http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이장덕,구자갑,김종수,이송 안성산업대학교 1996 論文集 Vol.28 No.-
A general govering equation for PMT can be derived based on the hyperbolic soil model and the cavity expansion theory. The curve fitting technique was used to establish the pressure-strain curve without disturbance of soil during testing. This interpretation makes use of both the loading and unloading portions of the test. An interpretation methodology is described and illustrated with PMT data carried out in the weathered Granitic soil to estimate initial shear modulus. SPT is very common site investigation technique in Korea. Therefore the blow counts of SPT are compared with initial shear modulus which give a following relationship. G_i = -102 + (kg/㎠)
이장덕 한국지반공학회 1996 지반 : 한국지반공학회지 Vol.12 No.6
흙과 Geogrid사이의 응력 전달은 마찰저항 및 수동저항으로 나눌 수 있는데 Geogrid의 횡방향 요소에 작용하는 수동저항은 그 메카니즘이 복잡하여 아직까지 거동이 명확하게 파악되지 못하고 있다. 이러한 수동저항의 메카니즘을 이해하기 위하여 돌기가 있는 보강재에 대한 직접 전단시험을 유한 요소 방법으로 해석하였다. 유한 요소해석으로 돌기의 간격에 따라 수동저항의 크기, 파괴형태, 응력 및 변형 분포 등을 분석하였으며 일 결과들을 실제 계측치와 비교 분석하여 Geogrid의 횡방향 요소에 작용하는 보강재의 수동저항의 거동을 파악하도록 하였다. 또한 흙의 종류에 따라 수동저항의 메카니즘을 파악하기 위해 점성토에 작용하는 수동저항의 거동을 예측하였다. The stress transfer mechanism between soil and grid reinforcements involves two basic mechanism : frictional soil resistance and passive soil resistance. However the mechanism of the passive soil resistance is very complex to understand. To study the failure mechanism of ribbed reinforcement, the direct shear tests which are dominated by passive soil resistance are analyzed by using the finite element method. The finite element method is used to examine the effects of ribs on this passive soil resistance development and the met hanism of failure. The calculated behavior of the ribbed reinforcement is compared with the measured behavi or. Comparisons between the measured and the simulated strain pat terns, failure modes and load displacement relationship are presented. The behavior of the ribbed reinforcements in a cohesive soil is predicted on the basis of a good agreement between the measured and the Predicted behavior of the Ottawa sand.
이명환,이장덕 한국지반공학회 1990 대한토질공학회지 Vol.6 No.4
말뚝의 지지력을 예측키 위한 수많은 방안들이 제안되어 왔으나,말뚝 재하시험에 의하는 방법 외에는 신뢰도가 낮은 실정이다. 그럼에도 불구하고 말뚝 재하시험 수행에는 많은 비용과 시간이 소요되어 극히 제한된 경우에만 적용되고 있다. 본 연구에서는 새로운 말뚝재하시험, "간편한 말뚝 재하시험 (SPLT)방법"을 소개한다. SPLT에서는 분리할 수 있는 선단부와 축소된 선단부가 시험말 뚝에 설계되어, 주면마찰력이 말뚝 선단부의 침하를 야기시키는 반력으로 작용하게 된다. 이에 따라 하중재하장치 또는 하중의 제작,설치 및 제거 과정이 생략될 수 있다. 생략될 수 있다. There have been numerous methods proposed to predict the pile bearing capacity, but except for the prediction by the pile loading test, not one method is suitable to give a reliable result. Even so, the pile loading test has seldom been performed due to the time and money consuming procedures. In this research, a new way of carrying out the pile loading test, "Simple Pile Loading Test(SPLT)" is introduced. In SPLT technique, the test pile is designed to have a separable shoe with a reduced sized sliding core, so that the skin friction acts as the reaction force to cause the pile tip settlement. Therefore the preparation, installation, loading and unloading of the loading frames and the kentledge can be eliminated.liminated.