발치된 치아에 부착된 수복물의 변연 적합 및 형태

이정훈,최민호,김민호,강동완,Lee, Jeong-Hoon,Choi, Min-Ho,Kim, Min-Ho,Kang, Dong-Wan 대한턱관절교합학회 2002 구강회복응용과학지 Vol.16 No.3

The purpose of the present study was to evaluate the marginal discrepancy and topography of artificial crown on teeth extracted due to severe periodontal disease. Twenty specimens were invested into metamethylacrylate resin and cutted into vertical slices along with the long axis of tooth. The selected marginal discrepancy between the outer edge of the crown and the finishing line of abutment was examined by stereo- microscope(Olympus, PM-VSP-3, Japan) at magnification of up to 10, and the topography of finishing margin on crown was observed by stereomicroscopeat magnification of up to $70{\times}$. The results were as follows. (1) The mean marginal discrepancy between extracted tooth and artificial crown were $50.82{\mu}m$. (2) There was a considerable difference in the microstructure of finishing margins among specimens. Microscopic Structure on finishing margin showed indefinite line, poor fit (open, underextended and overextended), distorted margin, and surface roughness. This study suggested that there could be necessary to consider the response of periodontium to the emergence profile of natural tooth and precision of marginal geometry while establishing treatment planning for the reconsruction of the artificial crown.

PECVD법에 의해 제조된 SnO₂ 박막의 공정변수에 따른 미세구조 및 특성

이정훈,장건익,손상희,Lee, Jeong-Hoon,Jang, Gun-Eik,Son, Sang-Hee 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.7

Tin oxide$(SnO_2)$ thin films were prepared on glass substrate by Plasma Enhanced Chemical Vapor Deposition (PECVD) method. $SnO_2$ thin films were prepared using gas mixture of dibutyltin diacetate as a precursor and oxygen as an oxidant at 275, 325, 375, $425^{\circ}C$, respectively as a function of deposition temperature. The XRD peaks corresponded to those of polycrystalline $SnO_2$, which is in the tetragonal system with a rutil-type structure. As the deposition temperature increased, the texture plane of $SnO_2$ changed from (200) plane to denser (211) and (110) planes. Lower deposition temperature and shorter deposition time led to decreasing surface roughness and electrical resistivity of the formed thin films at $325\sim425^{\circ}C$. The properties of $SnO_2$ films were critically affected by deposition temperature and time.

톨루엔을 분해시키는 미생물의 무작위 운동 ( motility ) 에 관한 연구

이정훈,윤성윤,이진원 ( Jeong Hoon Lee,Seong Yun Yun,Jin Won Lee ) 한국화학공학회 1996 화학공학의이론과응용 Vol.2 No.2

Network Analysis 를 이용한 대장균의 Yield 분석

이정훈,윤성윤,이진원 ( Jeong Hoon Lee,Seong Yun Yun,Jin Won Lee ) 한국화학공학회 1995 화학공학의이론과응용 Vol.1 No.2

Smart Phone 저작권 위반과 포렌식 적용 방안

이정훈,박대우,Yi, Jeong-Hoon,Park, Dea-Woo 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.11

국내 Smart Phone 수요가 급속도로 증가함에 따라 멀티미디어 서비스의 활용도 다양해졌다. Smart Phone 사용자들은 Jail Breaking과 Rooting 등 해킹을 하여 멀티미디어 저작권 콘텐츠를 불법으로 이용하고 있다. 또한 한 미 FTA 체결에 따른 법적 문제제기와 이동통신 단말로서 범죄와 관련성이 높아서, 생성, 저장된 디지털 증거는 증거의 활용도가 높아 모바일 포렌식 연구가 필요하다. 본 논문은 Smart Phone 저작권 위반을 가정한 경우 적법적인 압수 수색의 방법과 주의 할 점을 연구하였다. Smart Phone 저작권 침해 현황과 관련 위반사항들을 방송, 영화, 음악, e-book 등으로 항목별로 조사하였고, 포렌식에 기술을 적용하여 법정에 보고서를 제출하는 방법에 대해 연구하였다. 본 연구 결과는 Smart Phone 범죄 증거 자료 제공과 모바일 포렌식 기술 발전에 기여 할 수 있을 것이다. Smart Phone with domestic demand increasing rapidly, the utilization of multimedia services have become diverse. Smart Phone users use the copyrighted multimedia contents illegally from hacking their Smart Phone with Jail Breaking and Rooting. Legal issues according to the Korea-U.S. FTA. and high relevance with crime as mobile communication terminal, the utilization of created and saved digital evidence is high, the mobile forensic evidence study is required. This paper studied method and notice of legal seizure and search assuming the Smart Phone copyright violation. Research the status of Smart Phone copyright violation and related violation by category as broadcasting, movies, music, e-book etc. Research the method of submit a report to the court by applying techniques to forensic. The results of this research will contribute to the provide of Smart Phone crime evidence and mobile forensic technology.

TiOCl₂ 수용액의 균일침전반응에 의한 나노크기의 브루카이트상 TiO₂ 분말제조

이정훈,양영석,Lee, Jeong-Hoon,Yang, Yeong-Seok 한국재료학회 2002 한국재료학회지 Vol.12 No.12

HCl concentration and reaction time are the decisive factors in determining the structure of precipitates in the process of synthesis of $TiO_2$ particles from aqueous $TiOCl_2$ solution by precipitation and the volumetric proportion of brookite phase in $TiO_2$ particles can be controlled by these two factors. As reaction rate increases with increase of reaction temperature, the reaction time, at which maximum volumetric proportion of brookite phase in $TiO_2$ particles was obtained, was reduced. The brookite was transformed directly to rutile phase with only increase of reaction time. And precipitation was delayed with increase of HCl concentration because the amount of $H_2$O, which is necessary source of oxygen for conversion of $Ti^{+4}$ to $TiO_2$, was relatively reduced with increase of that. Brookite in the mixture phase powder was finally transformed to rutile phase via anatase through heat-treatment.

L. acidophilus KCCM 32820과 P. freudenreichii KCCM 31227로 배양한 유청발효물을 첨가한 반죽 레올로지 및 식빵의 품질특성

이정훈,최미정,정구춘,이시경,Lee, Jeong-Hoon,Choi, Mi-Jung,Chung, Koo-Chun,Lee, Si-Kyung 한국축산식품학회 2012 한국축산식품학회지 Vol.32 No.6

본 실험은 유청을 L. acidophilus KCCM 32820과 P. freudenreichii KCCM 31227로 2단계 발효하여 만든 유청 발효물을 식빵 반죽에 첨가하여 반죽의 레올로지 및 품질특성에 미치는 영향을 분석하여 제품의 품질을 개선하고자 하였다. 레올로지 분석 중 Alveograph에서 $P_{max}$는 시험구가 높았고, 신장성은 대조구가 높아 시험구의 반죽 강도가 강한 것으로 나타났다. DSC에 의한 호화특성은 피크온도($T_p$)와 엔탈피(H)에서 대조구와 시험구에서 차이가 없어 유청발효물이 영향을 주지 않는 것으로 나타났다. 제품의 수분함량은 시험구가 다소 높았으나 유의적 차이가 없었다. 조직감은 저장 3일째까지 시험구가 부드러웠으나 4일 이후에는 두 시료간에 차이가 없었다. 유기산 분석 결과 대조구에서는 프로피온산이 검출되지 않았으나 시험구에서는 1.13 mg/g이 검출되었고 젖산은 대조구보다 시험구에서 높게 검출되었다. 노화특성은 대조구에 비하여 엔탈피 ${\Delta}H$(J/g)가 낮은 시험구에서 느린 것으로 나타났다. This study was carried out to evaluate the effects of whey ferment containing L. acidophilus KCCM 32820 and P. freudenreichii KCCM 31227 on the quality characteristics of white pan bread. Instrumental analysis such as alveograph, gelatinization temperature, texture analysis, retrogradation rate was determined. In an alveograph test, $P_{max}$ value in the treatment was higher than that in the control, but extensibility of dough in the control showed to be higher than in the treatment, so test dough showed more strength than the control. In terms of DSC analysis for gelatinization, temperature there were no significant differences of $T_p$ and ${\Delta}H$ between the control and the treatment. In hardness analysis by rheometer, dough containing whey ferment revealed lower values than the control. From the analysis of the organic acid contents, propionic acid was not detected in the control, however 1.13 mg/g of propionic acid was detected in the treatment. In the retrogradation analysis by DSC, the test delayed slightly compared to the control.

전력 u-IT 융복합화 기기의 평가와 인증 연구

이정훈,박대우,김응식,김홍,Yi, Jeong-Hoon,Park, Dea-Woo,Kim, Eung-Sik,Kim, Hong 한국정보통신학회 2009 한국정보통신학회논문지 Vol.13 No.11

Whole system and network for supply of electric power and electricity safety are essential element. Electricity safety technology need rating for product and research about certification as product development that is done electric power u-IT cotton flannel mixed with development of u-IT, u-City base technology consists. Study on serve to develop electricity safety integration supervision system to apply product to u-City electric power appliance and cotton flannel mixed of u-IT appliance, Connection badness sensing instrument made device built-in electric power u-IT cotton flannel mixed in outlet that is used most in electric power appliance terminal. Using sensor on ZigBee, RFID performance estimation of communication module about function of product for remote safety check of electricity safety integration supervision system. A performance experiment and estimation in electric leakage, high voltage, Arc, fire detection diagnosis system and certification KS, electricity safety about product that get fitness finding. 전력 공급과 전기안전은 전체 시스템과 네트워크에 대한 필수적인 요소이다. 전기안전기술은 u-IT, u-City 기반 기술의 발전과 함께 전력 u-IT 융복합화 제품개발은 제품에 대한 평가와 인증에 관한 연구가 필요하다. 본 논문에서는 전력기기와 u-IT기기의 융복합화 제품을 u-City에 적용시킬 전기안전 통합감시시스템을 개발하기 위해, 전력기기 단말에서 가장 많이 사용되는 아울렛에서 접속불량 검출장치가 내장된 전력 u-IT 융복합화 기기를 만들었다. 또한 전기안전 통합감시시스템에서의 원격 안전점검을 위한 ZigBee, RFID의 센서를 이용하여 통신모듈과 제품의 기능에 대한 성능 평가를 하고, 누전, 고전압, Arc, 화재 검출 센서 진단 시스템에서 성능 실험 및 평가를 하여 적합판정을 받은 제품은 KS, 전기안전제품 인증을 한다.

스노우팩-융설 계산을 위한 에너지수지 알고리즘

이정훈,고경석,Lee, Jeong-Hoon,Ko, Kyung-Seok 한국지하수토양환경학회 2011 지하수토양환경 Vol.16 No.5

Understanding snowmelt movement to the watershed is crucial for both climate change and hydrological studies because the snowmelt is a significant component of groundwater and surface runoff in temperature area. In this work, a new energy balance budget algorithm has been developed for melting snow from a snowpack at the Central Sierra Snow Laboratory (CSSL) in California, US. Using two sets of experiments, artificial rain-on-snow experiments and observations of diel variations, carried out in the winter of 2002 and 2003, we investigate how to calculate the amount of snowmelt from the snowpack using radiation energy and air temperature. To address the effect of air temperature, we calculate the integrated daily solar radiation energy input, and the integrated discharge of snowmelt under the snowpack and the energy required to generate such an amount of meltwater. The difference between the two is the excess (or deficit) energy input and we compare this energy to the average daily temperature. The resulting empirical relationship is used to calculate the instantaneous snowmelt rate in the model used by Lee et al. (2008a; 2010), in addition to the net-short radiation. If for a given 10 minute interval, the energy obtained by the melt calculation is negative, then no melt is generated. The input energy from the sun is considered to be used to increase the temperature of the snowpack. Positive energy is used for melting snow for the 10-minute interval. Using this energy budget algorithm, we optimize the intrinsic permeability of the snowpack for the two sets of experiments using one-dimensional water percolation model, which are $52.5{\times}10^{-10}m^2$ and $75{\times}10^{-10}m^2$ for the artificial rain-on-snow experiments and observations of diel variation, respectively.

유도무기 사격지휘통제 시뮬레이터 시스템 구현

이정훈,김기범,이창림,전정희,구봉주,Yi, Jeong-Hoon,Kim, Ki-Bum,Rhee, Chang-Lim,Jun, Jung-Hee,Koo, Bong-Joo 한국군사과학기술학회 2011 한국군사과학기술학회지 Vol.14 No.4

Recently, the development of military system is focused on Network Centric Warfare. But, there is no deployed Command and Control System for Missile System in the country. Therefore, Command and Control System for Missile System was simulated to predict feasibility for the future development in this paper. The contents of the design and implementation for simulated system are described in details. Besides, a method for avoiding collisions in 1:N radio communication environment is proposed as the future work. The simulated system in this paper will be a help to developing Command and Control System for Missile System in the future.