http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이찬홍,강재훈 한국공작기계학회 2003 한국공작기계학회지 Vol.12 No.2
반도체산업 분야와 관련한 IC소자의 경우에 있어서는 더욱 초고집적화 되어지는 회로의 필요성에 대응하기 위하여 최근에 전세계적으로 0.13㎛의 패턴성형 기술이 개발되어 사용화되고 있으며 90nm 이하까지도 도달할수 있다는 가능성을 확인한 바 있다.
이찬홍 한국공작기계학회 2002 한국공작기계학회지 Vol.11 No.1
결론적으로 볼 때 Hard Turning기술은 대부분의 연삭가공분야에 적용이 가능하리라 생각하고 연삭공정을 탈락 시킴으로서 상당한 생산성을 올릴 것이라 예측된다. 특히나 연삭에 비해 자유곡면을 가공할 수 있고 미래의 기술인 환경친화적인 건식가공이 가능하다는데 큰 의미를 둘 수 있다.
Lead Frame용 캠 프레스의 이송장치 고속화 설계
이찬홍,임선종 한국공작기계학회 2007 한국공작기계학회 추계학술대회논문집 Vol.2007 No.-
The high speed feeding units, that are known generally weak points at the high speed semiconductor press are developed to increase feeding velocity up to 155%. The new designed feeding units has the performance, feeding velocity 170spm, positioning accuracy under 100㎛, decrease of link joint in feeding units, overload monitoring system with high sensitivity.
고속 주축베어링의 볼 접촉각 변동을 고려한 주축 설계공차
이찬홍,Lee, Chan-Hong 한국생산제조학회 2010 한국생산제조학회지 Vol.25 No.5
Angular contact ball bearings in a high speed spindles are under the extreme conditions, such as high temperature, big centrifugal force and thrust cutting forces. So, the assembly contacts between spindle shaft and inner ring bearings, bearing housing and outer ring of bearings are occasionally unstable at high speed revolution. Furthermore, the ball contact angle of a bearing, which influence stiffness and lifetime of bearings, are changed according to loads and rotational speed. To analyze internal forces of a bearing under high speed revolution, the ball contact are calculated using nonlinear equations in consideration of rotational speed, thrust loads and raceway form. Diameter increase of inner and outer ring by influence factors, such as internal forces to inner and outer ring, centrifugal force and temperature of inner and outer rings are calculated to establish stable state in bearing assembly in high speed spindle. Finally, contribution ratio of influence factor to assembly design tolerance of inner and outer rings are shown and the stable assembly design tolerance are proposed.