http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이상헌,Lee, Sang-Heon 한국전기전자학회 1999 전기전자학회논문지 Vol.3 No.2
YBaCuO계 초전도체로 자기 센서를 제작하였다. 초전도 자기 센서는 약 95K에서 초전도 특성이 나타나며 액체질소온도에서 외부 자계를 인가할 때 전기저항이 증가하였다. 자계 인가로 인해 센서에서 발생되는 전압강하는 0에서부터 $100{\mu}V$이상으로 변화하였다. 전기저항의 변화는 자계에 의존하며, 센서의 감도는 2.9 ohm/T가 된다. 이 센서는 약 $1.5{\times}10^{-5}T(=1.5{\times}10^{-1}G)$까지의 자기를 감지 할 수 있다. 외부자계에 의한 전기저항의 증가는 초전도재료를 관통하는 자속으로 인한 Josephson 접합의 변화에 기인한다. A magnetic field sensor is fabricated with superconducting ceramics of Y-Ba-Cu-O system. The prepared material shows the superconductivity at about 95K. The sensor at liquid nitrogen temperature shows the increase in electrical resistance by applying magnetic field. Actually, the voltage drop across the sensor is changed from zero to a value. more than $100{\mu}V$ by the applied magnetic field. The change in electrical resistance depends on magnetic field. The sensitivity of this sensor is 2.9 ohm/T. The sensing limit is about $1.5{\times}10^{-5}T(=1.5{\times}10^{-1}G)$. The increase in electrical resistance by the magnetic field is ascribed to a modification of the Josephson junctions due to the penetrating magnetic flux into the superconducting material.
이상헌,Lee, Sang-Heon 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.2
In this research, the development of fabrication technique of bulk YBaCuO superconductors for application was studied. In fluence of $BaZrO_3$ addition on magnetization characteristics of thermal pyrolysis textured YBaCuO superconductor was investigated. Fine $BaZrO_3$ particle were dispersed within the textured YBaCuO matrix by means of the thermal pyrolysis processing. Magnetic levitation force for YBaCuO superconductors were obtained using Nd-B-Fe permanent magnet, at 77 K and at the magnetic field from 0 to 5.3 K gauss. In the unadded superconductor and 5 wt% $BaZrO_3$ addition, anomalous magnetization behavior, which is characterized by the intermediate magnetic field, was observed at 77 K. Critical current density was about few hundreds $A/cm^2$ and the magnetic characteristics increased slightly by addition of $BaZrO_3$ powder. Maximum magnetic force was obtained in the YBaCuO superconducting bulk with 3 wt.% $BaZrO_3$ addition.
유기 금속염법에 의한 고효율 전력전송용 BiSrCaCuO 초전도 전구체 합성
이상헌,Lee, Sang-Heon 한국전기전자재료학회 2005 전기전자재료학회논문지 Vol.18 No.10
High Tc superconducting with a BiSrCaCuO was prepared by the titrate method. The solid precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12 h is not in the amorphous state as expected but in a crystalline state. X-tay diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor.