http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
혼합 비이온계면활성제의 조성에 따른 O/W 에멀젼의 유동특성 및 안정성 (Ⅱ) 고급 알코올의 첨가에 따른 O/W 에멀젼의 상거동 및 유동특성
이호식,김점식 ( Ho Sik Lee,Jum Sik Kim ) 한국공업화학회 1993 공업화학 Vol.4 No.2
Glycerol monostearate/POE(100) monostearate 혼합비이온계면활성제를 유화제로 사용한 O/W 에멀젼에 고급알코올인 1-hexadecanol/1-octadecanol 혼합물을 보조유화제로 첨가하여, 상거동 및 유동특성을 관찰하였다. 고급알코올의 결정구조가 변화하는 전이점은 1-hexadecanol/1-octadecanol의 조성에 따라 서로 다른 값을 가지며, 2/1의 비율에서 최저값을 나타내었다. 고급알코올의 첨가에 따라 에멀젼 내에는 액정이 형성되며, 이들로 인하여 에멀젼 입자간 응집체인 2차입자가 형성되어 에멀젼의 점성도가 증가하였다. 에멀젼계의 온도가 고급알코올의 전이점 이하로 저하되면, 고급알코올의 지방족 사슬의 운동성이 제한된 겔구조가 형성되어 점성도가 증가하였으나 시간이 경과함에 따라 액정이 사라지고 에멀젼의 점성도도 저하되었다. 용액 내에 분산되는 양(본 실험에서는 2wt%) 이상의 고급알코올을 첨가해야 에멀젼 내에서 고급 알코을/계면활성제/물이 액정을 형성하였으며, 과량(본 실험에서는 10wt%)의 고급알코올을 사용하면 2차입자가 형성되지 않았다. Long chain alcohols, the mixtures of 1-hexadeeanol/1-octadecanol, were used as cosurfactants for O/W emulsion prepared with glycerol monostearate/POE(100) monostearate mixed nonionic surfactants, and the phase behavior and flow properties of O/W emulsions were observed. The transition temperature of long chain alcohol was varied with the composition of 1-hexadecanol/1-octadecanol and had the lowest value when the mixed ratio of 1-hexadecanol/1-octadecanol was 2/1. The liquid crystalline phase was formed as the addition of long chain alcohol and the secondry droplet, the flocculate of the emulsion particles, was made, and thus the viscostiy of the emulsion was increased. When the temperature of emulsion system was under the transition temperature of long chain alcohol, the mobility of hydrocarbon group of long chain alcohol was restricted, and thus gel structure was formed and the viscosity of the the O/W emulsion was increased, but along with the time, the liquid crystalline phase was disappeared and the viscosity of emulsion was decreased. Long chain alcohol/nonionic surfactants/water formed the liquid crystalline phase when the long chain alcohol was added above the saturation point of solution(2 wt% in this experiment), and the secondry droplet didn`t formed when the long chain alcohol was added more than a certain amount(10 wt% in this experiment).
CuPc/Au 계면에서의 온도 변화에 따른 표면전위 특성
이호식,박용필,Lee, Ho-Shik,Park, Yong-Pil 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.10
Organic field-effect transistors (OFETs) are of interest for use in widely area electronic applications. We fabricated a copper phthalocyanine (CuPc) based field-effect transistor with different metal electrode. So we need the effect of the substituent group attached to the phthalocyanine on the surface potential was investigated by Kelvin probe method with varying temperature of the substrate. We were obtained the positive shift of the surface potential for CuPc thin film. We observed the electron displacement at the interface between Au electrode and CuPc layer and we were confirmed by the surface potential measurement.
의용 소자로의 응용을 위한 생체 지질막의 수면상에서의 전기적 현상 특성 연구
이호식,강현욱,장경욱,권영수,김태완,이원재,Lee, Ho-Shik,Kang, Hyen-Wook,Jang, Kyung-Uk,Kwon, Young-Soo,Kim, Tae-Wan,Iwamoto, M.,Lee, Won-Jae 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.11
Monolayers of lipids on a water surface have attracted much interest as models of biological membranes, but also as precursors of multilayer systems promising many technical applications. They exhibit very interesting physico-chemical properties as two-dimensional and interfacial systems. Until now, many potential methodologies have been developed in order to gain a better understanding of the relationship between the structure and function of the monolayers.
Langmuir-Blodgett(LB) 유기 초박막의 열자격 변위 전류에 관한 연구
이호식,이원재,김태완,강도열,M. lwamoto 한국전기전자재료학회 1998 전기전자재료학회논문지 Vol.11 No.8
This paper describes athermally stimulated displacement current (TSDC) of arachidic acid(AA) and polyamic acid alkylamine salts(PAAS) Langmuir-Blodgett(LB) films, which is a precursor of polyimide(PI). The TSDC measurements of AA LB film were performed from temperature to about 11$0^{\circ}C$ at a rate of 0.2$^{\circ}C$/s inside a vacuum chamber for a reference. And the TSDC measurements PAAS LB film were performed from room temperature to about 25$0^{\circ}C$ and temperature was increased at the same rate as that of AA LB film. They show that there are TSDC peaks at about 7$0^{\circ}C$ in the arachidic acid LB films, and at about 7$0^{\circ}C$ and 16$0^{\circ}C$ in the PAAs LB films. Results of these measurements indicate the one small peak at 7$0^{\circ}C$ is resulted from a softening of the alkyl group and the large peak at 16$0^{\circ}C$ is possibly due to dipole of C-O group in the PASS molecule. We have calculated the vertical component of the AA and PAAs L film out of the TSDC curves. It shows that the dipole moment of the AA LB film is about 70-mD at 7$0^{\circ}C$. And the dipole moment of PAAS LB film is about 040mD at 7$0^{\circ}C$ and about 200mD at 16$0^{\circ}C$ in the first measurement of TSDC. In the second measurement of TSDC of PASS LB film after cooling down to room temperature, the TSDC peaks are almost disappeared.
이호식,이상환 한국재난정보학회 2013 한국재난정보학회 논문집 Vol.9 No.2
본 연구는 비점오염원 저감시설 중 침투시설의 유지관리에 관한 연구로서, 시설지내 여재의 투수계수 변화에 의한 침투율의 산정과 시설지로 유입되는 강우유출수의 저감효율을 통한 치환주기를 산정함과 동시에 시설지내 퇴적토 준설 주기를 산정하여 향후 시설의 효율과 성능을 향상시키기 위해 수행되었다. 현장투수시험과 실내투수시험은 각각 치환 전․후, 치환 후 4개월경과 후로 3회씩 총 9회 수행하였다. 저감효율은 2006년부터 2011년까지 TSS, BOD, CODmn, T-N, T-P의 각 항목별로 5년간 효율 변화가 검토되었다. 치환직후의 투수계수가 1.07×10-3(cm/s), 1년 경과후의 투수계수가 0.88×10-3(cm/s), 5년 경과후의 투수계수가 0.3×10-3(cm/s)으로 계산되었으며, 그에 따른 침투수량 또한 줄어드는 것으로 나타났다. 저감효율의 경우 전체적으로 효율이 낮아지는 추세를 보였으나 기존의 기대효율인 BOD 40%, SS 76%, T-N 39%, T-P 53%보다 효율이 높게 나타나는 것으로 나타났다. 따라서 최소한도인 3.61×10-4(cm/s)의 침투계수보다 5년이 지난 현재 시점의 침투계수가 높고 2010년 7월부터 2011년 7월까지 1년 동안 준설을 실시하지 않았음에도 불구하고 처리효율에 있어서 큰 차이를 보이지 않는 점을 고려 할 때 치환주기는 최소 5년 이상, 준설주기는 3개월에서 최대 1년 이상인 것으로 검토되었다.
Glycidyl Ether Macromonomer의 리빙 음이온 중합 Living
이호식,류상욱 한국공업화학회 2014 한국공업화학회 연구논문 초록집 Vol.2014 No.1
본 연구에서는 poly(ethylene glycol)methyl ether(PEGME)와 epichlorohydrin(ECH)의 williamson 반응을 이용하여 40°C, 1.5시간의 반응 조건으로 다양한 분자량의 poly(ethylene glycol)glycidyl ether(PEGGE)를 합성하였다. 합성된 macromonomer의 음이온 중합은 개시제로 diphenylmethyl potassium(DPM-K), 용매로 THF를 사용하여 50°C에서 3일간 고진공 유리장치에서 진행되었다. 블록공중합체를 위하여 macromonomer를 중합한 후 propylene oxide(PO)를 두 번째 단량체로 첨가하여 10일간 중합하였다. 합성된 고분자는 GPC, 1H-NMR, FT-IR 분석을 통해 분자량, 성분비, 작용기를 확인하였으며, 그 결과 블록공중합체가 성공적으로 합성되었음을 확인하였다. 또한 DSC를 통해 고분자 전해질의 열적변화가 Li이온의 농도에 따라 결정되는 것을 확인하였다. AC impedance 측정법을 이용하여 [EO]:[Li]의 비율, 온도에 따른 이온전도도를 관찰하였다.