http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
산업재해예방을 위한 IoT기반 스마트 건설안전시스템 전환에 관한 연구
김광배 ( Gwang-bae Kim ),이제동 ( Je-dong Lee ),신용태 ( Yongtae Shin ) 한국정보처리학회 2021 한국정보처리학회 학술대회논문집 Vol.28 No.2
최근 많은 이슈가 되고 있는 제 4 차 산업혁명 기술을 건설 분야에 적용하여 다양한 형태의 센서를 활용한 IoT 의 활용가치를 높이고 근로자의 위험사항을 사전에 예방함과 동시에 건설현장에서 IoT 기반 스마트 건설안전시스템 전호구축을 위한 아키텍처를 개발하는 것을 목적으로 하고 있다. 이를 위해 IoT 의 개념을 살펴보고, 현장 안전관리 프로세스를 근로자 편리성을 감안한 아키텍처로 전환연구를 하고자 한다. IoT 기반 스마트 건설안전시스템 구축을 위해서 활용 가능한 위험지역을 도식화하고, 적용 가능한 영역을 파악하였고, 다양한 사전예측분석 알고리즘을 활용하여 안전사고 예방에 관한 사전예측 유형을 분석하였다. 이를 바탕으로 위험지역에 대한 근로자의 동선을 파악한 후 위험지역에 사전정보 제공을 통한 건설현장의 IoT 기반 스마트 건설안전시스템을 전환해서 재해율 감소에 기여하고자 한다.
헬리콥터용 차세대 블레이드의 공력탄성학적 안정성에 관한 시험적 연구
김준호(Kim, Joune-Ho),김승호(Kim, Seung-Ho),이제동(Lee, Je-Dong),이욱(Rhee, Wook),송근웅(Song, Keun-Woong) 한국소음진동공학회 2006 한국소음진동공학회 논문집 Vol.16 No.8
This paper describes the aeroelastic stability test of the small-scaled 'Next-generation Blade(NRSB)' with NRSH (next-generation hub system) and HCTH hingeless hub system in hover and forward flight conditions. Excitation tests of rotor system installed in GSRTS (general small-scale rotor test system) at KARI (Korea Aerospace Research Institute) were carried out to get lead-lag damping ratio of blades with flexures as hub flexure. MBA(moving block analysis) technique was used for the estimation of lead-lag damping ratio. First, NRSB-1F blades with HCTH hub system, then NRSB- 1F with NRSH hub system were tested. Second, NRSB-2F blades with NRSH hub system were tested. Tests were done on the ground and in the wind tunnel according to the test conditions of hover and forward flight, respectively. Non-rotating natural frequencies, non-rotating damping ratios and rotating natural frequencies were showed similar level for each cases. Estimated damping ratios of NRSB-1F, NRSB-2F with HCTH and NRSH were above 0.5%, and damping ratio increased by collective pitch angle increasement. Furthermore damping ratios of NRSB-2F were higher than damping ratios of NRSB-1F in high Pitch angle. It was confirmed that the blade design for noise reduction would give observable improvement in aeroelastic stability compared to paddle blade and NRSB-1F design.
균등 및 비균등 배열 헬리콥터 반토오크 시스템 성능 및 소음특성
송근웅(Song, Keun-Woong),정기훈(Chung, Ki-Hoon),강희정(Kang, Hee-Jung),김승범(Kim, Seung-Bum),이제동(Lee, Je-Dong) 한국소음진동공학회 2006 한국소음진동공학회 논문집 Vol.16 No.8
This paper described the performance test and sound characteristics of helicopter 'Tail-Fan' anti-torque system. In this research, Korea Aerospace Research Institute(KARI) developed 'Tail-Fan' anti-torque system for a helicopter and carried out performance and sound capturing tests of even and uneven tail fans. The performance test is carried out and the noise signals which are generated during the test are saved with microphones at the same time. The performance test's results meet the design requirements. Tone-corrected perceived noise level is reduced by replacing the even product with the uneven one.