http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 장정범 ( Jeong Beom Jang ) (검색결과 2 건)
- 무료
- 기관 내 무료
- 유료
-
에폭시 개질 한 다관능 아크릴레이트를 포함하는 충격 저항성이 향상된 불포화폴리에스터 SMC (Sheet Molding Compound) 소재제조 및 그의 물성연구
장정범 ( Jeong Beom Jang ),김태희 ( Taehee Kim ),김혜진 ( Hye Jin Kim ),이원주 ( Wonjoo Lee ),서봉국 ( Bongkuk Seo ),김용성 ( Yongsung Kim ),김창윤 ( Changyoon Kim ),임충선 ( Choong-sun Lim ) 한국접착및계면학회 2020 접착 및 계면 Vol.21 No.3
본 연구에서는 에폭시 수지를 개질 한 변성 아크릴레이트를 합성하였으며, 이를 기존의 유리섬유 복합소재에 사용하는 SMC 조성물에 5 phr - 15 phr을 첨가하여 SMC 소재를 제조하였다. SMC 프리프레그를 고온고압 (150 ℃, 10 bar)에서 컴프레션 몰딩방법으로 성형하여 유리섬유 복합소재를 제조하였으며, 제조된 복합소재를 가공하여 인장강도, 충격강도 등의 기계적 물성을 연구하였다. 실험결과 합성된 변성 아크릴레이트를 5 phr을 포함하는 복합소재가 합성 아크릴레이트를 포함하지 않는 binder 샘플보다 인장강도는 약 20%, 충격강도는 약 12% 향상함을 보였으며, 이는 합성 아크릴레이트가 폴리에스터와 반응할 수 있는 4개의 아크릴 기를 가짐으로써 가교반응을 강하게 하면서 기계적 강도가 향상됨을 확인하였다. In this study, epoxy-modified acrylate was synthesized. The synthesized acrylate was added to the composition for sheet molding compound (SMC) in the range of 5 phr to 15 phr. The prepared SMC prepreg was molded at high temperature and pressure to produce a glass fiber reinforced composite. Physical properties such as tensile and impact strength of the composite were measured, respectively. Experimental data show that the composite with 5 phr of synthesized acrylate has 20% improved tensile strength and 12% improved impact strength than that of the reference sample.
-
이정범,이재용,이사굉,장정렬,장익근,김진수,Lee, Jeong Beom,Lee, Jae Yong,Li, Si Hong,Jang, Jeong Ryeol,Jang, Ik Geun,Kim, Jin Soo 한국농공학회 2014 한국농공학회논문집 Vol.56 No.5
The objective of this research was to investigate concentration and load of nutrients such as total nitrogen (TN), nitrate nitrogen ($NO_3$-N) total phosphorous (TP), and phosphate phosphorous ($PO_4$-P) in a 23.4-ha paddy fields watershed with river water source. Water samples for irrigation water, drainage water, ponded water and groundwater were collected, and irrigation and drainage water were measured at 5~10 day intervals during normal days and at 2~6 hours intervals during three storm events. The amount of irrigation water in the study area was over 2,000 mm, which is almost identical to that in the area irrigated from a large reservoir but much more than that in the area irrigated from a pumping station. Mean flow-weighted concentrations of TN and TP in irrigation water were 2.8 and 0.15 mg/L, respectively, higher than those in the area irrigated from a large reservoir or a pumping station. The ratios of irrigation load to total inflow load for TN and TP were 88 %, and the ratios of surface outflow load to total outflow load for TN and TP were over 90 %, indicating that total nutrient load may be greatly affected by water management. The nutrient loads per area in the study area were estimated as TN 21.1 kg/ha and TP 1.1 kg/ha. Especially, the TP load per area in the study area was smaller than that in the area irrigated from a large reservoir or a pumping station. This may be because outflow load is not high likely due to sedimentation of particulate P and irrigation water load is high due to high TP concentration in irrigation water and high amount of irrigation water.
ScienceON
KISS연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
