http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Electrical Modeling of 10㎾ PEMFC
Jinmok Lee(이진목),Ga-Woo Park(박가우),Jaeho Choi(최재호) 전력전자학회 2008 전력전자학술대회 논문집 Vol.- No.-
As arising the cost and decreasing of gasoline and fossil fuel, renewable energy sources such as photovoltaics, wind and fuel cell have been interested. Among of them, PEM fuel cells are good energy sources to provide reliable power at steady state regardless of weather, time of day and location as long as the fuel and air are supplied, but they cannot respond to electrical load transients as fast as desired. This is mainly due to their slow internal electrochemical and thermodynamic responses. Therefore, to use the fuel cells with high efficiency, this paper finds characteristic curve and understand operation of PEMFC based on three theoretical approaches such as activation, ohmic and concentration and make the model using MATLAB. That result was compared with real system to certify.
이진목(Jinmok Lee),박가우(Gawoo Park),이재문(Jaemoon Lee),정헌선(Hunsun Jung),노세진(Sejin Noh),최재호(Jaeho Choi) 전력전자학회 2007 전력전자학술대회 논문집 Vol.- No.-
This paper proposes a robust digital controller for PWM voltage source inverter using CRA method. The usual inverter controller for the operation of constant voltage and constant frequency consists of a double looped PI controller for the outer voltage controller and the inner current controller, of which the order of characteristic polynomial is high and so the gain tuning is difficult. Considering the limited switching frequency of the devices and sampling frequency of the digital controller, the gain tuning is usually based on the engineering experiences with the try and error method. In this paper, the error-space approach is used to get the system model including the controller with low order, and the characteristic ratio assignment (CRA) method is proposed for the design of robust controller which has the advantage to design the optimal gain to meet the referenced response and overshoot within the limit range. The PSiM simulation and experience results are shown to verify the validity of the proposed controller.
이진목(Jinmok Lee),박가우(Gawoo Park),김형철(Hyungchul Kim),염상구(Sanggu Yeom),윤기복(Kee-Bok Yun),최재호(Jaeho Choi),홍현문(Hyun-moon Hong) 전력전자학회 2006 전력전자학술대회 논문집 Vol.- No.-
연료전지용 전력변환 시스템에서 기존의 PID 제어기의 해석적인 해를 얻는 것은 매우 어려운 일이다. 최근, UPS용 CVCF 시스템에서 오차 공간 접근법을 이용한 새로운 제어알고리즘을 바탕으로 시스템의 제어기의 제어상수를 해석적으로 접근하여 좋은 성능을 얻은 바 있다. 오차 공간 접근법은 해석적으로 시스템의 응답속도 및 오버슈트를 임의의 제한범위 내로 설계할 수 있도록 하는 제어할 수 있는 장점이 있다. 이러한 UPS 시스템의 제어기 설계방법을 유사한 구조의 연료전지의 인버터 제어기 설계에 적용하여 해석적으로 제어기의 제어상수를 얻고 시뮬레이션을 통하여 제어기가 안정하며 빠른 응답속도를 가지는 것을 확인한다.
이진목(Jinmok Lee),오승훈(Seunghun Oh),고광수(Kwang-soo Koh),권혁일(Hyuuk-il Kwon),박경훈(Kyung-hun Park),한경식(Kyung-sik Han) 전력전자학회 2011 전력전자학술대회 논문집 Vol.2011 No.7
일반적인 승압 컨버터와 H-bridge 인버터로 구성되는 비절연 계통연계형 태양광 인버터 시스템의 효율을 높이기 위해 H-bridge의 스위칭에 적합한 Unipolar 스위칭 방식을 선정하고, 또 SiC 다이오드를 사용함으로써 전체 효율을 향상시켰으며 이를 시뮬레이션과 실험으로 보여준다.
이진목(Jinmok Lee),권경민(Kyoung-Min Kwon),손경민(Kyoungmin Son),최은진(Cui enzhen),임재관(Jaekwan Im),최재호(Jaeho Choi) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
본 논문에서는 단독부하형 삼상인버터의 디지털 전압제어기를 설계한다. 단독부하운전은 선형부하의 변동이나 비선형 부하에서도 안정적인 전압을 공급하는 것이 목적이다. 삼상 인버터를 선형 제어기로 제어하기 위해서 이상동기회전자표계로 제어하지만 두 개의 간섭항 때문에 MIMO 시스템으로 되어 해석적인 제어기를 설계하기 어려워 대부분의 연구에서는 시행착오법으로 제어기를 설계하였다. 본 논문에서는 삼상 인버터의 축변환시에 발생하는 간섭항의 영향을 상대이득행렬로 분석하여 간섭항의 영향을 분석하고 삼상 인버터 시스템을 SISO 시스템으로 만들어 전압제어기만을 갖는 최소 차수의 제어기를 해석적으로 설계하며 응답속도를 향상시키기위해서 오버슈트와 정정시간을 조절할 수 있는 극배치기법으로 설계한다. 설계한 제어기는 시뮬레이션과 실험을 통해서 강인성을 보인다.
시간응답을 고려한 삼상 DC/AC 인버터의 비간섭 제어기 설계
이진목(Jinmok Lee),박가우(Gawoo Park),이재문(Jaemoon Lee),손경민(Kyoungmin Son),Novie Ayub Windarko,민준기(Joon-ki Min),최재호(Jaeho Choi) 전력전자학회 2008 전력전자학술대회 논문집 Vol.- No.-
본 논문에서는 3상 VSI의 CVCF 제어를 위해 폐루프 비간섭 DQ 제어기 설계를 제안한다. DQ 제어기를 설계하기위해서 두 개의 간섭항을 폐루프 분리를 통하여 해석적인 PID 제어기를 설계한다. 제안한 PID 제어기는 시간응답을 만족하도록 설계하여 시뮬레이션을 통해 검증한다.
이진목(Jinmok Lee),노세진(Sejin Noh),손경민(Kyungmin Son),최재호(Jaeho Choi) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.4
This paper presents how to make controller using frequency-response in power electronics. First, To make controller, a frequency response of plant are showed and then a controller is made as the procedure. That way give the easy method to make controller for power electronic converter.
이진목(Jinmok Lee),홍덕표(Ducpyo Hong),김수철(Soocheol Kim),최재호(Jaeho Choi),홍현문(Hyun-Mun Hong) 전력전자학회 2005 전력전자학술대회 논문집 Vol.- No.-
Development of nonlinear loads and compensation instruments make PQ(Power Quality) problem into important issue. Few studies by signal processing and pattern classification as NN(Neural Network), Wavelet Transform, and Fuzzy present feature extraction. A lot of input features make not always good result and they are difficult to make realtime system. Thus, The dimentionality reduction is indispensable process. PCA(Principal Component Analysis) reduces high-dimensional input features onto a lower-dimensional subspace effectively. It will be useful to apply to realtime system and NN.