저온 열처리에 의한 Y-TZP 분말의 등온 상전이

이종국,김환,Lee, Jong-Kook,Kim, Hwan 한국세라믹학회 1990 한국세라믹학회지 Vol.27 No.8

The ifluence of transformability and stabilized effects in tetragonal phase on the isothermal phase transformation of Y-TZP at low temperature were investigated. The transformability of Y-TZP powders were gradually increased with calcination temeprature and reached maximum at critical temperature, but when the Y-TZP powders were calcined above critical temperature, transformability of Y-TZP were gradually decreased with increasing calcination temperature. It was concluded that maximum transformability was appeared because particle size effects decreased and constrain effects increased with calcined temperature. The isothermal phase transformation during aging at 25$0^{\circ}C$ only observed in Y-TZP stabilized by constrain effects and the amounts of transformation during aging at 25$0^{\circ}C$ only observed in Y-TZP stabilized by constrain effects and the amount of transformed monoclinic phase during aging decreased with increasing constrain effects. From these results, the mechanism of isothermal phase transformation and degradation behaviors at low temperature in Y-TZP was concluded that occurred by decreasing of constrain effects due to stress relaxation at grian boundary.

실버 페이스트의 치밀화 및 비저항에 미치는 소결조제와 프릿의 영향

이종국,박성현,양권승,Lee, Jong-Kook,Park, Sung-Hyun,Yang, Gwon-Seung 한국재료학회 2008 한국재료학회지 Vol.18 No.5

The effect of sintering aids and glass-frit on the densification and resistivity of silver paste was investigated in an effort to enhance the sintered density and electrical conductivity of the silver electrode. To prepare Pb-free silver paste for use at low sintering temperatures, two commercial silver powders ($0.8\;{\mu}m$ and $1.6\;{\mu}m$ in size) and 5wt.% lab-synthesized nanoparticles (30-50 nm in size) as a sintering aids were mixed with 3 wt.% or 6 wt.% of glass frit ($Bi_2O_3$-based) using a solvent and three roll mills. Thick films from the silver paste were prepared by means of screen printing on an alumina substrate followed by sintering at $450^{\circ}C$ to $550^{\circ}C$ for 15 min. Silver thick films from the paste with bimodal particles showed a high packing density, high densification during sintering and low resistivity compared to films created using monomodal particles. Silver nanoparticles as a sintering aid enhanced the densification of commercial silver powder at a low sintering temperature and induced low resistivity in the silver thick film. The glass frit also enhanced the densification of the films through liquid phase sintering; however, the optimum content of glass frit is necessary to ensure that a dense microstructure and low resistivity are obtained, as excessive glass-frit can provoke low conductivity due to the interconnection of the glass phase with the high resistivity between the silver particles.

${\alpha} - Al_2O_3/SiO_2$복합분말의 반응소결에 있어서 물라이트화 거동

이종국,김희수,김환,Lee, Jong-Kook,Kim, Hey-Soo,Kim, Hwan 한국결정성장학회 1995 韓國結晶成長學會誌 Vol.5 No.2

알루미나 입자표면에 실리카 흡착층을 갖는 복합분말로 제조된 시편을 반응소결시켜 물라이트화 과정을 고찰하였다. 물라이트화 반응은 알루미나와 cristobalite의 계면에서 낮은 알루미나 함량을 갖는 비정질 aluminosilicated 상이 중간층을 형성하면서 시작되고 이 층을 통한 알루미나의 확산에 의하여 물라이트가 성장되었다. 물라이트는 알루미나의 입자의 표면을 따라 성장하였으며 확산에 의해 성장속도가 제어되었다 Sintered bodies were prepared from ${\alpha} - Al_2O_3/SiO_2$ composite powders which each alumina particles were surrounded by silica particles and investigated the mullitization behavior on the process of reaction - sintering. Mullitized reaction was started by formation of amorphous aluminosilicate inter - layer and proceeded by diffusion of alumina through this inter-layer. The growth of mullite was happened along the surface of alumina and controlled by the rate of diffusion.

제조방법에 따른 Y-PSZ 분말의 응집 및 소결특성

이종국,김환,황규홍,Lee, Jong-Kook,Kim, Hwan,Hwang, Kyu-Hong 한국세라믹학회 1985 한국세라믹학회지 Vol.22 No.5

Agglomeration of Y-PSZ and its related properties were studied. The ultrafine $ZrO_2$ powder containg 3 mol% $Y_2O_3$ was prepared by 1) coprecipitation method b) hot petroleum drying method c) sol-gel method and the characteristics of calcined powders and the microstructures of sintered body were observed. Powder prepared by the coprecipitation method was about 125$\AA$ in crystallite size and 0.1~1.0${\mu}{\textrm}{m}$ of intra-agglomerate pore size when calcined at $600^{\circ}C$ for 1 hour. because of small crystallite size and weak agglo merate strength resultant densification of sintered body was high. But above the temperature of 130$0^{\circ}C$ efflorescent phenomena due to anions attached to powder surface was observed. Powder prepared by hot petroleum drying method was 65$\AA$ in crystallite size and 1~10${\mu}{\textrm}{m}$ of intraagglome-rate pore size and it was observed that the agglemerates were formed during the calcining process. In this case despite of small crystallite size the rate of sintering was slow and the existing lenticular interagglomerate pore was not eliminated to the final stage of sintering. Powder prepared by sol-gel method showed solid agglomertes due to rapi dhydrolysis reaction. In this powder which involves strong solid agglomerates overall sintering rate was determined by the sintering between the agglomerates and therefore sinterability of powders made by sol-gel method was very poor.

상압소결 $\beta$-SiC에 있어서 표면부에서의 액상집중과 미세구조의 변화

이종국,양권승,김환,Lee, Jong-Kook,Yang, Gwon-Seung,Kim, Hwan 한국세라믹학회 1996 한국세라믹학회지 Vol.33 No.8

The liquid-phase concentration from the interior to the surface region and its influence on the microstructural changes were investigated in pressureless sintered $\beta$-SiC Surface reaction-layer was formed by reaction of packing powder and volatile components on the surface during sintering which was induced the concentration of liquid-phase in the surface regions. The microstructural changes between the surface region and the interior were appeared in sintered specimen which was resulted from the difference of liquid-phase content during sintering. Microstructural changes were observd with the depth of about 250${\mu}{\textrm}{m}$ from he surface. The grain size and aspect ratio of SiC in the interior are larger than those in the surface region and the rate of transforma-tion of $\beta$-to $\alpha$-SiC during sintering is higher in the interior than that in the surface region.

상압소결에 의하여 제조된 SiC-AlN 복합체에서의 고용체 형성과 미세구조

이종국,김덕준,김환,Lee, Jong-Kook,Kim, Duk-Jun,Kim, Hwan 한국세라믹학회 1996 한국세라믹학회지 Vol.33 No.7

Formation of Solid Solution and Microstructure in Processureless sintered SiC-AlN compo-site using oxides as a sintering aid at 185$0^{\circ}C$ and 195$0^{\circ}C$ Regardless of SiC/AlN ratio in composition most of sintered specimens showed he complex structure mixed with 2H solid solution and SiC particles. High sintering temperature and large AlN content in starting composition enhanced the formation of 2H solid solution in sintered specimen 2H solid solution showed the spherical shape and core-rim structure. AlN content in the core is higher than that in the rim but SiC content . The size of 2H solid solution on fracture showed the transgranular fracture mode compared with the dispersed SiC particles which showed the intergranular fracture mode.

소 뼈로부터 제조한 다공형 하이드록시아파타이트 세라믹스의 생체친화 특성

이종국,고영화,이난희,Lee, Jong-Kook,Ko, Young-Hwa,Lee, Nan-Hee 한국결정성장학회 2012 한국결정성장학회지 Vol.22 No.3

소뼈를 하소하여 천연 하이드록시아파타이트 분말을 얻은 다음, $1100^{\circ}C$ 및 $1200^{\circ}C$로 상압 소결하여 기공율이 각각 35 % 및 18 %인 다공성 하이드록시아파타이트를 제조한 후 이들 시편의 생체친화성을 평가하였다. 골아세포의 성장속도과 세포독성의 유무에 따라 평가되는 생체친화성은 MG-63 세포의 부착능과 분화되어 증식되는 세포의 수로 측정하였다. in vitro에서 세포 반응을 관찰한 결과 소뼈로부터 제조된 하이드록시아파타이트 시편은 독성이 없고 생체 친화성이 좋은 시편이었다. 세포배양 1일 후부터 하이드록시아파타이트 표면에 세포가 부착되었고, 세포배양 후 3일 후에는 핵 주위로 세포질이 퍼져나갔으며, 5일 후에는 부착된 세포의 수가 크게 증가하였다. 배양 초기에는 밀도에 관계 없이 세포의 부착능이 유사하였지만, 세포 배양 시간이 증가하면서 기공율이 높은 시편에서 세포의 부착 및 성장이 더 활발하게 진행되었다. Natural hydroxyapatite powder was obtained from the calcination of bovine bones and its porous compacts were fabricated by pressureless sintering at 1100 and $1200^{\circ}C$ for 1h. To evaluate and compare their biocompatibility with porosity, we investigated the support of osteoblast cells growth and cytotoxicity using the MG-63 cell line model in vitro. Sintered hydroxyapatite ceramics have a porous microstructure with a relative density of 65 % at $1100^{\circ}C$ and 82 % at $1200^{\circ}C$. Cells adherence to the surface of hydroxyapatite ceramics was observed in a day after the cell culture, and the spreading of cytoplasm around the nucleus was shown after 3 day cell culture. Most of cells were extended to the surface of hydroxyapatite through the wide area. Cell viability was nearly the same till 3 days culturing. But the rate of cell growth is higher in the specimen sintered at $1100^{\circ}C$ than that of $1200^{\circ}C$. It indicates that the porosity is an important factor to enhance the cell viability in the porous hydroxyapatite ceramics derived from bovine bones.

콜로이드 Ag 나노입자 합성시 계면활성제의 영향

이종국,최남규,서동석,Lee Jong-Kook,Choi Nam-Kyu,Seo Dong-Seok 한국재료학회 2005 한국재료학회지 Vol.15 No.5

Silver nanoparticles were synthesized by chemical reduction method from aqueous silver nitrate solution ana hydrazine as a reduction agent. The morphology, particle size and shape were dependent on the mixing method, reaction temperature and time, molar ratio of hydrazine and silver nitrate, the kind of surfactant, and the addition of surfactant. The stability of the colloidal silver was achieved by the adsorption of surfactant molecules onto the particle. Silver nanoparticles have a characteristic absorption maximum at 430 nm under UV irradiation. It was found that the colloid was nanometer m size and formed very stable dispersion of silver. The Ag nanoparticles obtained showed the spherical shape with the size range of 10-30 nm.

출발상 제어에 의한 자기복합화 미세구조의 탄화규소 세라믹스 제조

이종국,강현희,이은구,김환,Lee, Jong-Kook,Kang, Hyun-Hee,Lee, Eun-Gu,Kim, Hwan 한국세라믹학회 1997 한국세라믹학회지 Vol.34 No.12

Silicon carbides with self-reinforced microstructure which hore a small grain matrix and dispersed large grains with rod-like type were prepared by the liquid-phase sintering and the control of starting phases of raw materials. The specimens with self-reinforced microstructure could be obtained from the compacts with mixed compositions of $\alpha$-SiC and 10-50 % $\beta$-SiC powders and by the pressureless sintering at 185$0^{\circ}C$ for 5h. Large grains with rod or plate-like types were 4H-SiC and small grains with equi-axed type were 6H-SiC. Fracture grains with rod or plate-like types were 4h-SiC and small grains with equi-axed type were 6H-SiC. Fracture toughness of specimens with self-reinforced microstructure was increased by the crack deflection and formation of microcracking due to the existence of rod-like large grains during crack propagation.

CeO$_2$ 도핑에 의한 불규칙 입자형상의 이트리아 안정화 지르코니아 제조

이종국,강현희,김영정,김환,Lee, Jong-Kook,Kang, Hyun-Hee,Kim, Young-J.,Kim, Hwan 한국세라믹학회 1998 한국세라믹학회지 Vol.35 No.12

Yttria-stabilized zirconia ceramics with irregular grain shapes and curved grain boundaries was prepared by ceria doping. The amount of ceria doped into zirconia compacts by a dipping method were at range of 2 to 20 mol% Irregular grain shapes and curved grain boundaries were formed only inspecimens doped with more than 8mol% cerial. Ceria-doped specimens showed large grain size and low sintered density compared with pure yttria-stabilized zirconia which was due to the increase in the contents of stabilizer and cubic phase. The amount of doped ceria was larger on the surface than the inside regions and therefore mi-crostructure and phase on the surface were different from those in the inside regions. Transgranular frac-ture mode was observed ion ceria doped specimens due to irregular large grain sizes.