http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
장재완(Jae-Wan Jang),김영석(Youngseok Kim),홍정우(Jungwoo Hong),맹승렬(Seung Ryoul Maeng),김진수(Jin-Soo Kim) 한국정보과학회 2003 한국정보과학회 학술발표논문집 Vol.30 No.1C
웹의 발전과 더불어 웹 캐시 시스템의 중요성이 증대되면서, 다양한 구조의 웹 캐시 시스템이 제안되고 있으며 최근에는 Squirrel 과 같은 P2P 방식을 이용한 웹 캐시 시스템도 출현하였다. 본 논문에서는 Squirrel과 같은 일반적인 P2P 웹 캐시를 서브넷에 국한시킨 경우의 P2P 웹 캐시의 효용성을 분석한다. 이를 위하여, P2P 웹 캐시를 이용하는 사용자들의 웹 접근 성향을 웹 로그 트레이스로 시뮬레이션 하여, P2P 웹 캐시가 서브넷에서도 웹 캐시로서의 효용성이 있음을 보인다. 또한 현실적인 접근법으로써 중앙 프락시 서버를 두고 P2P 웹 캐시를 사용하는 경우에도 성능상의 효용성이 있음을 기술한다.
동적 서비스 설치 기능 구현을 통한 그리드상의 동적 자원 제공 시스템 개발
변은규(Eun-kyu Byun),장재완(Jae-wan Jang),김진수(Jin-soo Kim) 한국정보과학회 2005 한국정보과학회 학술발표논문집 Vol.32 No.2
그리드 컴퓨팅 기술은 이용하여 이종의 분산 자원들을 묶어서 사용할 수 있게 해 준다. 최근의 그리드는 이기종 자원간의 상호 호환성 증대를 위하여 웹 서비스 기술을 도입하여, OGSA와 WSFR 표준을 정의하였다. 그에 따라 그리드 자원과 그 위에서 동작하는 작업들은 웹 서비스의 형태로 구현되고 관리된다. Globus Toolkit은 이 표준들을 구현한 미들웨어로 그리드 연구에서 가장 널리 활용되고 있다. 서비스가 자원을 효율적으로 사용하면서 서비스 성능을 유지하기 위해서는 서비스가 원하는 시점에 원하는 양의 자원을 제공 받을 수 있어야 한다. 이를 위해서 유휴자원을 찾는 기능과 동적으로 자원에 서비스를 설치하는 기능이 반드시 필요하다. 그러나 기존의 Globus Toolkit은 이런 기능을 제공하지 않는다. 따라서, 본 연구에서는 Globus Toolkit에 동적 서비스 설치 기능을 추가하고 그것을 관리할 수 있는 도어 서비스를 구현하여, 동적 자원 제공 기능이 가능하도록 하였다.
김영석(Young-Seok Kim),장재완(Jae-Wan Jang),유정록(Jung-Lok Yu),함재균(Jae-Gyoon Hahm),맹승렬(Seung-Ryoul Maeng),이준원(Joon-Won Lee) 한국정보과학회 2003 한국정보과학회 학술발표논문집 Vol.30 No.1A
그리드 시스템이란 네트워크로 연결된 자원들을 통합적으로 관리하여 자원의 효율적인 사용을 지원하기 위한 기반 구조이다. 이러한 환경에서는 응용프로그램의 요구사항을 만족시키기 위해 다중의 자원들을 동시에 할당할 필요성이 자주 발생한다. 본 논문에서는 효율적인 그리드 자원 동시 할당자인 KGB(KAIST GLOBUS) DUROC(Dynamically Updated Resource Online Coallocator)을 구현하였다. KGB DUROC은 그리드 미들웨어의 실질적인 표준인 GLOBUS의 DUROC을 GLOBUS IO 라이브러리를 사용하여 소스 코드(source code)수준에서의 호환성을 유지하면서 수정, 개선한 것이다. KGB DUROC 과 GLOBUS DU-ROC 각각에 마이크로벤치마크를 수행시켜 성능을 분석, 평가하였다.
장재완 東亞大學校 大學院 2000 大學院論文集 Vol.25 No.-
In spite of various good point of Electronic Commerce, consumers still have much doubt in it. The main cause for it was quality of goods and information. Therefore to solve these problems, it is necessary to introduce wider range of Quality Guarantee, thus drawing out potential demand to facilitate Electronic Commerce.
상악 중절치 후방 이동시의 이동양상에 관한 유한요소법적 연구
손병화,장재완 대한치과교정학회 1991 대한치과교정학회지 Vol.21 No.3
The retraction of anterior teeth is one of the fundamental methods in orthodontic treatment and a proper position and angulation of anterior teeth after the retraction are very important for esthetics, stability, and function of teeth. In this research we analyzed, by Finite Element Method, the stress distribution on the periodontal ligament according to the variation of force and moment applied on the crown and predict the pattern of movement of maxillary central incisor. At the same time, the amount of force and moment caused by activation of the loop which was used for retraction of maxillary central incisor was analyzed by Finite Element Method. We observed the following results: 1)We could control the stress distribution on the periodontal ligament by proper moment/force ratio on maxillary right central incisor and predict the pattern of movement of maxillary right central incisor. 2)The amount of stress on the periodontal ligament as well as the moment/force ratio demanded by each pattern of movement increased as the destruction of alveolar bone was worse. 3)The moment/force ratio demanded by each pattern of movement decreased as the angle between the maxillary central incisor and occlusal plane decreased. 4)THe force with the open loop was shown to be large compared to that with the closed loop. Also, the force with the helix decreased by 30% compared to that without the helix. 5)Under the same conditions we observed a larger moment/force ratio when the open loop and/or the helix were used.