http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
물리화학적 처리를 이용한 군부대 사격장 내 중금속 오염 토양의 정화
이상우,이우춘,이상환,김순오,Lee, Sang-Woo,Lee, Woo-Chun,Lee, Sang-Hwan,Kim, Soon-Oh 한국지하수토양환경학회 2021 지하수토양환경 Vol.26 No.5
This study evaluated the feasibility of combined use of physical separation and soil washing to remediate heavy metals (Pb and Cu) contaminated soil in a military shooting range. The soils were classified into two types based on the level of heavy metal concentrations: a higher contaminated soil (HCS) with Pb and Cu concentrations of 6,243 mg/kg and 407 mg/kg, respectively, and a lower contaminated soil (LCS) with their concentrations of 1,658 mg/kg and 232 mg/kg. Pb level in both soils exceeded the regulatory limit (700 mg/kg), and its concentration generally increased with decreasing soil particle size. However, in some cases, Pb concentrations increased with increasing soil particle size, presumably due to the presence of residues of bullets in the soil matrix. As a pretreatment step, a shaking table was used for physical separation of soil to remove bullet residues while fractionating the contaminated soils into different sizes. The most effective separation and fractionation were achieved at vibration velocity of 296 rpm/min, the table slope of 7.0°, and the separating water flow rate of 23 L/min. The efficiency of ensuing soil washing process for LCS was maximized by using 0.5% HCl with the soil:washing solution mixing ratio of 1:3 for 1 hr treatment. On the contrary, HCS was most effectively remediated by using 1.0% HCl with the same soil:solution mixing ratio for 3 hr. This work demonstrated that the combined use of physical separation and soil washing could be a viable option to remediate soils highly contaminated with heavy metals.
이상우,이상철,권오성,배준형,박태준,강진규,이동하,Lee, Sang-Woo,Lee, Sang-Cheol,Kwon, O-Sung,Bae, Jun-Hyung,Park, Tae-Joon,Kang, Jin-Kyu,Lee, Dong-Ha 한국태양에너지학회 2012 한국태양에너지학회 논문집 Vol.32 No.suppl3
In recent years, understanding the dynamics of DC distribution system has become critically important due mainly to the increasing needs for the interconnection of DC distributed generators and the (DC-based) electric vehicle (EV) charging systems. In this paper, the characteristics of the DC grid system connected to the compact proton exchange membrane fuel cell (PEMFC) has been studied. In particular, the voltage and current transient phenomena were measured by varying the load of the DC grid system. Also, the voltage and current ripple were measured at the different load conditions. Our experimental results clearly manifested that the study contributes to the establishment of fundamental method to characterize the small DC grid system including distributed generation.
천수만 해역에서 장마기 담수 방류가 플랑크톤에 미치는 영향
이상우,박철,이두별,이재광,Lee, Sangwoo,Park, Chul,Lee, Doobyoul,Lee, Jaegwang 한국해양학회 2014 바다 Vol.19 No.1
반폐쇄적인 천수만에서 장마기 동안 짧은 기간에 대량의 담수가 집중적으로 유입될 때 발생할 수 있는 플랑크톤 생태계의 영향을 파악하고자 하였다. 이를 위해 장마기 전 후, 2012년 6월 27일부터 9월 1일까지 약 열흘 간격으로 수온, 염분, chlorophyll a 농도, 영양염 농도와 동물플랑크톤의 분포를 조사하여, 이들 각 변수간의 관계를 파악해 보았다. 담수 방류 후 영양염 농도는 약 2배 이상 증가하였고, 그 결과로 나타나는 chlorophyll a 농도 증가는 수 일이 소요되는 것으로 추정되었다. 동물플랑크톤의 경우는 먹이생물인 식물플랑크톤의 증가에 따른 개체수 증가라는 긍정적인 면과 염분 충격으로 인한 사망이라는 부정적인 면이 동시에 나타나는 것으로 여겨졌다. 급격한 염분 하강으로 인한 동물플랑크톤의 사망률은 최고 40%까지 나타났으나, 사체의 빠른 침강으로 신뢰할 만한 사망률 추정에는 한계가 있었다. The impact of freshwater discharge on plankton was investigated in a semi-closed Cheonsu Bay during the rainy season. Field observations for environmental factors (seawater temperatures, salinities, chlorophyll a concentrations and nutrient concentrations) and zooplankton sampling were carried out from June 27 to September 1, 2012 at about 10 days interval. The relationship between the measured parameters and estimated values of zooplankton abundance were examined. After freshwater discharge, nutrient concentrations increased up to about twice and resultant increase of chlorophyll a followed within about 10 days. Both positive and negative impacts on zooplankton were observed. Positive one was the numerical response of zooplankton on this increased food supply, and negative one was the increased mortality caused by sudden changes in salinity. Maximum mortality of copepods was found to be up to 40%, although fast sinking of carcass made it difficult to estimate reliable mortality caused by salinity shock.
$Ar/N_2 및 Kr/N_2$혼합가스의 교류절연파괴 특성
이상우,김인식,이동인,이광식,김이국,Lee, Sang-Woo,Kim, In-Sik,Lee, Dong-In,Lee, Kwang-Sik,Kim, Lee-Kook 대한전기학회 2001 전기학회논문지C Vol.50 No.12
In this paper, the ac breakdown characteristics of pure Ar, Kr and $N_2$ gas with gas pressure range of 58.8-137.3[kPa] under uniform and non-uniform fields were investigated, and the measured values were compared with those In Ar/$N_2$ and Kr/$N_2$ gas mixtures with pressure varying. Summarizing the experimental results, the breakdown voltages of Pure $N_2$gas, under uniform and non-uniform fields, were increased about 4.8 and 1.1 times than those of pure Ar gas, and about 4.4 and 1.2 times than those of pure Kr gas, and the ac breakdown voltage increased with the pressure increasing. The breakdown voltages of Ar/$N_2$ gas mixtures were decreased with decreasing the mixture ratio of Pure $N_2$ gas. In case of Ar(85%)/$N_2$ (15%) and Ar(70%)/$N_2$ (30%) gas mixtures comparing to the pure Ar gas, the breakdown voltages under uniform field were increased about 1.8 and 2.2 times, and under non-uniform field were increased about 1.1 and 1.3 times at the pressure of 101.3[kPa]. Also, in case of Kr(85%)/$N_2$ (15%) and Kr(70%)/$N_2$ (30%) gas mixtures comparing to the pure Kr gas, the breakdown voltages under uniform field were increased about 1.7 and 2.0 times, and under non-uniform field were increased about 1.0 and 1.2 times. Corona inception voltage of Kr(70%)/$N_2$(30%) gas mixtures under non-uniform fields were increased about 1.28 times than those of Ar(70%)/$N_2$ (30%) gas mixtures. In case of practical incandescent lamps, luminous and lifetime of Kr(70%)/$N_2$ (30%) gas mixtures were increased about 1.15 and 1.21 times than those of Ar(70%)/$N_2$ (30%) gas mixtures.
공간통계기법을 이용한 도로교통기반의 온실가스 관한 연구 -대구광역시를 대상으로-
이상우,이승욱,이승엽,홍원화,Lee, Sang Woo,Lee, Seung Wook,Lee, Seung Yeob,Hong, Won Hwa 한국공간정보학회 2014 한국공간정보학회지 Vol.22 No.1
본 연구는 대구광역시의 주요도로를 대상으로 공간통계기법을 이용하여 도로교통 온실가스 배출량을 신뢰성있게 예측하여 추정된 배출량으로 행정구별에 따라 도로교통에서 발생한 온실가스 배출량을 산정하는 것을 목적으로 하였다. 첫째, 주요도로의 교통량 관측지점에서 실시간으로 조사한 교통량을 이용하여 관측지점에서 발생한 온실가스 배출량을 산정하였다. 둘째, 일반 크리깅(Universal Kriging)기법을 이용하여 공간적 상관성에 의해 미 관측지점의 온실가스 배출량을 신뢰성 있게 추정하기 위해 적합한 베리오그램 모델링을 설정하였다. 이에 교차검증을 통하여 적합한 베리오그램 모델과 크리깅 기법의 타당성을 검증하였다. 셋째, 검증된 크리깅 기법으로 미 관측지점의 도로교통에서 발생한 온실가스 배출량을 예측하여 행정구별로 도로교통 온실가스 배출량을 추정하여 산정하였다. 그 결과, 도로교통 온실가스 배출량을 행정구별로 보면 북구가 약 $291,878,020kgCO_2eq/yr$로 가장 많은 온실가스를 배출하는 것으로 나타났다. This study was intended to reliably predict the traffic green house gas emission in Daegu with the use of spatial statistical technique and calculate the traffic green house gas emission of each administrative district on the basis of the accurately predicted emission. First, with the use of the traffic actually surveyed at a traffic observation point, and traffic green house gas emission was calculated. Secondly, on the basis of the calculation, and with the use of Universal Kriging technique, this researcher set a suitable variogram modeling to accurately and reliably predict the green house gas emission at non-observation point suitable through spatial correlation, and then performed cross validation to prove the validity of the proper variogram modeling and Kriging technique. Thirdly, with the use of the validated kriging technique, traffic green gas emission was visualized, and its distribution features were analyzed to predict and calculate the traffic green house gas emission of each administrative district. As a result, regarding the traffic green house gas emission of each administration, it was found that Bukgu had the highest green house gas emission of $291,878,020kgCO_2eq/yr$.
분사구멍의 길이가 수직 분사구멍 내부에서의 3차원 유동에 미치는 영향
이상우,주성국,Lee, Sang Woo,Joo, Seong Kuk 대한기계학회 1998 大韓機械學會論文集B Vol.22 No.9
Effects of a length-to-diameter ratio, L/D, on the three-dimensional flow and aerodynamic loss within an injection hole, which is normally oriented to the mainflow, have been investigated by using a straight five-hole probe. The length-to-diameter ratio of the injection hole is varied to be 0.5 and 2.0 for blowing ratios of 0.5, 1.0 and 2.0. Regardless of the blowing ratio, flows within the hole and at the jet exit are strongly affected by the length-to-diameter ratio. In the case of L/D=0.5, the inside flow is considerably influenced by the mainflow, and the exit flow variation is found to be the greatest. The aerodynamic loss in this case is usually attributed to jet -mainflow interactions. In the case of L/D=2.0, the flow separation and reattachment in the inlet region are completely separated from the complicated exit flow, and the aerodynamic-loss production is mainly due to the inlet flow separation.
2조형(條型) Combine의 이용(利用)에 관(關)한 연구(硏究)
이상우,김성래,Lee, Sang Woo,Kim, Soung Rai 충남대학교 농업과학연구소 1976 Korean Journal of Agricultural Science Vol.3 No.1
도입(導入)된 2조용(條用) Combine으로 통일(統一) 및 밀양(密陽) 15호(號) 수도품종(水稻品種)에 대(對)한 포장수확작업(圃場收穫作業)을 실시(實施)하여 Combine의 작업정도(作業精度) 작업성능(作業性能) 기계적(機械的)인 적응성(適應性)을 파악(把握)하고 한국(韓國)에서의 보급전망(普及展望)을 분석검토(分析檢討)한바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 장간종(長稈種)인 밀양(密陽)15호(號)에 대(對)한 Combine 수확작업(收穫作業)은 수확적기(收穫適期)로 부터 13일(日) 경과후(經過後)까지 5회(回)에 걸쳐 시기별(時期別)로 수확작업(收穫作業)을 실시(實施)한바 완숙도(完熟度)에 관계(關係)없이 수확작업(收穫作業) 양호(良好)하였으며 포장손실율(圃場損失率) 1% 미탈곡율(未脫穀率) 1%로 양호(良好)한 편(便)이었다. 2. 단간종(短稈種)인 통일(統一)에 대(對)한 Combine 수확작업(收穫作業)은 완숙기(完熟期)로 부터 수확시기(收穫時期)가 경과(經過)될 수록 포장손실(圃場損失)이 Fig 1과 같은 경향으로 5.13%에서 10.34%로 증가(增加) 하였으며 통일(統一)벼 수확(收穫)을 위(爲)하여는 기계적(機械的)인 개선(改善)이 많이 요망(要望)되었다. 3. 공시(供試)된 Combine은 장간종용(長稈種用)의 기종(機種)이어서 벼 이삭의 높이가 균일(均一)치 못한 단간종(短稈種) 통일(統一)벼는 탈곡부(脫穀部)의 공급(供給) Chain과 급실(扱室)과의 거리가 커서 급동(扱胴)의 급치(扱齒)에 못미치는 부분(部分)이 있어 미탈곡립율(未脫穀粒率)이 평균(平均) 1.6%이었다. 4. Combine 탈곡부(脫穀部) 급동(扱胴)의 회전수(回轉數)(240~350R.P.M)와 동할미(胴割米)의 관계(關係)는 통일(統一) 및 밀양(密陽)15호(號) 양품종(兩品種) 모두 동할율(胴割率)이 1% 미만(未滿)으로 유의차(有意差)가 없었다. 5. 통일(統一)벼는 벼 이삭이 잎속에 들어 있어 탈곡시(脫穀時) 검불의 양(量)이 많으며 특(特)히 생탈곡시(生脫穀時)는 검불량이 더 많이 생기므로 양곡부(揚穀部) 및 배진구(排塵口)에서 폐쇄현상(閉鎖現像)이 자주 일어남으로 선별(選別) 및 배진장치(排塵裝置)의 개선(改善)이 요망(要望)된다. 6. Combine의 접지압(接地壓)은 $0.19kg/cm^2$로 Fig3과 같은 약(弱)한 지내력(地耐力)의 토양(土壤)에서 Combine의 Track이 25cm 침하(沈下)하여도 Combine의 주행(走行)은 가능(可能)하였다. 그러나 지내력(地耐力)은 지점(地点)에 따라 균일(均一)치 않아 침하(沈下)의 깊이가 균일(均一)치 못함으로 침하(沈下) 5cm정도(程度)에서는 예취(刈取) 높이의 조정(調整)없이 수확작업(收穫作業)이 가능(可能)할 것으로 인정(認定)된다. 7. 관행수확작업(慣行收穫作業)과 Combine 수확작업(收穫作業)의 경제성(經濟性)을 검토(檢討)한바 수도맥작(水稻麥作)의 연간(年間) 사용일수(使用日數)를 40일(日)로 하고 작업일수율(作業日數率) 60% 포장작업효율(圃場作業效率) 56%로 할 때 작업속도(作業速度)를 0.273m/sec로 하여 분석(分析)한바 1일작업시간(日作業時間)을 8시간(時間)으로 할 때 연간부담면적(年間負擔面積)이 4.7ha로 ha당(當) 수확작업비용(收穫作業費用)이 관행수확작업비용(慣行收穫作業費用)과 일치(一致)함으로 통일(統一)벼 수확작업(收穫作業)에 이용(利用)될 수 있도록 Combine의 기계적(機械的)인 보완개량(補完改良)이 뒤따르면 Combine의 흡착(吸着)은 경제적(經濟的)으로 타당(妥當)하다고 인정(認定)된다. 8. 장간종(長稈種)의 현(現) Combine을 통일품종수확(統一品種收穫) 작업(作 This study was conducted to test the harvesting operation of two kinds of rice varieties such as Milyang #15 and Tong-il with a imported two furrow Japanese combine and was performed to find out the operational accuracy of it, the adaptability of this machine, and the feasibility of supplying this machine to rural area in Korea. The results obtained in this study are summarized as follows; 1. The harvesting test of the Milyang #15 was carried out 5 times from the optimum harvesting operation was good regardless of its maturity. The field grain loss ratio and the rate of unthreshed paddy were all about 1 percent. 2. The field grain loss of Tong-il harvested was increased from 5.13% to 10.34% along its maturity as shown in Fig 1. In considering this, it was needed that the combine mechanism should be improved mechanically for harvesting of Tong-il rice variety. 3. The rate of unthreshed paddy of Tong-il rice variety of which stem was short was average 1.6 percent, because the sample combine used in this study was developed on basisof the long stem variety in Japan, therefore some ears owing to the uneven stem of Tong-il rice could nat reach the teeth of the threshing drum. 4. The cracking rates of brown rice depending mostly upon the revolution speed of the threshing drum(240-350 rpm) in harvesting of Tong-il and Milyang #15 were all below 1 percent, and there was no significance between two varieties. 5. Since the ears of Tong-il rice variety covered with its leaves, a lots of trashes was produced, especially when threshed in raw materials, and the cleaning and the trashout mechanisms were clogged with those trashes very often, and so these two mechanisms were needed for being improved. 6. The sample combine of which track pressure was $0.19kg/cm^2$ could drive on the soft ground of which sinking was even 25cm as shown in Fig 3. But in considering the reaping height adjustment, 5cm sinking may be afford to drive the combine on the irregular sinking level ground without any readjustment of the resaping height. 7. The harvesting expenses per ha. by the sample combine of which annual coverage area is 4.7 ha. under conditions that the yearly workable days is 40, percentage of days being good for harvesting operation is 60%, field efficiency is 56%, working speed is 0.273m/sec, and daily workable hours is 8 hrs is reasonable to spread this combine to rural area in Korea, comparing to the expenses by the conventional harvesting expenses, if mechanical improvement is supplemented so as to harvest Tong-il rice. 8. In order to harvest Tong-il rice, the two furrow combine should be needed some mechanical improvements that divider can control not to touch ears of paddy, the space between the feeding chain and the thrshing drum is reduced, trash treatment apparatus must be improved, fore and rear adjust-interval is enlarged, and width of track must be enlarged so as to drive on the soft ground.
이상우,권영봉,Lee, Sang Woo,Kwon, Young Bong 한국강구조학회 1997 韓國鋼構造學會 論文集 Vol.9 No.1
The buckling behavior of the web of steel girders are largely dependent on the size and the location of stiffeners and the restraining effect of top and bottom flanges. Elastic and inelastic buckling analyses based or the Spline Finite Strip Method were executed to study the stiffening effect of the longitudinal stiffener on the web of box girders and to find how the top and bottom flanges had effects on the web, where geometric boundary conditions were limited by both hinged, both fixed and the flange sections. The basic assumption for the longitudinal end boundary conditions was that the vertical stiffeners had the rigidity enough to force nil deflection line on the web panel so that the junction line between web and vertical stiffener was assumed to be hinged boundary conditions. The provisions on the longitudinal stiffener of the plate and box girders of the Korean Standard Highway Bridge Specifications(1995) and AASHTO Specifications(1994 LRFD) were compared with the results obtained numerically for the various longitudinal stiffener size of box girders. Simple equations and design curves for the longitudinal stiffener of the web were proposed for the practical use.
폭방향으로 분사되는 막냉각 제트의 3차원 유동특성 및 압력손실
이상우,김용범,Lee, Sang-U,Kim,Yong-Beom 대한기계학회 1996 大韓機械學會論文集B Vol.20 No.4
Oil-film flow visualizations and three-dimensional flow measurements using a five-hole probe have been conducted to investigate three-dimensional flow characteristics and total pressure losses of a row of film-cooling jets injected in spanwise direction. For several span-to-diameter ratios, experiments are performed in the case of three velocity ratios of 0.5, 1.0 and 1.5. The flow measurements show that downstream flow due to the injection is characterized by a single streamwise vortex instead of a pair of counter-rotating vortices, which appear in the case of streamwise injection, and the vortex strength strongly depends on the velocity ratio. Regardless of the velocity*y ratio, presence of the spanwise film-cooling jets always produces total pressure loss, which is pronounced when the velocity ratio is large. It has also been found that the production of the total pressure loss is closely related to the secondary vortical flow. In addition, effects of the span-to-diameter ratio on the flow and total pressure loss are discussed in detail.