http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
자전연소합성법에 의해 제조된 BaTiO<sub>3</sub> 분말의 소결특성에 미치는 첨가제의 영향
임성재,신창윤,원형일,원창환,Lim Sung-Jae,Shin Chang-Yun,Won Hyung-Il,Won Chang-Whan 한국분말야금학회 2006 한국분말재료학회지 (KPMI) Vol.13 No.2
In this study, high purity fine $BaTiO_3$ powders were prepared by SHS (Self-propagating High-temperature Synthesis). We would examinate the study of sintering properties and characteristics as a function of temperature with various additives (binder, sintering agent). In separately binder addition, the green and sintered density of specimen were increased as binder content increases. The increased porosity resulted in fine grain size due to the inhibition of grain boundary moving. The $Al_{2}O_{3},\;TiO_{2}$ and MgO playa role of increasing dielectric constants at room temperature. These values were decreased at curie temperature. In case of $SiO_2$, the Curie temperature was decreased. In this study, a high dielectric ceramic capacitor material with temperature stability was synthesized by using various additives.
초등수학영재학급에서 교수자의 지도 목표와 학습자의 학습 목표 인식 간극 분석
임성재,송상헌 한국초등수학교육학회 2015 한국초등수학교육학회지 Vol.19 No.1
본 연구는 영재학급에서 수업 중 교사가 강조하는 지도 목표와 학생들이 인식하는 학습 목표 도달 정도의 차이를 분석해 봄으로써 영재학급에서의 학습 목표 제시 방식을 개선하는 데 목적이 있다. 이를 위해 초등학교 6학년 2개 학급(각 20명씩 총 40명) 학생들의 활동지를 양적으로 분석하였으며, 각 학급 내 성취 수준이 상, 중, 하위권에서 각 1명씩을 대상으로 수업 중 연구자 참여 관찰과 수업 후 개별 면담을 통해 그들의 학습 목표 인식 사례를 질적으로 분석하였다. 학습 목표는 내용면, 과정면, 태도면에서 각각의 하위 요소별로 교사가 사전에 기술해 놓은 것에 대해 교사 자신이 강조한 정도와 학생이 인식한 정도의 간극을 항목별로 차이를 수치화하여 비교하였다. 연구 결과 영재학급 학생들은 내용면보다는 상대적으로 과정면에서 학습 목표에 대한 인식이 낮음을 알 수 있었는데, 전반적으로 연역적 사고, 유추적 사고, 발전적 사고에 있어서 교사의 강조 정도와 인식 정도의 차이를 보였고 특히 유추적 사고에서 학습 목표에 대한 그 인식 정도가 가장 큰 차이를 보였다. 이를 통해 얻게 된 몇 가지 교육적 시사점을 제시하였다. This study investigated the analysis of examples that gifted students’ realizing the learning objectives through teaching method of the teacher’s questions and advice. 6 gifted students were selected to be examined with ‘magic square’ in class. The teacher emphasized the learning objectives without directly proposing. Whereas, the teacher proposed the learning objectives by questioning and giving advice to students. After the class, the 6 gifted students were surveyed to answer about realizing the learning objectives of mathematics (about contents, process, and attitude in mathematics learning objectives). Mathematical gifted students thought about the process that consists of deductive thinking, analogic thinking, extensive thinking, creative thinking, and critical thinking. But, they underestimated the deductive thinking. So the teacher should develop the questions and advice to teach the mathematical gifted students according to the level of them. The high level of mathematical gifted students were able to realize the value and the importance of the mathematical attitude, while the low level of mathematical gifted students were able to realize them little. For this reason, the teacher should apprehend the level of the students, and propose materials and contents of the learning. The teacher should also make the gifted students realize value, will, and personality of mathematics by questions and advice. Lastly, like it is needed in general classes, there should be a constant researches and improvements about questions of the teacher that are appropriate to each student’s learning abilities and cognition ability.
임성재,이지형,구본기,이길행,Lim, S.J.,Lee, J.H.,Koo, B.K.,Lee, K.H. 한국스마트미디어학회 2012 스마트미디어저널 Vol.1 No.1
가상현실, 게임, 애니메이션 등 컴퓨터 그래픽스(Computer Graphics)에 기반한 응용의 시작은 3D 모델링으로부터 시작된다. 3D 모델링 및 변형 기술은 초기 3D 기본원소들의 조합에서 시작되어 최근 사실적이며 실사에 가까운 모델링 및 변형 기술에 이르기까지 그 역사가 깊다. 본 논문에서는 3D 휴먼 모델링 및 변형 기술의 동향에 대해서 살펴보고자 한다. Computer graphics applications such as virtual reality, games, animation begin from 3D modeling. The technology of 3D modeling and deformation has become an active research field in the past few decades from the combination of basic 3D primitives to the realistic modeling and deformation algorithm. In this paper, we introduce recent trends in 3D human modeling and deformation technology.
영상레이다 원시데이터를 이용한 BAQ(Block Adaptive Quantization) 최적화 방법
임성재,이현익,김세영,남창호,Lim, Sungjae,Lee, Hyonik,Kim, Seyoung,Nam, Changho 한국군사과학기술학회 2017 한국군사과학기술학회지 Vol.20 No.2
The size of raw data has dramatically increased due to the recent trend of Synthetic Aperture Radar(SAR) development plans for high resolution and high definition image acquisition. The large raw data has an impact on satellite operability due to the limitations of storage and transmission capacity. To improve the SAR operability, the SAR raw data shall be compressed before transmission to the ground station. The Block Adaptive Quantization (BAQ) algorithm is one of the data compression algorithm and has been used for a long time in the spaceborne SAR system. In this paper, an optimization method of BAQ threshold table is introduced using real SAR raw data to prevent the degradation of signal quality caused by data compression. In this manner, a new variation estimation strategy and a new threshold method for block type decision are introduced.
임성재,이태근,장진녕,고예은,이승대 한국전자통신학회 2022 한국전자통신학회 논문지 Vol.17 No.1
In this paper we present the system we produced to help workers at logistic centers and prevent accidents, in which they could get hurt. As a base we use the main control device, named Arduino uno, which measures the weight by using load cells. When operating with the system, by placing object on it, the system measures the weight of the object and keeps the highest point at the same height by lowering its board. This improves the convenience while placing and removing objects from the board. If the weight of the placed object is exceeding the set value the board will also lower itself to secure the safety. By using a line tracer system the objects are being moved only on a set route with the goal to make it even more comfortable to use.
임성재 한국의료복지시설학회 2000 의료·복지 건축 Vol.6 No.11
The digital network system is one of the most important features in the resent hospital buildings. This study is to lay out a guideline of architectural planning according to the hospitals with digital network system. First, this study develops the concept of hospital building digital network system and reports the survey results of domestic general hospitals for this matter Required spares by digital network system in general hospital are classified into two categories. One is equipment room, main equipment room and a telecommunication closet, to accommodate network facilities. The other is the spaces related with medical information, medical archives and the department of radiology, because digital network system makes a change the form and use of information. In result, this study proposes models for each equipment room and raises the possibility of size change of information - spaces.
임성재,정용연,호요성 대한전자공학회 2006 電子工學會論文誌-SP (Signal processing) Vol.43 No.6
Statistical models of shape variability based on active shape models (ASMs) have been successfully utilized to perform segmentation and recognition tasks in two-dimensional (2D) images. Three-dimensional (3D) model-based approaches are more promising than 2D approaches since they can bring in more realistic shape constraints for recognizing and delineating the object boundary. For 3D model-based approaches, however, building the 3D shape model from a training set of segmented instances of an object is a major challenge and currently it remains an open problem. In building the 3D shape model, one essential step is to generate a point distribution model (PDM). Corresponding landmarks must be selected in all training shapes for generating PDM, and manual determination of landmark correspondences is very time-consuming, tedious, and error-prone. In this paper, we propose a novel automatic method for generating 3D statistical shape models. Given a set of training 3D shapes, we generate a 3D model by 1) building the mean shape from the distance transform of the training shapes, 2) utilizing a tetrahedron method for automatically selecting landmarks on the mean shape, and 3) subsequently propagating these landmarks to each training shape via a distance labeling method. In this paper, we investigate the accuracy and compactness of the 3D model for the human liver built from 50 segmented individual CT data sets. The proposed method is very general without such assumptions and can be applied to other data sets. 통계적 데이터를 이용하여 모양 변이가 가능한 능동모양모델(Active Shape Model, ASM)은 이차원 영상의 분할 및 인식에 성공적으로 사용되고 있다. 삼차원 모델 기반 기법은 객체 경계의 인식 및 묘사(delineating)를 위한 더욱 현실적인 모양 억제력(constraint)을 갖는다는 점에서 이차원 모델 기반 기법에 비해 좋은 결과를 가져온다. 그러나 삼차원 모델 기반 기법을 위해서는 분할된 객체들의 집합인 훈련(training) 데이터로부터 삼차원 모양모델을 생성하는 것이 가장 중요하고 필수적인 단계이며, 현재까지도 커다란 도전 과제로 남아있다. 삼차원 모양모델 생성에서 가장 중요한 단계는 포인트 분산모델(PDM)을 생성하는 것이다. PDM 생성을 위해서는 상응하는 특징점(landmark)을 모든 훈련 데이터의 대응하는 위치에서 선택해야 한다. 그러나 현재까지 많이 사용되는 특징점의 수동 선택 기법은 시간이 많이 소비되며, 많은 오류를 발생한다. 본 논문에서는 삼차원 통계적 모양모델의 생성을 위한 새로운 자동 기법을 제안한다. 주어진 삼차원 훈련 모양 데이터에서, 삼차원 모델은 다음 방법에 의해 생성된다. 1) 훈련 모양 데이터의 거리 변환(distance transform)으로부터 평균(mean) 모양 생성, 2) 평균 모양에서 자동적으로 특징점을 선택하기 위한 사면체(tetrahedron) 기법 사용, 3) 거리 표식(distance labeling) 기법을 통한 각 훈련 모양에서 특징점의 전파(propagating). 본 논문에서는 50명의 복부 CT 영상으로부터 간(liver)을 위한 삼차원 모델을 생성하고, 평가를 위해 정확성과 밀집도(compactness)를 조사한다. 기존의 삼차원 모델 생성 기법들은 객체의 모양과 기하학적 및 위상학적으로 심각한 제한을 갖지만, 본 논문에서 제안한 기법은 위와 같은 제한 없이 어느 데이터 집합에도 적용할 수 있다.