3가 양이온 산화물이 첨가된 2Y-TZP의 저온 상안정성

장주웅,김학관,이득용,김대준,박선민,Jang, Ju-Woong,Kim, Hak-Kwan,Lee, Deuk-Yong,Kim, Dae-Joon,Park, Sun-Min 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.11

정방정 지르코니아의 상안정성 및 저온열화기구를 고찰하기 위해 Y2O3 안정화 지르코니아에 3가 양이온 산화물을 첨가한 후 그 소결체의 기계적 물성, 라만 스펙트럼 및 격자상수 변화 등을 관찰하였다. 2Y-TZP에 $Zr^{4+}$ 보다 이온크기가 큰 3가 양이온($Sc^{3+},\;Yb^{3+},\;Y^{3+},\;Sm^{3+},\;Nd^{3+},\;La^{3+}$)들을 2 mol%까지 첨가하여 $1500{\circ}C$에서 1시간 소결후, X-ray 상분석 결과 $La^{3+}$의 경우에는 0.5 mol% 이상 첨가시 pyrochlore 상$(La_2Zr_2O_7)$의 형성으로 정방정상의 상안정성이 저하되었다. 첨가량이 증가할수록 $Zr6{4+}$과 이온크기가 거의 비슷한 $Sc^{3+}$를 첨가한 경우에는 정방정상만 관찰되었으나 $Yb^{3+},\;Y^{3+},\;Sm^{3+},\;Nd^{3+}$를 첨가한 경우에는 입방정상이 형성되었다. 양이온 크기가 커질수록 c/a비는 증가하였으나 $220{\circ}C$에서 500시간까지 열처리후 상분석 결과 단사정량은 감소하였다. The phase stability and the Low Temperature Degradation(LTD) mechanism of Tetragonal Zirconia Polycrystals(TZP), sintered specimens of $Y_2O_3$-Stabilized Zirconia(2Y-TZP), doped with trivalent cations, were evaluated by investigating meachnical properties, Raman spectra, lattice parameter variation and the oxygen vacancy behavior under applied electric field. XRD observation was put forward on 2Y-TZP doped with trivalent cation whose ionic radii were larger than $Zr^{4+}(Sc^{3+},\;Yb^{3+},\;Y^{3+},\;Sm^{3+},\;Nd^{3+},\;La^{3+})$ up to 2 mol% and sintered at 1500 h for 1h. For $La^{3+}$ doping, the stability of tetragonal phase was degraded due to the formation of the pyrochlore phase $(La_2Zr_2O_7)$ as the dopant content increased above exceeded 0.5 mol%. As the dosage increased, tetragonal phase maintained for the case of $Sc^{3+}$, whose radius was similar to $Zr^{4+}$, on the other hand, the cubic phase was formed for the cases of $Yb^{3+},\;Y^{3+},\;Sm^{3+},\;Nd^{3+}$. As the radii of dopant cation increased, c/a ratio increased and it was experimentally observed that the amount of monoclinic phase decreased when the specimens were annealed at $220{\circ}C$ for 500 h.

인가 전압이 Y-TZP의 저온열화에 미치는 영향

장주웅,이홍림,김대준,오남식,이득용 한국세라믹학회 1997 한국세라믹학회지 Vol.34 No.12

Influence of applied electric field on the low temperature degradation of 3 mol% YaO3 stabilized tetragonal zirconia polycrystals(3Y-TZP) was investigated using X-ray diffractometry of specimens aged under the dc field of 1.1 kV/mm in silicone oil both of 12$0^{\circ}C$-21$0^{\circ}C$. After the aging, the tetragonal to monoclinic phase transformation was observed only on the specimen surface of 3Y-TZP faced to the anode. This indicated that the surface was overcrowded with oxygen ions as a result of diffusion of oxygen vacancies toward the cathode-sided surface. To elucidate an influence of the applying time of the electric field on the extent of the degradation of 3Y-TZP in air, specimens were aged fore 0-2 hours under the electric field in the oil bath of 12$0^{\circ}C$ and then subsequently aged for 3h at 22$0^{\circ}C$ in air. The longer the specimens were aged under the field, the more extensive the transformation to the monoclinic phase was on the specimen surface faced to the cathode, probably originated from a high diffusion rate of oxygen ions due to a steep oxygen vacancy concentration gradient.

스피넬 전성형체의 $La_2$O_3-A1_2O_3-SiO_2$계 유리 침투 kinetic

이득용,장주웅,김병수,김대준,송요승 한국결정성장학회 2002 韓國結晶成長學會誌 Vol.12 No.1

상용 스피넬 분말(0.94$\mu$m)을 $1300^{\circ}C$ 2시간 열처리한 후 30분 동안 습식혼합하여 3.29$\mu$m의 최종분말을 제조하여 die-press법을 이용하여 $1100^{\circ}C$에서 2시간 1차 소결하여 다공성 전성형체를 제조하고 $1080^{\circ}C$에서 0~2시간가지 $La_2O_3-A1_2O_3-SiO_2$계 유리를 용응 침투시켜 유리 침투 깊이와 시간간의 kinetic을 조사하였다 유리 침투시간이 증가할수록 침투깊이는 모세관압에 의하여 parabolic하게 증가하였다. 유리-스피넬 복합체의 강도와 인성값은 각각 317MPa, 3.56MPa . $m^{1/2}$이 었으며 $1300^{\circ}C$의 높은 하소온도로 인한 재결정에 의하여 스피넬은 침상과 다각형 조직이 동시에 존재하는 이중 미세조직 이 관찰되었다. Abstract Spinel powder having a particle size of 0.9$\mu$m was calcined for 30 min at $1300^{\circ}C$, followed by ball milling for 4h, to obtain the spinel particle size of 3.29$\mu$m. The die-pressed spinel was presintered at $1100^{\circ}C$ for 2h and then lanthanum aluminosilicate glass was infiltrated at $1080^{\circ}C$ for 0~2 h to investigate the penetration kinetics in glass-spinel composite. The infiltration distance is parabolic in time due to capillarity. The strength and the fracture toughness of glassspinel composites were 317 MPa and 3.56 MPa $m^{1/2}$ respectively and dual microstructure of column (needle) and polygonal shapes as a result of recrystallization was observed due to the high calcination temperature.

Electrospun poly(D,L-lactic acid)/gelatin membrane using green solvent for absorbable periodontal tissue regeneration

정다연,장주웅,이득용 한국결정성장학회 2023 한국결정성장학회지 Vol.33 No.3

Electrospinning was performed using an eco-friendly solvent composed of acetic acid, ethyl acetate and distilled water to investigate the effect of gelatin concentration on mechanical properties and cytotoxicity of absorbable poly(D,L-lactic acid) (PDLLA)/gelatin blend membrane. The tensile stress, strain at break, and WUC of the PDLLA/gelatin (97/3) scaffold at 26 wt% concentration were determined to be 3.9 ± 0.7 MPa, 37 ± 1.3 %, and 273 ± 33 %, respectively. FT-IR results revealed that PDLLA and gelatin were bound only by van der Waals interactions. The cell viability of PDLLA/gelatin membranes containing 0 %, 1 %, 2 %, 3 %, and 4 % gelatin were more than 100 %, which makes all membranes highly suitable as a barrier membrane for absorbable periodontal tissue regeneration due to their marketed physical properties and biocompatibility.

인공치관용 알루미나/지르코니아-유리 복합체의 기계적 및 광학적 특성

이득용,장주웅 한국결정성장학회 2003 한국결정성장학회지 Vol.13 No.3

용융침투법으로 알루미나/지르코니아-유리 복합체를 제조하여 지르코니아 첨가가 복합체의 기계적 및 광학적 특성과 유리 침투 kinetic에 미치는 영향을 조사하였다. 유리 침투시간이 증가할수록 침투깊이는 Washburn식에 의한 포물선관계로 증가하였으며 침투 상수인 K는 기공 크기의 함수로 지르코니아 첨가량이 증가할수록 기공 크기의 감소로 감소하였다. 지르코니아 양이 증가함에 따라 명도($L^*$)는 증가하지만 유리 침투 상수(K), 투과율(transmittance), 채도($C^*$)가 감소하였다. 지르코니아가 15 wt% 첨가될 때까지 알루미나/지르코니아-유리 복합체의 인성값 증가를 보였지만 기공률의 증가로 인하여 기계적 특성 향상에는 크게 기여하지 않았다. Alumina/zirconia-glass composites prepared by melt-infiltration were investigated to evaluate the influence of zirconia addition on mechanical and optical properties of the composites and glass penetration kinetics. The infiltration distance was parabolic with respect to time as described by the Washburn equation and the penetration rate constant, K, decreased due to the reduction In pore size as the amount of zirconia rose. The zirconia addition increased lightness ($L^*$) but reduced K, transmittance and color sharpness ($C^*$) It can be concluded that the zirconia addition was not effective to the mechanical properties of the composites due to the increase in porosity even though the toughness of the composites increased when zirconia was added up to 15 wt%.

생체재료의 선택에 따른 조골세포의 형상, 증식 및 분화

김학관,장주웅,정희석,이득용 한국세라믹학회 2003 한국세라믹학회지 Vol.40 No.6

재료의 선택에 따른 생체친화성을 고찰하기 위해서 조골세포의 세포배양실험을 실시하였으며, 이로부터 세포의 부착형상, 증식, 분화의 정도를 살펴보았다. 본 실험에서 세포배양모재는 체내식립재료로 주목을 받고 있는 TiO$_2$, 3Y-TZP, HA (Hydroxyapatite) 그리고 Ti를 사용하였으며 대조군으로 Thermanox를 선택하였다. 일반적으로 모든 시편들은 같은 세포배양시간일때 거의 유사한 세포부착형상을 보였다. 그러나, HA위의 세포들은 나머지 시편들보다 좀 더 두꺼운 형상을 보였으며 빠른 세포의 부착 및 퍼짐으로 인한 overlapping이 자주 관찰되었다. 세포의 증식 및 분화의 경우에도 생체활성의 특성을 지니는 HA가 가장 높은 값을 보였으며 생체불활성재료인 경우에는 Ti, TiO$_2$, 3Y-TZP모두 유의한 차이를 보이지 않고 비슷한 경향을 나타내었다. Osteoblast-like cell morphology, proliferation, and differentiation were examined in variation with biomaterials. Cells were cultured on TiO$_2$, Ti, 3Y-TZP, HA (Hydroxyapatite) and Thermanox was used as a control specimen. Generally, all specimens have similar cell morphology within the same time interval. However, cells on HA seem to be more thicker than those on TiO$_2$, Ti, 3Y-TZP and cell overlapping was detected very frequently on HA. In case of cell proliferation and differentiation, bioactive material such as HA could help osteoblast-like cell proliferate and provoke a sharp increase of ALP. On the other hand, whether the substrate material is a bioinert ceramics or metal, it does not so strongly affect the cell attachment, proliferation. and differentiation.

용융침투법으로 제조한 유리-알루미나 복합체: II. Kinetic 연구

이득용,장주웅,이명현,이준강,김대준,박일석,Lee, Deuk-Yong,Jang, Joo-Wung,Lee, Myung-Hyun,Lee, Jun-Kwang,Kim, Dae-Joon,Park, Il-Seok 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.2

상용 알루미나 분말(0.5, 2.8, 12, 45 ${\mu}m$)을 die-press법을 이용하여 1120$^{\circ}C$에서 2시간 1차 소결하여 다공성 전성형체를 제조하고 1100$^{\circ}C$에서 0∼2시간까지 $La_2O_3-Al_2O_3-SiO_2$계 유리를 용융 침투시켜 유리 침투 깊이와 침투 시간간의 kinetic을 조사하였다. 침투시간이 증가할수록 유리 침투깊이는 Washburn 식의 포물선 관계를 가지면서 증가하였으며 침투 상수인 K는 알루미나 입도가 증가할수록 증가하였다. 유리-알루미나 복합체의 강도값은 2.8${\mu}m$ 알루미나가 분산된 복합체까지 충진률의 증가로 인하여 증가하다가 알루미나 입도가 증가할수록 감소하였다. 파괴인성은 알루미나 입도가 증가할수록 균열 휨 현상과 균열과 알루미나 입자간 결합에 의하여 증가하였다. Four commercial alumina powders having different particle size of $0.5{\mu}m,\;2.8{\mu}m,\;12{\mu}m,\;and\;45{\mu}m$ were presintered at 1120$^{\circ}C$ for 2h and then lanthanum aluminosilicate glass was infiltrated at 1100$^{\circ}C$ for 2h in the interval of 0.1h to investigate the penetration kinetic of the glass into the alumina preforms. The infiltration distance is parabolic with respect to time as described by the Washburn equation and the penetration rate constant, K, increases with raising the alumina particle size. The strength of glass-alumina composites increases as the alumina particle size reaches to 2.8${\mu}m$ due to the increase in packing, however, decreases with further increasing the alumina particle size. The fracture toughness of the composites rises with increasing the alumina particle size due to the crack bowing and the interaction between crack and alumina particles.

용융침투법으로 제조한 유리-알루미나 복합체: Ⅰ. 알루미나 입도 효과

이득용,장주웅,김대준,박일석,이준강,이명현,김배연,Lee, Deuk-Yong,Jang, Ju-Woong,Kim, Dae-Joon,Park, Il-Seok,Lee, Jun-Kwang,Lee, Myung-Hyun,Kim, Bae-Yeon 한국세라믹학회 2001 한국세라믹학회지 Vol.38 No.9

Two commercial alumina powders having different particle size of $0.5{\mu}m$ and 3${\mu}$m were presintered at 1120$^{\circ}$C for 2h and then lanthanum aluminosilicate glass was infiltrated at 1100$^{\circ}$C for up to 4h to obtain the densified glass-alumina composites. The effect of alumina particle size on packing factor, microstructure, wetting, porosity and pore size, and mechanical properties of the composite was investigated. The optimum mechanical properties and compaction behavior were observed for the 3${\mu}$m alumina particle dispersed composite. The 3${\mu}$m alumina particle size and distribution for he preform were within 0.1 to 48${\mu}$m and bimodal and random orientation. The strength and the fracture toughness of the composite having 3${\mu}$m alumina particles were 519MPa and $4.5MPa{\cdot}m^{1/2}$, respectively. 상용 알루미나 분말(0.5${\mu}$m, 3${\mu}$m)을 die-press법을 이용하여 1120$^{\circ}$C에서 2시간 1차 소결하여 다공성 전성형체를 제조하고 1100$^{\circ}$C에서 4시간 $La_2O_3-Al_2O_3-SiO_2$계 유리를 용융 침투시켜 치밀한 유리-알루미나 복합체를 제조하였다. 알루미나 입도가 유리-알루미나 복합체의 충진율, 미세조직, 젖음성, 기공률 및 크기, 기계적 특성에 미치는 영향을 조사하였다. 입도 범위가 0.1∼48${\mu}$m로 넓고 bimodal size 입도 분포를 가지면서 random orientation을 가진 3${\mu}$m 알루미나가 분산된 복합체가 최적의 기계적 특성 및 충진률이 관찰되었으며 강도와 인성값은 각각 519MPa, $4.5MPa{\cdot}m^{1/2}$이었다.

In vitro study to the biocompatibility of poly(vinyl alcohol) hydrogel for Articular Cartilage Replacement

정홍희,최연락,장주웅,심영복,이광일 한국고분자학회 2009 한국고분자학회 학술대회 연구논문 초록집 Vol.2009 No.4

Divinyl Sulfone으로 가교된 히알루론산 마이크로비드의 특성평가

김진태,이득용,장주웅,김태형,장용운,Kim, Jin-Tae,Lee, Deuk Yong,Jang, Ju-Woong,Kim, Tae-Hyung,Jang, Yong-Wun 대한의용생체공학회 2013 의공학회지 Vol.34 No.3

Hyaluronic acid(HA) microbeads were synthesized by dropping the sodium hyaluronate(Streptococcus) solutions in NaOH into a solution mixture of divinyl sulfone(DVS) in 2-methyl-1-propanol, followed by stirring, cleaning and drying process at room temperature. The initial experimental conditions are crosslinking time(CLTi) of 5 h, crosslinking temperature(CLTe) of room temperature, injection air pressure(IAPr) of 5 psi, and DVS concentration( DVSc) of 0.2 vol%, respectively. Then, parametric studies were performed by varying the parameters to investigate the morphology, the porosity, the swelling ratio and the size of the beads. The microbead size pattern was not regular to function of the degree of crosslink. It was observed that the swelling ratio, the degree of crosslink, and the pore size can be controlled by adjusting the CLTi, CLTe and DVSc. Among the parameters investigated, the smallest bead size can be achieved by varying the CLTi parameter. The lowest swelling ratio, as an indication of the highest degree of crosslink, can be obtained by varying CLTe.