http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이정일,박지호,이호인,김문일 ( Jung Il Lee,Ji Ho Park,Ho In Lee,Moon Il Kim ) 한국주조공학회 1994 한국주조공학회지 Vol.14 No.5
N/A The effect of various thermomechanical treatments on the structure and rheological behaviour of Al-6.2wt%Si alloy in its solidification range were investigated using a Searle type high temperature viscometer. During continuous cooling, the viscosity increases gradually with increasing fraction of solidified alloy, until a critical fraction of solidified alloy is reached above which the viscosity sharply increases. The viscosity of the slurry, at a given volume fraction wolid, decreased with increasing shear rate. The size and morphology of primary solid particles during stirring is influenced strongly by shear rates, cooling rates, volume fraction and stirring time of solid. Morphological changes during stirring as a function of solid volume fractions, shear rate and processing time were also reported. In this study, the size of primary solid particles in these alloys consistently increases and the it`s aspect ratio decrease with the increase in fraction solid and decrease in shear rate. Crystal morphology changes from rosette type to spheroid type with the increase in shear rate and solid fraction.
이정일,이중원,한일기,정윤선,서상희,Lee, Jung-Il,Lee, Jung-Won,Han, Il-Ki,Chung, Yoon-Suhn,Suh, Sang-Hee 한국진공학회 2010 Applied Science and Convergence Technology Vol.19 No.6
For sustainable and responsible development of nanomaterials technology, the establishment of ethical system for sound social acceptance of the technology as well as the development of the technology itself is necessary. In this paper, global efforts to identify and resolve the ethical issues regarding nanotechnology is reviewed, in particular the environmental, health and safety issues in nanomaterials, and the tools such as communication and engagement of stakeholders, regulations, certifications and workplace guidelines are scrutinized. Finally the policy recommendations for the establishment of ethical systems for safe usage of nanomaterials. 나노재료기술이 지속적으로 발전하기 위해서는 기술 개발 못지않게 개발된 기술이 사회에 순조롭게 용납될 수 있는 윤리적 시스템이 개발되어야 한다. 이 논문에서는 나노기술의 윤리적 문제들에 대한 국내외 연구동향을 종합하고, 특히 나노재료의 환경 건강 안전성 관련 윤리적 문제들과 이를 해결하기 위한 실용적인 도구로서 전 세계적으로 개발되고 있는 이해 당사자 간의 소통 규제 인증, 안전지침을 비판적으로 개괄하여 보았으며, 마지막으로 나노재료의 안전한 사용을 위한 윤리적 시스템 구축에 관한 정책 제안을 하였다.
이정일,권병선,Jung-Il Lee,Jung-Il Lee 한국작물학회 1980 Korean journal of crop science Vol.25 No.2
A $F_1$ hybrid out of 143 crosses of rape (Brassica napus) using cytoplasmic-genetic male sterility yielded 5.18 tons per hectare. European and native varieties used, were found out to have 78% and 58% of genes restoring fertility, respectively. The $F_1$ hybrids of three way cross using non-isogenic maintainer showed higher heteroses than those of double cross. To produce F 1 hybrids of three way cross, three stages of crossing operations are needed and seeds produced from about 60 hectares can be covered to 60, 000 hectares.
이정일,이호준,윤요한,이주연,조현수,조현,류정호,Lee, Jung-Il,Lee, Ho Jun,Yoon, Yo Han,Lee, Ju Yeon,Cho, Hyun Su,Cho, Hyun,Ryu, Jeong Ho 한국결정성장학회 2017 한국결정성장학회지 Vol.27 No.2
최근 수년 동안 Sn-3.0Ag-0.5Cu(weight%) 조성의 합금은 주요 전자 제조업체들의 대표 무연솔더 조성으로 다양한 전자제품의 제작에 적용되어 왔다. 그러나 최근 Ag 가격의 급격한 상승과 전자산업의 저가격화 전략으로 인해 솔더 재료에서의 Ag 함량의 감소가 지속적으로 요구되고 있다. 본 연구에서는 Sn-3.0Ag-0.5Cu 조성의 무연솔더를 주석, 은 및 구리 금속분말의 용융을 이용하여 합금화 하였다. 제조한 Sn-3.0Ag-0.5Cu 샘플에 대한 결정구조 및 미세구조를 XRD, 광학현미경, FE-SEM 및 EDS 분석을 이용하여 검토하였다. 분석결과, 제조된 Sn-3.0Ag-0.5Cu 샘플은 ${\beta}-Sn$, ${\varepsilon}-Ag_3Sn$ 및 ${\eta}-Cu_6Sn_5$ 결정으로 구성되어 있었다. In the past few years, Sn-3.0Ag-0.5Cu (weight%) solder composition has been a representative material to electronic industries as a replacement of Pb-base solder alloy. Therefore, extensive studies on process and/or reliability related with the composition have been reported. However, recent rapid rise in Ag price has demanded solder compositions of low Ag content. In this study, Sn-3.0Ag-0.5Cu solder bar sample was fabricated by melting of Sn, Ag and Cu metal powders. Crystal structure and element concentration were analyzed by XRD, optical microscope, FE-SEM and EDS. The Sn-3.0Ag-0.5Cu solder sample was composed of ${\beta}$-Sn, ${\varepsilon}-Ag_3Sn$ and ${\eta}-Cu_6Sn_5$ phases.
(Ce<sub>x</sub>Lu<sub>1-x</sub>)<sub>3</sub>MgAl<sub>3</sub>SiO<sub>12</sub> 황색 형광체의 광학적 특성
이정일,김태완,오호라,홍창우,류정호,Lee, Jung-Il,Kim, Tae Wan,Oh, Ho Ra,Hong, Chang Woo,Ryu, Jeong Ho 한국결정성장학회 2016 한국결정성장학회지 Vol.26 No.1
$Ce^{3+}$ 이온을 도핑한 $(Ce_xLu_{1-x})_3MgAl_3SiO_{12}$ 형광체 샘플을 고상합성법으로 합성하였다. 열처리 온도를 1250부터 $1550^{\circ}C$ 온도영역에서 조절하면서 5 h 동안 소성하였으며, 소성된 샘플들의 XRD와 PL 특성을 조사하여 가장 최적의 열처리 온도를 구하고자 하였다. 또한 $Ce^{3+}$ 이온의 도핑농도를 2.0에서 10.0 mol%로 변화시키면서 $Ce^{3+}$ 이온의 도핑농도와 광학적 특성과의 관계를 고찰하였다. $Ce^{3+}$ 이온의 도핑농도에 따른 형광체들의 PL 강도, 피크위치, 반치폭을 계산하여 실제적인 LED 패키징에 가장 적절한 Ce 도핑 농도를 구하고자 하였다. 또한 최적의 소성온도와 Ce 도핑농도 조건에서 합성한 형광체 샘플의 입도와 입형을 분석하였다. A novel $Ce^{3+}$ doped $(Ce_xLu_{1-x})_3MgAl_3SiO_{12}$ phosphor was successfully synthesized by a conventional solid-state reaction. Heat-treatment temperature was controlled from 1250 to $1550^{\circ}C$ for 5 h. XRD and PL properties were analyzed for the optimum heat-treatment condition. Ce doping concentration was varied from 2.0 to 10.0 mol% for the optimum Ce doping concentration. The PL intensity, peak wavelength and FWHM were calculated with the Ce doping concentration, and evaluated for the application to LED packaging. Particle size and morphology were also characterized for synthesized phosphor sample at optimum heat-temperature and Ce doping concentration.
Sn-3.0Ag-0.5Cu, Sn-0.7Cu 및 Sn-0.3Ag-0.5Cu 합금의 제조 및 특성평가
이정일,팽종민,조현수,양수민,류정호,Lee, Jung-Il,Paeng, Jong Min,Cho, Hyun Su,Yang, Su Min,Ryu, Jeong Ho 한국결정성장학회 2018 韓國結晶成長學會誌 Vol.28 No.3
솔더(solder) 재료는 수 천년 이상 인류 문명과 함께해온 대표적인 금속 합금으로서 현재까지도 전자 패키징(electronic packaging) 및 표면 실장(SMT, surface mount technology) 분야의 핵심 소재로 사용되고 있다 그러나 최근 Ag 가격의 급격한 상승과 전자산업의 저가격화 전략으로 인해 솔더 재료에서의 Ag 함량의 감소가 지속적으로 요구되고 있다. 본 연구에서는 Sn-3.0Ag-0.5Cu, Sn-0.7Cu 및 Sn-0.3Ag-0.5Cu(weight%) 조성의 무연납 솔더바 샘플을 주조법으로 합금화 하였다. 제조한 Sn-3.0Ag-0.5Cu, Sn-0.7Cu 및 Sn-0.3Ag-0.5Cu 샘플에 대한 결정구조, 화학조성 및 미세구조를 XRD, XRF, 광학현미경, FE-SEM 및 EDS 분석을 이용하여 조사하였다. 분석결과, 제조된 샘플은 ${\beta}-Sn$, ${\varepsilon}-Ag_3Sn$ 및 ${\eta}-Cu_6Sn_5$ 결정으로 구성되어 있었을 확인할 수 있었다. In the past few years, various solder compositions have been a representative material to electronic packages and surface mount technology industries as a replacement of Pb-base solder alloy. Therefore, extensive studies on process and/or reliability related with the low Ag composition have been reported because of recent rapid rise in Ag price. In this study, Sn-3.0Ag-0.5Cu, Sn-0.7Cu and Sn-0.3Ag-0.5Cu solder bar samples were fabricated by melting of Sn, Ag and Cu metal powders. Crystal structure and element concentration were analyzed by XRD, XRF, optical microscope, FE-SEM and EDS. The fabricated solder samples were composed of ${\beta}-Sn$, ${\varepsilon}-Ag_3Sn$ and ${\eta}-Cu_6Sn_5$ phases.
금속기 복합재료의 틱소포밍 특성 ($SiC_p/AZ91HP$ Mg 복합재료의 상분석을 중심으로)
이정일,김영직,Lee, Jung-Il,Kim, Young-Jig 한국현미경학회 1999 Applied microscopy Vol.29 No.3
교반관법으로 제조한 $AZ91HP/SiC_p$ Mg 복합재료를 틱소포팅하여 미세조직과 존재상들을 조사하였다. $AZ91HP/SiC_p$ Mg 복합재료를 반응고 가공시 액상율 50% 이상에서 완전 충전이 이루어겼으며 전형적인 반응고 조직을 보였다. 복합재료내의 강화상이 초정 $\alpha$상의 합체, 조대화를 억제하여 보다 용이하게 thixotropic 조직을 가질 수 있었다. TEM 관찰결과, 복합재료내의 계면반응 생성물은 MgO, $Mg_2Si$ 및 $Al_{12}Mg_{17}$등이며, 직접 가압시 정출상으로 나타나는 비평형상인 decagonal T상이 관찰되었으며, 이 상은 간접가압시 안정상인 $Al_6Mn$의 형태로 관찰되었다. 이는 간접가압시 승온시간이 직접가압보다 상대적으로 길어, 비평형의 decagonal T상이 안정한 $Al_6Mn$상으로 생성된 것으로 판단된다. 아직까지 생성과정이 명확하진 않으나 교반관법으로 제조 후, 2차가압 성형시 비평형상의 존재는 재료의 강화에 기여할 것으로 판단된다. The stirred and thixoformed $SiC_p/AZ91HP$ Mg composites are studied on the basis of microstructural analysis using transmission electron microscopy (TEM). The products of interfacial reaction are identified as $Mg_2Si$, MgO and $Mg_{17}Al_{12}$ phases and the crystallized phases are found to be orthorhmbic $Al_6Mn$ and decagonal T phases. It is shown that $Mg_2Si$ and $Mg_{17}Al_{12}$ phases are found at the surface of $SiC_p$ and $Al_6Mn$ is found near interface and crystallized on the matrix. Phase identification is carried out by crystallographic work based on primitive cell volume, zero order Laue zone (ZOLZ) patterns and single convergent beam electron diffraction (CBED) patterns containing higher order Laue zone ring from a nanosized region.
이정일,류정호,Lee, Jung-Il,Ryu, Jeong Ho 한국교통대학교 융복합기술연구소 2014 융ㆍ복합기술연구소 논문집 Vol.4 No.1
White LEDs (light-emitting diodes) are promising new-generation light sources which can replace conventional lamps due to their high reliability, low energy consumption and eco-friendly effects. This paper briefly reviews recent progress of oxy/nitride host phosphor and quantum dot materials with broad excitation band characteristics for phosphor-converted white LEDs. Among oxy/nitride host materials, $M_2Si_5N_8:Eu^{2+}$, $MAlSiN_3:Eu^{2+}$ M-SiON(M=Ca, Sr, Ba), ${\alpha}/{\beta}-SiAlON:Eu^{2+}$ are excellent phosphors for white LED using blue-emitting chip. They have very broad excitation bands in the range of 440-460 nm and exhibit emission from green to red. In this paper, In this review we focus on recent developments in the crystal structure, luminescence and applications of the oxy/nitride phosphors for white LEDs. In addition, the application prospects and current trends of research and development of quantum dot phosphors are also discussed.
Cu<sub>50</sub>-Fe<sub>50</sub> 합금의 제조 및 특성평가
이정일,딜리람,팽종민,조현수,양수민,류정호,Lee, Jung-Il,Lam, Dilli,Paeng, Jong Min,Cho, Hyun Su,Yang, Su Min,Ryu, Jeong Ho 한국결정성장학회 2018 한국결정성장학회지 Vol.28 No.4
구리 금속은 높은 열전도도로 heat sink 혹은 heat exchanger로 널리 사용되고 있다. 그러나 이에 반하여 낮은 인장강도와 사용온도 한계를 가지고 있다. 따라서 높은 열전도도, 낮은 제작비와 함께 우수한 기계적 특성이 요구된다. 본 연구에서는 이를 위하여 동철합금($Cu_{50}-Fe_{50}$ alloy)를 고주파 가열로를 이용하여 제조하고 그 특성을 조사하였다. 제조된 동철합금은 Cu, ${\alpha}$-Fe, ${\gamma}$-Fe 결정구조를 기진 dendrite 미세구조를 보여주었다. 제조된 동철합금은 XRD, FE-SEM, EDS 및 XRF를 이용하여 결정구조 및 미세구조를 분석하였으며 전력공급 접점용 소재로서의 적합성을 확인하고자 하였다. Copper is a well know material for use as heat sink or heat exchanger. However, copper has a considerable low tensile strength and temperature limit. A material that has a good thermal conductivity, low cost, but also excellent mechanical properties are desired. In order to identify the mechanism for the material properties of cast Cu-Fe alloys, $Cu_{50}-Fe_{50}$ (wt.%) alloy was produced by using a high-frequency induction furnace, a typical metal casting process. The Cu-Fe alloy consists of Cu, ${\alpha}$-Fe, ${\gamma}$-Fe with dendrite structures. The crystal structure and microstructure of the prepared $Cu_{50}-Fe_{50}$ alloy were systematically examined using XRD, FE-SEM, EDS and XRF for electrical devices.
에어프라이어의 화재사례와 재현실험을 통한 화재위험성 분석
이정일,조명식,Lee, Jung-Il,Jo, Myeng-Sik 대한안전경영과학회 2020 대한안전경영과학회지 Vol.22 No.2
This paper recognizes the risk of ignition of air fryer (machine that can cook fried dishes with hot air without oil) that is far exceeding the sales rate of microwave ovens, which is necessary to modern household kitchen, and identifies fire risk through the operation principle of the process of heat transfer, and the main structure of the machine. The fire test that we conducted is to observe the risk of ignition of the machine due to the damage to the safety system and the possibility of igniting oil paper along with food, to experiment with the possibility of ignition due to blockage of the exhaust due to obstacles, and accumulation of oil stains on the hot wire, and to present the method of fire control and devise countermeasures.