http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Bluetooth 저전력용 고 효율 DC-DC converter 및 송신 단 연구
이철호 성균관대학교 일반대학원 2017 국내석사
본 논문에서는 저전력을 필요로 하는 IoT 기기 및 Bluetooth Low Energy Chip등에서 적용될 수 있는 저전력 Buck DC-DC Converter 및 Tx Power Amplifier를 제안한다. 본 논문에서는 저전력 조건에서 DC-DC Converter가 효율이 감소되는 문제와 그에 따른 해결책을 제시한다. 부하 전류에 따라 효율 감소의 주 원인이 되는 Conduction Loss, Switching Loss, Control Loss를 최소화 할 수 있도록 PWM, PFM, Retention Mode를 적용하여 넓은 부하전류 조건에서 효율 최적화 하였다. 또한 기존의 Zero Current Detector의 문제점을 개선한 Self-Tracking Zero Current Detector를 제안하여 전류소모를 줄이고, PVT variation에 의한 Zero Current Detecting 기능의 오차를 줄일 수 있다. 제안하는 Power Amplifier는 High Power 모드를 추가하여 출력 파워의 dynamic range를 늘렸고, FSK 시스템 상 Tx On/Off 시 발생하는 Spurious Emission 특성을 개선하기 위해 Digital Ramping Controller를 적용하였다. 또한, Rx 와 외부 Matching 소자를 공유하여 chip area를 최소화 한다. 본 논문에서 제안하는 Buck DC-DC Converter와 Power Amplifier는 65nm 공정에서 설계되었으며, BLE 통신에 쓰이는 IP에 적용 되었다.
土俗이미지를 통한 韓國人의 美意識 表現 硏究 : 本人의 作品을 中心으로
藝術은 인간에게 있어 가장 근본적이며 본질적인 表現欲求이다. 이것은 문명과 함께 기계적 양식이 대두되고, 세계의 인식이 다양하게 변모하면서 혼란을 초래하였다. 다시말해서 사고방식이 다양하게 변화하므로서 현대생활이 복잡해 졌고, 나아가 회화의 형식과 표현방식에 까지 파급되면서 많은 변화를 가져왔다. 그러한 복잡한 변화속에서 우리의 傳統, 우리의 文化등 「우리의 것」을 찾자는 경향이 사회전반에 고조되면서 미술분야에까지 부각되고 있다. 이것은 매우 바람직한 현상으로 생각되며, 이를 위한 올바른 방향이 설정되어야 할 것이다. 올바른 우리 것을 찾는 작업의 의의는 우리민족의 긍지와 자부심, 주체성을 확립하여 민족간의 유대를 강화하고 더불어서 우리나라를 외부 세계에 올바로 알리고 인식시키는 데 있다고 할 것이다. 따라서 본인의 작품에서는 우리민족의 정신적 토대가 되어온 문화사적 정서나 민속적인 맥락이 존재하고 있음과 함께 우리의 감성적 뿌리를 일궈온 민속적 특성중의 하나인 토속성을 토대로 역사적 소재나 변형된 상징적 매체와 색채를 통해서 토속성에 표출된 이미지를 중점적으로 표현함으로써 우리의 의식 밑바닥에 고여 있는 한국적 정서를 재인식시키고자 하는 시도이다. 그러므로 본 연구는 우리의 것을 시각화하는 연구중의 일환으로써 土俗的인 것에 대한 문제를 다루어 보면서 본인의 제작과정을 이해하기 위한 기본적 배경인 이론을 고찰하므로써 작품의 이해를 돕고자 하였다. Art refers to the need for expression as most fundamental and essential in human being. It has become confused as mechanized styles following civilization have been raised and global perceptions have changed. Specifically, various changes in ways of thinking and there by complicated modern life have penetrated into painting, varying its styles and expression ways much. Under the circumstances of the variation, however, a trend of 'Finding Belongings of Our Own' including our tradition and culture has extended throughout the society, finally reaching the field of art. This is seen as very desirable, whose right direction should be made. The task of finding the belongings has its significance in strengthening cohesion of this nation through establishment of the pride, self-conceit and subjectivity of the Korean people and making the nation well understood by the outside. Thus my work which reflects cultural historical sentiment and folkloristic connections as spiritual bases of the people attempts to recognize Korean sentiment underlying our consciousness anew by mainly expressing folk images with historical materials based on local cusloms, or using symbolic media and colors transformed. Consequently this study puts its purpose on helping understand my work by reviewing background theories basic to the work manufacture while considering folk-based matters in a effort to visualize belongings of our own.
선형희소솔버를 이용한 기계시스템 동역학의 파라메트릭 일반좌표 수식화
Efforts are being continued to implement multibody dynamics formulation easily and quickly. The parametric generalized coordinate is included in the constraint equation is proposed, to maintain the generality of the absolute coordinate, to compensate for complexity of the relative coordinate. In the proposed approach, the number of arithmetic operations for the Jacobians compared to the conventional and proposed approach, the dynamic analysis of a multibody slider-crank mechanism model is carried out to demonstrate the validity of the proposed formulation. As a result, due to the parametric generalized coordinate, the proposed approach had the advantage of reduced system calculation times, arithmetic operations and complexities for jacobian of constraint equation. Although the size of the system matrix is increased, due to Sparse Linear Solver, the simulation time of proposed method increased slightly than a conventional Cartesian coordinate approach. The Simplified jacobian facilitates more easy and rapid program development.
개의 골절 모델에서 내부고정을 위하여 동종 치밀골로 만든 골판의 효과
The metal materials have been used mostly in internal fixation of fractures, because high strength and a little tissue reactions to these. But these metal materials such as bone plate, screw and pin must be remove from the bone after union of fracture, because that much more rigid than bone may cause recurrent fracture. Currently, absorbable fixation materials such as ceramics decalcified cortical bone and several synthetic absorbable polymers were used in clinical practice. But these absorbable materials have some disadvantage such as early resorption, low strength and limited fixation ability. In this study, the effectiveness of internal fixation with bone plate using freeze-drying allograft cortical bone (FACB) investigated in fracture model in the dog, Freeze-dried cortical bone were known to have same strength as cortical bone raw bone, and function of resorption and induction of new bone formation. Fracture models were made by creating transverse defect of 2~3mm and 5~6mm length in diaphysis of ulna in 18 dogs. Out of 18 dogs, 12 dogs were applied bone plate made of FACB and metal bone screw, and 6 dogs were applied metal bone plate and bone screw made titanium alloy. After internal fixation, external fixation by Johnson and Johnson bandage were applied to defect fracture models of ulna. FACB bone plates were prepared by mechanically removing the of cancellous bone, bone marrow, periosteum and blood materials, and soaked with chloroform-methanol solution. For 7 days, freeze dried at -80℃, and stored at room temperature. All process of new bone formation, union of defect fracture, and resorption of bone plate were determinated with radiograph in every 2~4 weeks intervals for 135 weeks. Determination of biomechanical bone strength, bone density and histological observation in fracture region of ulna performed at 135 weeks after the fixing surgery. Fix of fracture by FACB bone plate was success in all cases, but two of 12 cases died from accident not related to this study at 13 weeks and 50 weeks after surgery. The metal bone screws in all cases were removed on 60 weeks postoperatively. The observation of bony callus in FACB bone plate were observed in 10 out of 12 dogs, and started from 5.7 weeks, and a complete union by 13 weeks in interval of defect fracture and between ulna and FACB bone plate was observed after fixing surgery. Resorption of FACB bone plate were observed in all cases started from 7 weeks and continued to 48 weeks. The resorption and new bone formation of FACB bone plate were observed concurrently to healing process of all cases. After complete bony callus of defect fracture, resorption of FACB bone plate was started from proximal and disital of cortical bone plate. In the large defect region of 5~6mm interval in fracture model, bony callus union not occurred in control groups were observed in fixation group of FACB bone plate. The remodeling was continued even after 135 weeks. The new bone formation or bony callus occurred around FACB bone plate and defect fracture increased stability of fracture by attachment to ulna. The bone strength and bone density in fracture region of ulna observed at 135 weeks after the fixing surgery were increased than normal ulna and control groups. In the histological observation of fracture region, FACB bone plate had replaced bony callus or new bone but dead bone or FACB not observed. The bone plate processing with FACB may be applied clinically by useful internal fixation materials to help healing by induction of new bone formation, and to eliminated the risk of a second surgery for the removal of the internal fixation material such as metal bone plate because the FACB bone plate occur delayed resorption. Specially, new bone inductivity of BMP in FACB bone plate may useful to healing of defect region in large defect fracture.
전자지방정부의 온라인 행정참여 수준 측정과 활성화방안에 관한 연구 : 인천광역시를 중심으로
민주주의 국가는 실체적 합리성을 지향하는 국민을 위한 정부 이상으로 국민의 참여를 중시하는 절차적 합리성을 추구한다. 참여정부의 전자정부 비전은 민주주의의 절차적 합리성을 구현하는 가장 중요한 조건으로 정부운영의 투명성과 책임성을 강조하고 있다. 따라서 참여정부의 전자정부 비전은 국민을 위한 행정 서비스의 구현과 이를 담보하기 위한 국정과정에의 국민적 참여를 대폭 신장하는 방향으로 열린 정부를 구축하는데 두고 있다고 할 수 있다. 참여정부는 전자정부 31대 로드맵을 설정하고 이 로드맵에 따라 추진된 전자정부는 중앙정부와 지방정부의 차원에서 모든 시민에게 제공된 전자정부의 시민의 온라인 행정참여 사이트가 정부의 강력한 노력으로 시민참여를 촉진시키는 결과를 가져오고 있다. 지금까지 정부가 추진한 다양한 정보화 사업이 상당한 성과를 거두고 있는 점과 정부의 정보화수준 또한 급격하게 향상된 점은 평가받고 있다. 그러나 지금까지 전자정부는 많은 예산을 투입하여 행정의 전 영역에 걸쳐 조직혁신을 이루고자 하였지만 그 성과는 아직 가시적으로 나타나지 않고 있다. 지금까지 정보기술에 대한 많은 투자에도 불구하고 결과가 기대와 달리 만족스럽지 못한 예가 많이 나타났던 점은 바로 기존의 업무처리방식을 그대로 고수한 채 업무내용만을 단순히 전산화했기 때문이며, 결과적으로 정보기술은 비효율적인 기존의 업무처리과정에서 단순히 업무처리의 속도만 높이는 데 사용된 것으로 볼 수 있다. 결국 전자정부를 추진하면서 행정의 효율성 향상·행정비용의 축소·조직인원의 감소·업무량의 감소·일하는 방식의 변화·행정참여의 증가를 논의하고 기대하였으나, 결과적으로 “생산성의 역설(productivity paradox)” 현상이 나타나고 있는 것이다 따라서 본 연구에서는 지금까지 이루어진 선행연구들을 검토한 후 전자정부를 통한 정부혁신·효율행정·투명행정·참여행정 실현과 이를 통해 진정한 국민주권을 실현하고 궁극적으로 전자민주주의의 실현을 가능하게 할 수 있는 시민의 온라인 행정참여 문제에 대하여, 전자지방정부 차원에서 인천광역시의 11개 시군구를 대상으로 시민의 온라인 행정참여가 얼마나 활성화 되고 있는가를 알아보기로 한다. 본 연구는 모두 6장으로 구성되어 있다. 제1장은 서론으로 연구의 목적과 연구의 범위 및 방법을 제시하였고, 제2장에서는 시민참여에 관한 이론적 논의와 온라인 행정참여에 대한 선행연구를 검토하였으며, 제3장은 전자지방정부 차원에서 시민의 온라인 행정참여가 얼마나 활성화되고 있는지 알아보기 위해 인천광역시의 11개 시군구를 대상으로 홈페이지의 행정참여 사이트 운영 현황을 살펴보았다. 제4장은 연구의 설계와 분석틀로서 본 연구를 수행하는데 필요한 분석 모형의 선정, 평가지표 및 평가방법에 대해 논의 하였으며, 제5장은 설문지 분석을 통한 수준측정을 계량화하여 온라인 행정참여의 단계별 성숙도를 평가한다. 마지막 제6장은 결론으로 연구의 내용을 요약하고 정책적 함의와 연구의 한계 및 향후 연구의 방향을 제시하였다. 본 연구는 전자지방정부 차원에서 시민의 온라인 행정참여가 얼마나 활성화 되고 있는가를 알아보기 위해 실증분석을 실시하였다. 첫째, 본 연구의 대상은 인천광역시의 11개 시군구에서 시민에게 제공하는 홈페이지 행정참여 사이트와 홈페이지를 통해 시민의 온라인 행정참여를 담당하고 있는 공무원 92명을 대상으로 진행하였다. 둘째, 본 연구의 방법은 ①인천광역시 11개 시군구의 홈페이지 운영 현황을 살펴보기 위해 지방행정기관이 시민에게 제공하는 홈페이지 행정참여 사이트를, 2007년 8월 7일부터 9월 30일까지 홈페이지를 직접 방문실사 하여 시민의 온라인 행정참여의 객관적 수준을 파악 하였다. ②인천광역시의 11개 시군구에서 시민에게 제공하는 홈페이지의 행정참여 사이트 업무 담당자를 대상으로, 2007년 10월 1일부터 10월 12일까지 설문조사를 실시하였고, 설문지 조사 후 2007년 10월 15일부터 10월 25일까지 담당자를 대상으로 인터뷰를 실시하였다. 연구의 결과를 보면, 인천광역시의 11개 지방행정기관의 전체적인 ‘시민의 온라인 행정참여의 단계별 성숙도’는 4 단계 중에서 두 번째 단계인 ‘진입 단계’에 도달해 있는 것으로 나타났다. e-거번넌스 관점에서 네 번째 단계에서의 정부와 시민간의 쌍방향적 커뮤니케이션이 활발하게 이루어져야 전자지방정부 차원에서 행정참여가 활성화 되고 있다고 볼 수 있다. 그러나 이번 실증연구를 통해서 본 결과 실제로는 활성화가 잘 안되고 있다는 것을 보여주고 있다. 따라서 이러한 연구 결과를 통해 전자지방정부의 활성화를 위한 정책적 함의를 제시할 수 있었다. 또한 본 연구는 인천광역시의 11개 시군구를 대상으로 연구를 진행함으로서 이러한 연구결과를 일반화 하는데 한계를 갖고 있으며, 향후 다른 지역을 대상으로 한 연구가 필요하다고 본다. The government of a democratic state has a serious consideration for popular participation. The e-government vision of participatory government is to pursue rational democratic procedures. Therefore, government emphasizes on management, accountability, and transparency. The participatory government initiated a total of 31 events on the road map for the preparing of e-government. According to the road map, e-government will boost online citizen participation. The information projects of the government have brought satisfactory results. The level of information in Korea has already reached to the highest. The government has provided a huge budget for e-government, still aiming for organizational reforms. Government has targeted improving administrative efficiency, reducing administrative costs, reducing personnel and work time needs, and changing methods of work through e-government. However the ultimate result has not been satisfactory. This study focuses on online citizen participation from the perspective of e-governance and e-democracy. Considering e-governance and e-democracy, this study selected Incheon Metropolitan City (IMC) as its research area for observing the online citizen participation. This study consists of six chapters. Beginning remarks, the goals and scope of this study are the main points of discussion in Chapter 1. Chapter 2 describes the theoretical discussion of online participation. The present status of online participation in local e-government in IMC is the central discussion of Chapter 3. The research methodology and frame of analysis is mentioned in Chapter 4. The data analysis of the empirical study is the principal discussion of Chapter 5. Finally, in Chapter 6, the findings of this study and some policy implications are described. This study found that the online citizen participation is not satisfactory in IMC. This research identified the maturity level of Incheon online participation are less than average. This research also suggests some solutions for improving the level of online citizen participation, too.
이철호 全南大學校 敎育大學院 1984 국내석사
Der Eintragungsanspruch ist ein privatliches Recht, daβ ein Eintragungsansteller von der Gegenseite es fordern kann, mit sich in der Eintragung mitzuwirken. Art.665 I ZGB. sagt, "Der Erwerbsgrund (d.h. Kausalgescha¨ft) gibt dem Erwerber gegen den Eigentu¨mer einen perso¨nlichen Anspruch auf Eintragung und bei Weigerung des Eigentu¨mers das Recht auf gerichtliche Zusprechung des Eigentums". Aber im KBGB setzt uber den Grund und das Wesen des Eintragungsanspruchs allgemein nicht fest. In Deutschland ist streitig ob der Anspruch auf Vollzug der Ein tragung aus der Einigung oder aus dem zugrunde liegenden Kausalgescha¨ft entspringt. Jedenfalls aber nach h.M. durch die Einigung bereits eine dingliche Anwar tschaftsrecht begru¨ndet, die auch u¨bertragbar ist, denn ohne aktives Handeln des Vera¨uβerers kann nun der Erwerber sein Recht erlangen, da er den Antrag auf seine Eintragung stellen kann. In Korea ist streitig ob der Eintragungsanspruch aus der Kausalgescha¨ft, oder aus der Einigung, oder aus dem dinglichen Anwart-schaftsrecht u.s.w. entspringt. Es ist unrichtig,daβ Eintragungsanspruch aus der Einigung entspringt, denn nach h.M. ist die Einigung keine Verpflichtungsgescha¨ft, sondern eine Erfu¨llungsgescha¨ft. In Korea kann das dingliche Anwartschaftsrecht, das in Deutschland in der Regel anerkannt wird, kaum zugestimmt werden. Also entscheiden wir dafu¨r,daβ der Eintragungsanspruch eine unvermischte Schuldforderung, die von dem Kausalgescha¨ft herruhrt, ist. U¨ber das Wesen des Eintragungsansprachs, haben wir Von dem materiellrechtl ichen Recht, schuldrechtlichen Anspruch, der Verja¨hrung, und den Kosten gemeint. Seit Festsetzung hat sich die Zusatzklausel § 10 I KBGB gegen die Institutsgarantie und Rechtsstellungsgarantie als Vermo¨gens-rechtsgarantie vergangen, daher hatte der koreanische Oberstegerichtshof diejenige zum Ver fassungsbruch verurteilen Sollen. Durch Untersuchung u¨ber die koreanische Oberstegerichtshofs Rechtsprechung, daβ sich der Eintragungsanspruch des besitzenden Immobilienserwerbers verja¨hrt nicht, finden wir den theoretischen Widerspruch trotz der Zwecksgerechtigkeit. Deshalb Ko¨nnen wir durch "exceptio rei venditae et traditae", das sich von dem ro¨mischen Recht herleitet und in Deutschland ohne die entgegengesetzte Meinung anerkannt wird, die deutlichere Erkla¨rung und die bessere Folge gewinnen.
탄소 다가이온 빔 인출을 위한 14.5 GHz 전자 사이클로트론 공명 이온원 특성 최적화
ECR 이온원은 발생되는 중이온 빔을 안정적으로 수송이 가능하며 사용자에 의해 운용 및 유지보수가 쉬운 장점을 가지고 있기 때문에 세계적으로 많이 연구되는 분야 중에 하나이다. 하지만, ECR 이온원은 제작을 한다고 해서 무조건적으로 고강도, 고순도 빔이 생성되는 것이 아니기 때문에 제작하는 기술뿐만 아니라 제작된 이온원에 의한 플라즈마 발생 및 다가이온 빔 인출 기술도 중요하기 때문에 이를 위한 ECR 설계 변수에 대한 특성을 분석하는 최적화 연구가 필요하다. 이에 따라 본 연구에서는 한국원자력연구원에 설치된 14.5 GHz ECR 이온원을 이용하여 이온원의 플라즈마에 영향을 줄 수 있는 변수에 대한 특성을 평가하고 결과로써 얻어진 실험 조건들을 이용하여 탄소 이온을 생성하여 전류를 측정함으로써 의료용 시설에 적용하기 위한 최적화 실험을 수행하였다. 이온원이 생성하는 플라즈마의 특성을 평가하기 위하여 NaI(Tl) 검출기를 이용하여 외부에서 X-ray 스펙트럼을 측정하였다. 플라즈마에서 생성되는 전자들의 움직임을 직접적으로 측정하기 어렵기 때문에 간접적으로 X-ray를 측정하여 플라즈마의 상태를 유추할 수 있는 전자 온도, 이온 제한 시간 등을 계산할 수 있다. 본 연구에서는 플라즈마 특성에 영향을 줄 수 있는 RF power, 기체 압력, Mirror-ratio, 그리고 최대 자장 변화에 대한 X-ray 스펙트럼을 측정하였다. 다양한 조건에서 실험을 수행한 결과, RF power와 솔레노이드 전류가 각각 500 W, 680/500/680A일 때 전자 온도가 최대 42.5 keV를 가지는 것을 확인하였다. 앞선 결과를 바탕으로 이온원이 생성하는 탄소 이온의 전류를 측정하기 위해 OPERA-3D 코드를 이용하여 탄소 이온 생성 전산모사를 수행하였다. 전산모사를 통해 이온원에서 탄소 이온이 생성되며 전류 분포를 간접적으로 계산하였다. 실험에서는 탄소 4가 이온의 전류를 최대한으로 높이기 위한 최적 조건을 도출하는 작업을 수행하였다. 이온 전류에 영향을 미치는 요소로는 기체 혼합 비율, Biased 디스크, 렌즈 등이 있다. 각각의 경우에 대한 조건을 변경하면서 인출 실험을 수행하였으며 결과로 얻은 최적 조건은 다음과 같다. 기체 혼합 비율로는 CO2/He이 1:8로 주입되며 압력이 5.04 x 10^(-7) mbar, 렌즈의 전압은 9.5 kV, Biased 디스크는 -150 V일 때 탄소 4가 이온이 최대 53 μA 인출되었다. 추가적으로 안정적으로 탄소 이온이 형성되는 것을 확인하기 위해 10분씩 총 5시간 동안 전류를 측정하였으며, 50 μA을 기준으로 8% 이내의 전류가 측정되어 안정적인 것을 확인하였다. 본 연구에서는 14.5 GHz ECR 이온원의 플라즈마 특성 평가를 위하여 외부에서 X-ray 측정 실험을 수행하여 플라즈마의 전자 온도가 최대값을 가지는 실험 조건을 구했다. 앞선 결과를 OPERA-3D 코드에 적용하여 탄소 이온의 전류 분포에 대한 전산모사를 수행하여 경향을 파악하였고, 탄소 이온 인출 실험을 통해 획득한 결과와 일치하는 것을 확인하였다. 앞선 실험 결과로 얻어진 이온원의 최적 조건은 향후 다른 이온원의 초기실험 조건을 위한 자료로써 이용할 수 있을 것이다.