http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Hysteresis PWM 전류 제어 기법을 사용한 독립 다상 BLDC 전동기의 효율 해석 유효성 검증
이준원,공영경,박선정,최호용,홍성영,Lee, Junewon,Kong, Yeongkyung,Park, Sunjung,Choi, Hoyong,Hong, Sungyoung 한국군사과학기술학회 2014 한국군사과학기술학회지 Vol.17 No.5
In this paper, the analysis and the experiment of independent multi-phase BLDC motor are performed. The back-emf, iron loss analysis are performed by the finite element method and compared with experimental results. The independent multi-phase BLDC motor is manufactured and to measure the efficiency of the motor, evaluation system is also manufactured including the load generator. By comparing the analytic and the experimental results, the effectiveness of the analysis model is verified when calculating the efficiency of the motor.
무강수일수와 강우효과를 고려한 개선된 표준강수지수 개발
이준원,김광섭,Lee, Jun-Won,Kim, Gwang-Seob 한국수자원학회 2012 한국수자원학회논문집 Vol.45 No.4
본 연구에서는 가뭄의 심도에 직접적으로 영향을 주는 무강수일수를 고려하고, 강수에서 기인하는 지표면유출 효과를 반영한 가뭄해갈에 유효한 강수를 산정하여 기존의 SPI3을 개선한 Modified SPI를 제시하였다. 1973년부터 2009년까지 각종 보고서 및 문헌자료를 통해 실제 발생한 가뭄사례를 수집하여 행정구역별 가뭄공간정보를 생산하고, 동일기간 전국 69개지점에서산정된 가뭄지수를 우리나라 전체 공간으로표현하여각종 지수의 적합성을 평가하기 위하여ROC 분석을 수행하였다. 개선된 가뭄지수 제시를 위하여 총 강우량 중단기적인 유출에 기여할 것으로 판단되는 부분을 절삭하여 유효강우를 산정하였으며, 월단위의 무강수일수를 십분위, 누적분포함수로 변형하여 기존의 지수에 가중치를 부여하였다. 분석결과 유출량을 고려한 강우의 절삭은 기존의 SPI3에 비하여 상대적으로 높은 가뭄감지능력을 보여주었으며, 무강수일수를 고려한 가뭄지수의 개선은 누적분포함수의 수치를 고려함으로서 상당히 개선된 가뭄감지 능력을 보여주었다. A modified standardized precipitation index was developed by considering the length of dry period and surface run-off effect. The official reports and newspapers on drought from 1973 to 2009 were quantified to evaluate drought indices. The developed index was evaluated using the receiver operating characteristic analysis. In order to suggest improved drought index, we cut the precipitation amount that may do not contribute the mitigation of drought and weight dry period by considering cumulative distribution, decile distribution of dry periods. Drought detection capability of the suggested index has improved by weighting of dry period effects and considering precipitation amounts contributing drought mitigation.
이준원(Junwon Lee),신세희(Sehee Shin),이학린(Haklin Lee),김동욱(Dongwook Kim),이기철(Kicheol Lee) 한국지반신소재학회 2020 한국지반신소재학회 논문집 Vol.19 No.4
세계적으로 대규모 인프라 구조 건설 시장이 확대됨에 따라 극한지 및 극서지와 같은 극한 환경에서의 토목 구조물 시공이 계획 혹은 시공 중에 있다. 이에 따라 구조물의 지지력 확보를 위한 말뚝 기초의 시공이 필수적이나 극한지 및 극서지의 지반 변형 가능성으로 인해 말뚝 기초의 안정성 및 기능 상실이 우려된다. 따라서 본 연구에서는 새로운 형식의 말뚝 기초를 개발함으로써 지반 변형에 대응하고자 하며, 극한지 및 극서지에서 발생 가능한 지반 변형을 크게 융기 및 침하로 구분하였다. 지반 변형 대응형 말뚝은 강관 말뚝 내부에 수축 및 팽창이 가능한 실린더가 삽입된 형태로 융기 및 침하 과정에서 실린더의 거동에 따른 말뚝 영향을 수치해석적으로 분석하였다. 수치해석 결과 지반 융기는 말뚝의 과도한 인장응력을 발생시켰으며, 실린더의 팽창 조건은 말뚝에 작용하는 인장 응력을 분담해 주어 전체적으로 말뚝에 작용하는 축 응력을 감소시켰다. 지반침하는 부주면 마찰력 발생에 따른 말뚝의 압축응력을 증가시켜 주었는데, 실린더는 중립점 이하에 위치하여 수축 거동 시 최적의 효율을 보여주었다. 하지만 지반 변형 대응형 말뚝 시공 시 수축 및 팽창량은 상부 구조체의 허용 변위 범위를 준수하여야 하며, 설계 시 이에 따른 고려가 필요할 것으로 판단된다. As the global large-scale infrastructure construction market expands, the construction of civil engineering structures in extreme environments such as cold or hot regions is being planned or constructed. Accordingly, the construction of the pile foundation is essential to secure the bearing capacity of the upper structure, but there is a concern about loss of stability and function of the pile foundation due to the possibility of ground deformation in extreme cold and hot regions. Therefore, in this study, a new type of pile foundation is developed to respond with the deformation of the ground, and the ground deformation that can occur in extreme cold and hot region is largely divided into heaving and settlement. The new type of pile foundation is a form in which a cylinder capable of shrinkage and expansion is inserted inside the steel pipe pile, and the effect of the cylinder during the heaving and settlement process was analyzed numerically. As a result of the numerical analysis, the ground heaving caused excessive tensile stress of the pile, and the expansion condition of the cylinder shared the tensile stress acting on the pile and reduced the axial stress acting on the pile. Ground settlement increased the compressive stress of the pile due to the occurrence of negative skin friction. The cylinder must be positioned below the neutral point and behave in shrinkage for optimum efficiency. However, the amount and location of shrinkage and expansion of cylinder must comply with the allowable displacement range of the upper structure. It is judged that the design needs to be considered.
이준원(Jun-won Lee) 한국혁신학회 2019 한국혁신학회지 Vol.14 No.4
본 연구는 기업의 기술력을 기술성, 사업성, 시장성 관점에서 평가한 기술등급에 따라 기업의 경영성과에 유의한 차이가 있는지를 확인함으로써, 혁신 및 기술경영 역량과 중소기업의 경영성과 간 관계를 확인하는 데 목적이 있다. 기업의 규모 및 산업분류를 공변수로 통제한 후 공분산 분석을 실시한 결과 기술력 우수기업은 기술금융 부적합기업에 비해 평균 및 연도별 부채비율이 낮아 지속적인 재무안정성을 유지하는 것으로 확인되었다. 반면, 매출액 증가율의 경우 혁신 및 기술경영 역량에 따른 기업 간 차이를 확인할 수 없었으며, 영업이익률의 경우 기술금융 적합기업이 기술력 우수기업에 비해 유의하게 높은 것으로 나타나 기술력 우수기업군에 대한 수익성 제고방안 및 정책적 뒷받침이 필요한 것으로 판단된다. 즉, 기술등급에 따라 기업의 부채비율에 유의한 차이를 보이는 만큼 기술등급은 기업의 경영성과 중 재무안정성을 일정부분 반영한 유효한 지표라는 결론이 도출되었다. The purpose of this study is to confirm the relationship between innovation, technology management capabilities and business performance of the SMEs by confirming whether there is a significant difference in the business performance of the company according to the technology grade evaluated from the viewpoint of technicality, business value, and marketability. As a result of covariance analysis after controlling the size and industry classification of the firm with a covariance, it was confirmed that the technology outstanding firms maintain the financial stability continuously because the debt ratio is lower than those of the technology finance-inadequate firms. On the other hand, in case of sales growth rate, it was not possible to identify differences among companies according to innovation and the technology management capabilities. Also, in terms of rate of operating profits, it was found that the technology finance-adequate firms are significantly higher than the technology outstanding firms, so it is confirmed that it is necessary to improve the profitability of the technology outstanding firm group. As a results, it is concluded that the technology grade is a valid indicator that reflects the financial stability of the company’s business performance as it shows significant difference in the debt ratio of the company according to the technology grade.