (Optilux 360)와 LED 광중합기 (Elipar S10)를 이용하여 레진 인레이를 투과하는 광강도를 휴대용 광강도 측정기 (Cure Rite)로 측정하였다. 각 레진의 색조가 광강도의 투과에 미치는 영향을 분석하기 위해 0.5mm 두께로 레진 시편을 제작하여 광강도를 측정하였다. 결과: Z350 A3로 제작한 레진 인레이를 투과한 광강도가 가장 낮았으며, 다음으로 Supreme XT A3B와 A3E로 제작한 레진 인레이, 그리고 Sinfony A3, E3, T1으로 제작한 레진 인레이 순으로 광강도가 유의하게 증가하였다 (p < 0.05). 0.5mm의 레진 시편을 투과한 광강도를 측정한 결과 dentin shade인 Sinfony A3, Z350 A3, Supreme XT A3B가 가장 낮았으며, enamel shade인 Supreme XT A3E, Sinfony E3, 그리고 translucent shade인 Sinfony T1 순으로 유의하게 증가하였다 (p < 0.05). 결론: 레진 인레이를 제작할 경우 단색의 직접 수복용 레진을 사용하기 보다는 기공용 레진의 dentin shade, enamel shade, translucent shade를 모두 사용하는 것이 레진 인레이 하방으로 더 많은 중합광을 투과시킬 수 있는 것으로 사료된다. Objectives: The purpose of this study was to measure the power density of light curing units transmitted through resin inlays fabricated with direct composite (Filtek Z350, Filtek Supreme XT) and indirect composite (Sinfony). Materials and Methods: A3 shade of Z350, A3B and A3E shades of Supreme XT, and A3, E3, and T1 shades of Sinfony were used to fabricate the resin inlays in 1.5 mm thickness. The power density of a halogen light curing unit (Optilux 360) and an LED light curing unit (Elipar S10) through the fabricated resin inlays was measured with a hand held dental radiometer (Cure Rite). To investigate the effect of each composite layer consisting the resin inlays on light transmission, resin specimens of each shade were fabricated in 0.5 mm thickness and power density was measured through the resin specimens. Results: The power density through the resin inlays was lowest with the Z350 A3, followed by Supreme XT A3B and A3E. The power density was highest with Sinfony A3, E3, and T1 (p < 0.05). The power density through 0.5 mm thick resin specimens was lowest with dentin shades, Sinfony A3, Z350 A3, Supreme XT A3B, followed by enamel shades, Supreme XT A3E and Sinfony E3. The power density was highest with translucent shade, Sinfony T1 (p < 0.05). Conclusions: Using indirect lab composites with dentin, enamel, and translucent shades rather than direct composites with one or two shades could be advantageous in transmitting curing lights through resin inlays.

감염 조절용 차단막의 두께가 광중합기의 중합광에 미치는 영향

장훈상,이석련,홍성옥,류현욱,송창규,민경산 大韓齒科保存學會 2010 Restorative Dentistry & Endodontics Vol.35 No.5

연구목적: 본 연구는 감염 조절용 차단막을 여러 겹으로 사용했을 때 광중합기의 광강도와 파장, light diffusion 등에 미치는 영향에 대해 조사하였다. 연구 재료 및 방법: 감염 조절용 차단막은 투명 랩 (크린랩)을 사용하였고 광중합기는 할로겐 광중합기 (Optilux 360)와 LED 광중합기 (Elipar FreeLight 2)를 사용하였다. 차단막을 1겹, 2겹, 4겹, 8겹으로 광중합기의 광섬유말단을 감싸고 휴대용 광강도 측정기 (Cure Rite)로 광중합기의 광강도를 측정하였다. 광중합기를 주문제작한 optical breadboard에 고정시킨 후 휴대용 spectroradiometer (CS-1000)를 이용하여 광중합기의 파장을 측정하였고, DSLR (Nikon D70s)을 이용하여 광중합기의 light diffusion을 사진 촬영하였다. 결과: 광강도 측정 결과는 차단막의 두께가 증가할수록 광강도가 유의하게 감소하였으나 할로겐 광중합기에서 1겹과 2겹 사이에는 유의차가 없었으며, 4겹 이상의 차단막을 투과할 때 광강도가 더 많이 감소하였다. 여러 겹의 차단막을 투과한 광중합기의 전체적인 파장 형태와 peak wavelength의 변화는 관찰되지 않았다. Light diffusion 사진 촬영 시, LED 광중합기에서는 차단막의 두께가 미치는 영향이 없었으나 할로겐 광중합기에서는 차단막을 4겹 사용했을 때부터 중합광이 조사되는 각도가 감소하기 시작하여 8겹 사용했을 때 통계적으로 유의하게 감소하는 것을 볼 수 있었다 (p < 0.05). 결론: 광중합형 복합레진을 광중합할 경우 감염 조절용 차단막이 찢어지는 경우를 대비하여 1겹으로 사용하기 보다는 2겹으로 사용하는 것이 환자간의 교차감염을 예방하는데 유리할 것으로 사료된다. Objectives: This study investigated the effect of infection control barrier thickness on power density, wavelength, and light diffusion of light curing units. Materials and Methods: Infection control barrier (Cleanwrap) in one-fold, two-fold, four-fold, and eightfold, and a halogen light curing unit (Optilux 360) and a light emitting diode (LED) light curing unit (Elipar FreeLight 2) were used in this study. Power density of light curing units with infection control barriers covering the fiberoptic bundle was measured with a hand held dental radiometer (Cure Rite). Wavelength of light curing units fixed on a custom made optical breadboard was measured with a portable spectroradiometer (CS-1000). Light diffusion of light curing units was photographed with DSLR (Nikon D70s) as above. Results: Power density decreased significantly as the layer thickness of the infection control barrier increased, except the one-fold and two-fold in halogen light curing unit. Especially, when the barrier was four-fold and more in the halogen light curing unit, the decrease of power density was more prominent. The wavelength of light curing units was not affected by the barriers and almost no change was detected in the peak wavelength. Light diffusion of LED light curing unit was not affected by barriers, however, halogen light curing unit showed decrease in light diffusion angle when the barrier was four-fold and statistically different decrease when the barrier was eight-fold (p < 0.05). Conclusions: It could be assumed that the infection control barriers should be used as two-fold rather than one-fold to prevent tearing of the barriers and subsequent cross contamination between the patients.

韓國 職業 訓鍊 制度의 改善 方案

張勳相 조선대학교 경영경제연구소 1999 經營經濟硏究 = Management and economics research Vol.22 No.1

Light curing of dual cure resin cement

장훈상 대한치과보존학회 2013 Restorative Dentistry & Endodontics Vol.38 No.4

Push-out bond strengths of fiber-reinforced composite posts with various resin cements according to the root level

장훈상,노영신,이윤,민경산,배지명 대한치과보철학회 2013 The Journal of Advanced Prosthodontics Vol.5 No.3

PURPOSE. The aim of this study was to determine whether the push-out bond strengths between the radicular dentin and fiber reinforced-composite (FRC) posts with various resin cements decreased or not, according to the coronal, middle or apical level of the root. MATERIALS AND METHODS. FRC posts were cemented with one of five resin cement groups (RelyX Unicem: Uni, Contax with activator & LuxaCore-Dual: LuA, Contax & LuxaCore-Dual: Lu, Panavia F 2.0: PA, Super-Bond C&B: SB) into extracted human mandibular premolars. The roots were sliced into discs at the coronal, middle and apical levels. Push-out bond strength tests were performed with a universal testing machine at a crosshead speed of 0.5 mm/min, and the failure aspect was analyzed. RESULTS. There were no significant differences (P>.05) in the bond strengths of the different resin cements at the coronal level, but there were significant differences in the bond strengths at the middle and apical levels (P<.05). Only the Uni and LuA cements did not show any significant decrease in their bond strengths at all the root levels (P>.05); all other groups had a significant decrease in bond strength at the middle or apical level (P<.05). The failure aspect was dominantly cohesive at the coronal level of all resin cements (P<.05), whereas it was dominantly adhesive at the apical level. CONCLUSION. All resin cement groups showed decreases in bond strengths at the middle or apical level except LuA and Uni.

Plugger temperature of cordless heat carriers according to the time elapsed

장훈상,Jin-Woo Kim,Se-Hee Park,Kyung-Mo Cho 대한치과보존학회 2018 Restorative Dentistry & Endodontics Vol.43 No.1

Objective The purpose of this study was to measure the temperature of the plugger tip of 3 cordless heat carriers set at 200°C. Materials and Methods Pluggers of the same taper (0.06, 0.08, 0.10) and similar tip sizes (sizes of 50 and 55) from 3 cordless heat carriers, namely SuperEndo-α2 (B & L Biotech), Friendo (DXM), and Dia-Pen (Diadent), were used and an electric heat carrier, System B (SybronEndo), was used as the control. The plugger tips were covered with customized copper sleeves, heated for 10 seconds, and the temperature was recorded with a computerized measurement system attached to a K-type thermometer at room temperature (n = 10). The data were analyzed with 2-way analysis of variance at a 5% level of significance. Results The peak temperature of the plugger tips was significantly affected by the plugger taper and by the heat carrier brand (p < 0.05). The peak temperature of the plugger tips was between 177°C and 325°C. The temperature peaked at 207°C–231°C for the 0.06 taper pluggers, 195°C–313°C for the 0.08 taper pluggers, and 177°C–325°C for the 0.10 taper pluggers. Only 5 of the 12 plugger tips showed a temperature of 200°C ± 10°C. The time required to reach the highest temperature or 200°C ± 10°C was at least 4 seconds. Conclusion When using cordless heat carriers, clinicians should pay attention to the temperature setting and to the activation time needed to reach the intended temperature of the pluggers.

Dexamethasone투여가 방사선조사 후 타액선 기능에 미치는 영향

장훈상,홍원표,조규종,김영찬,이호기 대한이비인후과학회 1991 대한이비인후과학회지 두경부외과학 Vol.34 No.5

광중합기 사용 시의 감염 조절

장훈상 大韓齒科保存學會 2010 Restorative Dentistry & Endodontics Vol.35 No.4

복합레진을 광중합할 경우 광중합기의 광섬유말단은 환자의 구강점막과 직접 접촉하게 되어 광섬유말단의 오염이 불가피하다 광섬 유말단은 Centers for Disease Control and Prevention (CDC)에서 “semicritical category" 로 분류되며 가압증기 멸균을 하거나, 화학 용액에 10시간이상 잠기도록 넣어 멸균을 하거나 최소한 고도의 소독처리를 하도록 요구한다. 현재 광중합기의 광섬유말단을 멸균/소독하는 방법은 가압증기멸균이 가능한 광섬유말단을 사용하여 멸균하는 법, 매 환자마다 glutaraldehyde와 같은 화학용액으로 멸균/소독을 하는 법, 멸균되어 시판되는 일회용 플라스틱 광섬유말단을 사용하는 법, 그리고 투병 랩과 같은 일회용 차단막으로 광섬유말단을 감싸는 방법 등이 있다. 일회용 차단막을 사용할 경우 광섬유말단과 환자의 구강점막의 직접적인 접촉을 막아 비교적 간단하게 교차감염의 위험성을 줄일 수 있다. When curing the composite restorations with light curing units. the light guides are often in direct contact with oral tissues. therefore contamination of light guides is inevitable. Curing light guides fall into the "semicriticaf" instrument category according to the Centers for Disease Control and Prevention (CDC) and must be heat or vapor-sterilized or at a minimum. these semicritical instruments must be sterilized in a liquid chemical agent. Currently. most common methods of maintaining sterility of the light guides are wiping the guide with a disinfectant. such as glutaraldehyde. after each patient use; using autoclavable guides: using presterilized. single-use plastic guides: and using translucent disposable barriers to cover the guide.

수종의 미백제가 법랑질에서 복합레진의 미세전단강도에 미치는 영향

장훈상,조경모,김진우 대한치과보존학회 2004 Restorative Dentistry & Endodontics Vol.29 No.3

This study evaluated the microshear bond strength of composte resin to teeth bleached with commercial whitening strips and compared with those bleached with home bleaching gel. Twelve extracted human central incisors were cut into pieces and central four segments were chosen from each tooth and embedded in acrylic resin. Four blocks with 12 tooth segments embedded in acrylic resin were acquired and numbered from group one to group four. Group 1 was bleached with Crest Whitestrips, group 2 with Claren, group 3 with Opalescence tooth whitening gel (10% carbamide peroxide). Group 4 was used as control. The bleaching procedure was conducted for 14 days according to the manufacturer's instructions; the bleaching strips twice a day for 30 min and the bleaching gel once a day for 2 hr. After bleaching, composite resin (Filtek Supreme) was bonded to the enamel surfaces with a self-etching adhesive (Adper Prompt L-Pop) using Tygon tube. Microshear bond strength was tested with a universal testing machine (EZ-test). The data were statistically analysed by one-way ANOVA. The study resulted in no statistical differences in microshear bond strength between the tooth segments bleached with 2 different whitening strips and bleaching gel. It can be concluded that the effect of bleaching with either commercial whitening strips or bleaching gel on enamel is minimal in bonding with self-etching adhesive to composite resin.