http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
GMAW의 금속이행에 영향을 주는 변수연구를 위한 계측 시스템과 조건해석
이세헌 대한용접접합학회 1993 대한용접·접합학회지 Vol.11 No.1
The phenomenon of metal transfer has been investigated for different transfer modes using a digital high speed motion analyzer and an arc shadow-graphing system based on a laser source and related optical system. It was observed that the pinch instability phenomenon did not occur for the globular transfer mode, since the liquid globule was then spherical rateher than a cylindrical liquid bar. On increasing the ratio of carbon dioxide to argon, the transition current from globular to spray transfer generally increased, but it is interesting that the transition was observed to occur at the lowest current in a 5% CO$_{2}$-95% argon gas mixture. For pure carbon dioxide and helium shielding gases, the drop frequency increased slowly with increasing current. At high currents or an argon based shielding gas, the length of liquid bar decreased as the carbon dioxide content increased. The acceleration of a droplet within the arc was determined using the gas drag force theory and was found to be greater than the experimental results.
이세헌 대한용접접합학회 1992 대한용접·접합학회지 Vol.10 No.1
최근 인건비의 급격한 상승과 용접 숙련공의 절대부족 현상은 용접에 있어서 자동화를 절실히 요구하게 되었다. 용접 자동화에 가장 많이 이용되고 있는 용접방법으로 크게 아크 용접과 스 폿용접으로 대별할 수 있는데 이는 작동이 간단하고 가격이 저렴하여 대량 생산이 가능하기 때 문이다. 아크용접은 아크를 열원으로 사용하는 용접법으로 아크 온도는 지구상에 존재하는 모든 금속을 용융시키기에 충분하지만 아크의 독특하고 복잡한 성질 때문에 오랫동안 연구가 되어 왔다. 용접자동화, 특히 무인용접 자동화설계를 위해서는 아크의 물리적 현상에 대한 특성해석을 하여야 하며, 후판용접에 주로 이용되는 GMAW에서는 금속이행 현상을 중점 연구함으로써 아크안정성 및 양질의 비이드 현상을 생성 할 수 있다. 따라서 기본적인 아크의 전기적 특성을 알고, 용접 가공시 아크의 온도, Arc force등의 기계적 성질을 이해하는 것이 필요하다.