http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이재기,신상권,남상식,박권철,Lee, J.K.,Shin, S.K.,Nam, S.S.,Park, K.C. 한국전자통신연구원 1999 전자통신동향분석 Vol.14 No.4
In this paper, we summarize the lessons learned from the applications of the software reliability engineering to a large-scale software project. The considered software is the software system of the TDX-10 ISDN switching system. The considered software consists of many components, called functional blocks. These functional blocks serve as the unit of coding and test. The software is continuing to be developed by adding new functional blocks. We are mainly concerned with the analysis of the effects of these software components to software reliability and with the analysis of the reliability evolution. We analyze the static characteristics of the software related to software reliability using failure data collected during system test. We also discussed a pattern which represents a local and global growth of the software reliability as version evolves. To find the pattern of software of the TDX-10 ISDN system, we apply the S-shaped model to a collection of failure data sets of each evolutionary version and the Goel-Okumoto (G-O) model to a grouped overall failure data set. We expect this pattern analysis will be helpful to plan and manage necessary human/resources for a new similar software project which is developed under the same developing circumstances by estimating the total software failures with respect to its size and time.
3차원 열전달 해석을 통한 n-도데케인 스크램제트 냉각채널의 1차원 모델 개발
이재인(J.I. Lee),김규홍(K.H. Kim) 한국전산유체공학회 2020 한국전산유체공학회지 Vol.25 No.3
Three-dimensional heat transfer numerical analysis of the regenerative cooling system applied to the combustion chamber of the scramjet propulsion system in the environment of mach number 4 to 6 was conducted. The number of cooling channels and the mass flow rate of fuel per unit channel were determined by the size of the combustion chamber and the air mass flow rate and the equivalent ratio to which the scram mode and the ram mode were assumed. The aspect ratio of the cooling channel was divided into four cases(1,2,4 and 8) and the assumed heat flux condition on the combustor was 1.5MW/m² to 2.5MW/m². Among the ten turbulent heat transfer duct flow models, the Bae-Kim model suits the best to the supercritical n-dodecane cooling channel and the heat transfer model was improved by revising the geometry effect and one-sided heat effect.
소프트웨어 내에 잠입한 에러에 의한 불완전 디버깅을 고려한 소프트웨어 신뢰도성장모델
이재기,이경호,박권철,Lee, J.K.,Lee, K.H.,Park, K.C. 한국전자통신연구원 2003 전자통신동향분석 Vol.18 No.5
소프트웨어의 신뢰성을 정량적으로 평가하는 데 있어서 소프트웨어 개발 프로세스의 시험단계나 사용자의 운용단계에 처한 동적 환경상태에서 소프트웨어 고장발생기능 현상을 기술한 소프트웨어 신뢰도성장모델을 많이 제안하고 있다. 대다수의 모델이 발생된 소프트웨어 고장의 발생원인에 대한 완전한 수정을 요구하는 완전 디버깅 환경을 가정하고 있다. 그러나 실제 개발자가 디버깅 작업을 수행할 때 완전한 수정이 불가능하기 때문이다. 다시 말해서 여러 소프트웨어 개발자가 경험한 이러한 디버깅 작업을 행하는 경우에는 결함을 제거하는 데 한계가 있기 때문에 수정 작업시 새로운 결함이 삽입되는 경우가 많다. 즉, 결함 수정은 불완전 환경에 처한다. 본 논문에서는 결함 수정시 신규 결함의 삽입 가능성을 고려하고 불완전 디버깅 환경에 대한 소프트웨어 신뢰도 성장모델을 제안한다. 소프트웨어 동작 환경 하에서 발생된 소프트웨어 고장과 시험 전 소프트웨어 내의 고유 결함에 의한 고장과 동작중에 랜덤하게 삽입된 결함에 의해 발생되는 고장 등 2종류의 결함을 고려하여 비동차 포아송과정(NHPP)에 의한 소프트웨어 고장발생 현상을 기술한다. 또한 소프트웨어 신뢰성 평가에 유용한 정량적인 척도를 도출하고 실측 데이터를 이용하여 적용한 결과를 제시하고 기존의 모델과의 적합성을 비교, 분석한다.
유사 프로젝트(ACE64/256)로부터 얻은 경험 데이터에 의한 소프트웨어 신뢰도 예측
이재기,신상권,남상식,박권철,Lee, J.K.,Shin, S.K.,Nam, S.S.,Park, K.C. 한국전자통신연구원 2000 전자통신동향분석 Vol.15 No.5
시험기간 동안 수집된 고장 데이터를 이용하여 소프트웨어 신뢰도를 예측할 수 있는 모델은 많으나 이 예측 방법은 정확하지 못하며, 특히 초기 시험 단계에서는 더욱 더 부정확하여 예측자들은 이러한 소프트웨어 신뢰도 모델의 적용을 주저한다. 한편 소프트웨어 신뢰도 성장 모델은 유사 프로젝트나 개발 초기에 얻은 정보를 가지고는 신뢰도 예측 데이터로 활용이 불가능하다. 예를 들면 최근의 소프트웨어 시스템들은 항시 유사 프로젝트들로부터 활용이 가능한 일련의 정보와 동일 응용 영역의 초기 또는 최신의 정보들이 변경, 개선되기 때문이다. 본 논문에서는 유사한 프로젝트로부터 얻은 공통의 데이터들을 활용하여 소프트웨어 신뢰도를 예측할 수 있는 방법들을 제안한다. 특히 일반적으로 사용되고 있는 Goel-Okumoto(G-O) 모델이나 고장 검출률을 이용하거나 시험 데이터를 활용하는 방법 등을 이용하여 모델 파라미터를 추정하고 실제 프로젝트 수행중에 얻어진 각종 결과를 토대로 해서 Numerical Algorithm이 아닌 통계적인 관점의 분석 결과와 MLE(Maximum Likelihood Estimation) 추정 방법 등을 동원하여 초기에 우리 프로젝트에 맞는 정확한 소프트웨어 신뢰도 평가 방법을 제안하였다.
이재기,신상권,남상식,박권철,Lee, J.K.,Shin, S.K.,Nam, S.S.,Park, K.C. 한국전자통신연구원 1999 전자통신동향분석 Vol.14 No.5
폭발적으로 증가하는 소프트웨어에 대한 수요를 만족하기 위해 소프트웨어 생산성을 향상시키려는 노력이 증대되어 왔다. 이런 추세에 맞추어 개발된 소프트웨어를 이식하는 방법들이 연구되어 왔으며, 새로운 환경으로 효율적으로 이식함으로써 소프트웨어의 생산성을 향상시키려는 시도가 잇달았다. 본 논문에서는 이러한 관점에서 소프트웨어 이식 시 문제점들을 살펴보고, 실제 경험한 ATM 교환 소프트웨어에 대한 이식 저해 요인과 이식된 소프트웨어의 생산성에 대한 평가를 2개의 대표적인 프로젝트 규모 모델에 적용하여 평가하였다. 또한 기존 모델에 적용하는 과정에서의 문제점을 제시함으로써 향후 교환 소프트웨어의 프로젝트 규모 모델에 의한 평가방법을 정립하는 데 기초자료로 활용될 수 있도록 하였다.