http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임상돈,정영득,김종래 대한안전경영과학회 2014 대한안전경영과학회지 Vol.16 No.3
Most systems used in industrial sites, actually have non-linearity and uncertainty. Therefore there are a lot of difficulties in evaluating conditions of these systems. Generally, the quantitative analysis and expression are found hard because the general public cannot easily make an accurate interpretation on the systems. Thus development of a system that utilizes an expertise from skilled analysts is required. In this research, a real-time sensor signal conditioning system and Fuzzy-expert system have been separately set up into an inference algorithm. So that it ensures a fast, accurate, objective and quantitative operational condition value provided to the manager. Therefore, FE_AFCDM is suggested in this literature, as an effective system for diagnosing the problems related to the air compressor. It can quantify the uncertain and absurd condition to operate the air compressor facilities safely and financially.
임상돈,장승민 한국심리학회 2017 한국심리학회지 일반 Vol.36 No.4
Parallel analysis is a method of estimating the number of factors by comparing the eigenvalues of sample data with the eigenvalues of random data. This method is considered to be theoretically more valid and empirically more accurate in estimating the number of factors than other methods, such as Kaiser method and scree test, that estimate the number of factors based on the eigenvalues. However, several criticisms have been raised about the validity of the rationale for parallel analysis and various modifications have been proposed. There have also been concerns about the conditions under which parallel analysis shows relatively low accuracy. The current study examined the rationale and limitations of the use of eigenvalues and parallel analysis to estimate the number of factors, and based on this, we specified the conditions under which the accuracy of parallel analysis may be low. We also examined, through a simulation, the effects of various factors that may affect the accuracy of parallel analysis and confirmed the conditions where cautions are needed when applying parallel analysis. The results of the simulation show that the accuracy of estimating the number of factors in the parallel analysis is greatly influenced by the size of factor correlations, the magnitude of factor loadings, the number of factors, and the number of variables per factor. In addition, we confirmed that the accuracy of the parallel analysis is significantly lower when a factor model includes a weak factor with low factor loadings. Overall, the accuracy of the parallel analysis for the reduced correlation matrix (PA-PAF) was higher than the parallel analysis for the correlation matrix (PA-PCA), which in particular, PA-PAF showed high accuracy when factor correlations were high, and PA-PCA showed high accuracy when factor correlations were low. Based on the results of the simulation analyses, we proposed sample sizes required for parallel analysis to provide accuracy of 90% or higher under conditions with different levels of factor correlation, factor loading, and the number of factors. 평행분석은 표본 자료의 고윳값과 무선 자료의 고윳값을 비교하여 요인의 개수를 추정하는 방법이다. 이 방법은 고윳값에 근거하여 요인의 개수를 추정하는 다른 절차들(카이저 방법, 스크리 검사)보다 이론적으로 더 타당한 근거를 갖고 있고 경험적으로도 요인의 개수를 더 정확히 추정하는 것으로 평가 받는다. 그러나 평행분석의 이론적 근거의 타당성에 대해서도 여러 비판이 제기되어 왔고 이에 따른 다양한 수정 절차들도 제안되었다. 또한 평행분석이 상대적으로 낮은 정확성을 나타내는 조건들에 대한 우려도 있어 왔다. 본 연구는 고윳값과 평행분석이 요인의 개수를 추정하는 데 사용될 수 있는 이론적 근거와 한계를 검토하고 이를 바탕으로 평행분석의 정확성이 낮게 나타날 수 있는 조건들을 구체화하였다. 또한 모의실험을 통해 평행분석의 정확성에 영향을 줄 수 있는 다양한 요인들의 효과를 검토하고 평행분석의 사용에 주의를 요하는 조건들을 확인하였다. 모의실험의 결과는 평행분석의 요인수 추정 정확률이 요인상관의 크기, 요인부하량의 크기, 요인의 개수, 요인당 변수의 개수에 따라 크게 영향을 받으며 정확률이 낮은 조건에서 표본크기의 영향이 매우 크다는 것을 보였다. 또한 요인부하량이 낮은 변수들로 구성된 약한 요인이 포함된 경우 요인수 추정의 정확률이 크게 낮아짐을 확인하였다. 전반적으로 상관행렬에 대한 평행분석(PA-PCA)보다 축소상관행렬에 대한 평행분석(PA-PAF)의 정확률이 높았으며 특히 요인상관이 높은 경우에는 PA-PAF가, 요인상관이 낮은 경우에는 PA-PCA가 높은 정확률을 보이는 경향이 확인되었다. 마지막으로 모의실험의 결과를 기초로 요인상관의 크기, 요인부하량의 크기, 요인의 개수의 조합으로 구성되는 다양한 조건에서 평행분석이 90% 이상의 정확률을 제공하기 위해 요구되는 표본크기를 제안하였다.