http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
핸드오버 지연 시간을 줄일 수 있는 심리스 핸드오버 프로토콜 제안 및 성능 분석
장종민,이유태,이숭희,김동일,최삼길,Jang, Jong-Min,Lee, Yu-Tae,Lee, Soong-Hee,Kim, Dong-Il,Choi, Sam-Gil 한국정보통신학회 2009 한국정보통신학회논문지 Vol.13 No.2
With significant development in wireless communication technologies, the needs to handover from one network to another have grown dramatically. Recently IETF developed MIPv6 and FMIPv6 which are used to handover between different access networks. These handover mechanisms have some known weaknesses. MIPv6 can not serve time-critical application because it causes long handover latency and packet loss. By these reasons, MIPv6 does not guarantee session continuity. FMIPv6 uses handover preparation phase to reduce DAD latency. However FMIPv66 still suffers from long handover latency, because it must perform binding update at the end of handover procedure. In this paper we propose new handover mechanism FMIPv6-PBU which eliminates binding update latency. The proposed mechanism has compatability with lagacy FMIPv6. In this paper propose FMIPv6-PBU handover procedure and explain its procedures and evaluate it with MIPv6 and FMIPv6. 무선 이동 통신기술과 이동 단말의 발달로 이종망간 핸드오버에 대한 요구가 증가하고 있다. IETF는 All-IP 기반 네트워크에서 이종 엑세스 네트워크 사이의 핸드오버를 위한 표준을 정의하는 MIPv6와 FMIPv6를 개발하였다. MIPv6는 단말의 핸드오버가 수행되는 동안 긴 지연 시간과 패킷 손실을 유발함으로써 시간에 민감한 서비스의 세션 연속성을 보장하지 못했다. FMIPv6는 핸드오버 준비 과정에서 주소를 미리 구성하고 엑세스 라우터가 패킷을 버퍼링 하도록 함으로써 패킷 손실의 가능성을 줄였다. 그러나 FMIPv6는 여전히 핸드오버의 마지막 과정으로 바인딩 갱신을 수행해야 하는데, 이로 인한 지연 시간은 실시간 애플리케이션에 지연을 유발한다. 본 논문에서는 FMIPv6와 호환가능하며 바인딩 갱신에 필요한 시간을 줄일 수 있는 새로운 프로토콜을 제안하고, 성능분석을 통해 기존 프로토콜의 핸드오버 지연시간과 비교한다.
고주파 아크 금속용사 장치의 시공성능 평가에 관한 실험적 연구
장종민 ( Jang Jong-min ),이한승 ( Lee Han-seung ) 한국건축시공학회 2020 한국건축시공학회지 Vol.20 No.6
아크 금속용사 공법을 활용한 EMP 차폐기술을 개발하기 위하여 국내에서 사용되는 3종류의 금속용사 장치의 시공성능을 평가하였다. MS, KMS, HMS에서 용사금속의 부착량은 각각 58.32%, 64.66%, 87.62%로 나타났다. 또한, 1시간당시공면적(m<sup>2</sup>/h)은 MS가 14.3, KMS가 19.25, HMS가 22.16으로서 나타났으며, HMS공법의 경우 Φ1.6mm의 선재 사용, 용사면적 80mm 형성, 반선속도 18m/min 사용과 함께 금속용사 시공시의 비산량이 대폭 작아졌기 때문으로 판단된다. 따라서, 시공성능 측면에서 HMS공법이 EMP차폐용 아크 금속용사공법으로 가장 적합하다고 판단된다. The arc thermal metal spraying method (ATMSM) has been used in Korea to improve the electromagnetic pulse (EMP) shielding effect of building and infrastructure by three machines of MS, KMS and HMS (Metal Spray, Korea Metal Spray, High-frequency Meta Spray). The adhesion ability of sprayed metal was found to be 58.32, 64.66 and 87.62% for MS, KMS and HMS, respectively. The metal sprayed area per hour of MS, KMS and HMS was calculated and found to be 14.3, 19.25 and 22.16m<sup>2</sup>/h, respectively. The HMS showed the highest metal spray area attributed to the diameter of metal wire i.e. 1.6mm which sprayed 80 mm with 18 m/min. There was minimum loss of metal and the highest efficiency by HMS compared to others. Therefore, it is suggested to use HMS for metal spraying by ATMSM to enhance the EMP shielding effect.
아크 금속 용사 공법에 의해 코팅된 콘크리트의 전자기파 차폐 성능 확보를 위한 실 험적 연구
장종민 ( Jang Jong-min ),정화랑 ( Jeong Hwa-rang ),이한승 ( Lee Han-seung ) 한국건축시공학회 2021 한국건축시공학회지 Vol.21 No.6
본 연구에서는 기존의 전자기파 차폐 성능이 없는 콘크리트를 대상으로 아크 금속용사 공법을 적용하여 전자기파 차폐성능을 확보하고자 한다. 이를 위해 금속 코팅의 두께에 전기적 특성을 평가하기 위해서 8 종류의(Cu, CuAl, CuNi, CuZn, Al, Zn, ZnAl, AlMg) 금속들을 두께 100, 200 및 500μm의 금속 코팅으로 제작하여 4pin-probe로 표면에서의 전기전도도를 측정하였고, KS C 0304에 의거하여 전자기파 차폐 성능 시험을 실시하였다. 금속 코팅 시험 결과를 토대로 전자기파 차폐를 위한 최적의 금속 코팅 두께 200μm를 제안하였으며, 이를 300×300×100mm 콘크리트 시험체에 용사하여 전자기파 차폐 성능을 분석한 결과 목표 성능 1GHz에서 80dB의 전자기파 차폐 성능이 확보됨을 확인하였다. 하지만 부착 강도의 경우 최대 1.11MPa로 목표 성능 대비 74% 이하로 확인되어 추후 콘크리트 표면에 미세한 요철을 형성하여 부착 성능을 향상시키는 연구가 필요할 것으로 판단된다. In this study, an electromagnetic pulse shielding effect was obtained by applying the arc metal spraying method to the ordinary concrete. For this study, to evaluate the electrical properties in the thickness of the metal sprayed coating, 8 types of metals(Cu, CuAl, CuNi, CuZn, Al, Zn, ZnAl, AlMg) were sprayed as coatings with a thickness of 100, 200 and 500μm. The electrical conductivity on the surface was measured with a 4-pin probe, and an electromagnetic wave shielding effect test was performed according to KS. Based on the test results, 200 μm was proposed as an optimal metal coating thickness for electromagnetic pulse shielding, and it was thermally sprayed on a 300×300×100mm concrete specimen to analyze the electromagnetic wave shielding performance. However, in the area of adhesion strength, the maximum was 1.11MPa, which was found to be less than 74% of the target performance.
콘크리트 표면 처리 방법 및 용사면에 따른 Zn-Al 금속 용사 피막의 물리적 특성 평가
장종민 ( Jang Jong-min ),양현민 ( Yang Hyun Min ),이한승 ( Lee Han-seung ) 한국건축시공학회 2022 한국건축시공학회 학술발표대회 논문집 Vol.22 No.1
When a metal sprayed film of several hundred μm on the concrete surface is possible to 80 dB of shielding effect electromagnetic waves (ElectroMagnetic Pulse, EMP). Therefore, in this study, as a way to secure EMP shielding performance by applying a metal spray coating showing excellent EMP shielding performance to a concrete structure, the metal spray welding efficiency and thin film adhesion performance according to the concrete spray direction and surface treatment method were evaluated. Metal sprayed efficieny according to the metal spraying direction and method was confirmed that the difference was insignificant by applying the roughening agent. However, the method of strengthening the concrete surface and applying the sealing agent show maximum adhesion strength of 3.98 MPa compared to other methods, and it is judged that this method can be utilized for the metal spraying method for concrete EMP shielding.
상대밀도를 고려한 시멘트 페이스트 압축 강도에 관한 실험적 연구
장종민 ( Jang Jong-min ),장현오 ( Jang Hyun-o ),이한승 ( Lee Han-seun ) 한국건축시공학회 2017 한국건축시공학회 학술발표대회 논문집 Vol.17 No.1
In In this study, we measured the relative density and the compressive strength in order to select the appropriate W/B for the ultra-high strength concrete development. If W/B is lowered than the W/B of highest relative density, it was confirmed that the strength is lowered. However, if water is increased than the W/B, the relative density is decreased compressive strength was similar. The selection of the W/B of the lower than the highest relative density is not appropriate. Appropriate W/B is selected to be more than the maximum relative density of W/B. This was confirmed for TG-DTA.
다중 LMA 환경을 고려한 Proxy Mobile IP 기반의 향상된 경로 최적화 방안
장종민(Jong-Min Jang),서원경(Won-Kyeong Seo),최재인(Jea-In Choi),조유제(You-Ze Cho) 한국통신학회 2011 韓國通信學會論文誌 Vol.36 No.1
IETF Proxy Mobile IPv6는 이동 단말의 이동성을 지원하기 위한 망 기반 이동성 관리 기술이다. PMIPv6는 Mobile Access Gateway 와 Local Mobility Anchor 사이의 터널을 형성하고 항상 패킷이 Local Mobility Anchor를 통하여 전달되도록 설계하여, Local Mobility Anchor 병목현상 및 종단간 지연이 증가하는 문제점이 있다. 이러한 문제점을 해결하기 위해 경로 최적화 수행 가능 감지, 경로 최적화 절차 등의 많은 연구가 진행되고 있으나 추가적인 시그널링으로 인한 오버헤드가 증가하고 다중 Local Mobility Anchor 환경에 적용하기에 어려움이 있다. 따라서 본 논문에서는 다중 Local Mobility Anchor 환경을 고려한 PMIPv6 기반의 향상된 경로 최적화 방안을 제안하였다. PMIPv6 도메인 내 모든 Local Mobility Anchor의 정보를 Mobile Access Gateway가 유지하도록 하여 신속하게 경로 최적화를 수행하도록 하였으며, Local Mobility Anchor에 경로 최적화 상태 정보를 저장하여 핸드오버 이후에도 신속한 경로 최적화를 지원하도록 하였다. 또한 핸드오버 시에 상대 노드의 Mobile Access Gateway에 버퍼링 기능을 추가하여 경로 최적화를 수행하는 동안의 패킷 순서화 문제를 해결하였다. 제안된 방안의 성능은 OPNET 시뮬레이터를 이용하여 분석하였으며, 이를 통해 제안 방안의 우수성을 검증하였다. The Proxy Mobile IPv6 is a network-based localized mobility management protocol. In the PMIPv6, Mobile Nodes are topologically anchored at a Local Mobility Anchor, which forwards all data packets for registered Mobile Nodes. Since all data packets destined for the Mobile Nodes always traverse the Mobile Nodes's Local Mobility Anchor, the LMA might be bottleneck and the end-to-end delay are increased. Therefore, in this paper, we proposed an enhanced Route Optimization scheme in Multiple Local Mobility Anchors environment. In order to rapidly detect Route Optimization, we designed Domain Information Table in Mobility Access Gateway. Furthermore, we use Correspondent Binding Cache in Local Mobility Anchor to maintain Route Optimization information during Mobile Nodes's handover. To solve packet loss and reodering problems during handover, we propose a new buffering and forwarding scheme.