http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
비중격성형술 과정 중 Epinephrine 국소주사에 의해 발생한 심실성 빈맥
이동창,전진영,이흥구,김성원 대한이비인후과학회 2009 대한이비인후과학회지 두경부외과학 Vol.52 No.1
Local infiltration of dilute solutions of epinephrine is widely used for the purpose of hemostasis during septal surgery. However, infiltrated epinephrine often make several side effects such as palpitation, hypertension, or arrhythmia. Also, it may be possible to experience the catastrophic events such as intracranial hemorrhage, pulmonary edema, and cardiac arrest when we use overdose of epinephrine. We experienced ventricular tachycardia in a 36-year-old male with no significant medical history, after submucosal infiltration of epinephrine with appropriate dose during septoplasty. Intraoperative cardiopulmonary resuscitation by external chest compression and direct current cardioversion was successful. We thoroughly evaluated the patient and proved the diagnosis of variant angina pectoris using coronary angiography.
은 나노입자가 부착된 Honeycomb-patterned 소재 합성에 대한 연구
이동창,이종집 한국공업화학회 2016 한국공업화학회 연구논문 초록집 Vol.2016 No.1
Poly(N-vinylcarbazole) (PVK)-cellulose triacetate (CTA) 복합체를 사용하여 Honeycomb-patterned 필름을 형성시킨 뒤 화학적 환원법을 통해 은 나노입자를 부착하는 것을 연구하였다. 복합체는 CTA의 함량을 달리하여 N-vinylcarbazole를 염화철을 개시제로 이용하여 중합시켰다. 얻어진 복합체를 습한 환경에서 휘발성용매로 적셔 수증기를 적용하여 Honeycomb-patterned 기공을 형성시켰다. 복합체 형성 여부는 FT-IR과 UV-Vis spectrometer를 이용하여 확인하였고, Honeycomb-patterned복합체 표면은 SEM Image를 통해 분석하였다. PVK : CTA 가 각각 30 : 70, 50 : 50 일 때, Honeycomb-patterned resin에 은 나노입자가 균일하게 분산되었으며, PVK 함량이 30~50 wt% 보다 높거나 낮으면 은 나노입자의 응집이 발생하였다. 또한 질산은, 환원제, 분산제를 변수로 은 나노입자의 균일도를 조사하였다. 질산은의 농도가 높아짐에 따라 응집이 발생하였고, 환원제도 농도가 높아짐에 따라 국부적인 응집이 발생하였다. 분산제인 Polyvinylpyrrolidone(PVP)의 농도가 낮을 때는 응집이 발생하였고, 농도가 높을 경우에는 은 나노입자가 제대로 부착되지 못하였다.
야자각계 입상 활성탄의 Acid Black 1 염료 흡착에 대한 평형, 동역학 및 열역학 파라미터의 연구
이동창 ( Dong-chang Lee ),이종집 ( Jong-jib Lee ) 한국공업화학회 2016 공업화학 Vol.27 No.6
본 연구는 흡착제로 야자각계 수증기 활성화 입상 활성탄을 사용하여 Acid Black 1 수용액에서의 흡착 거동과 동역학적, 열역학적 파라미터에 대해 회분식 반응을 통해 조사하였다. 흡착변수로는 pH, 초기농도, 접촉시간, 온도를 사용하였다. pH에 대한 영향을 조사하기 위해 pHpzc 값을 분석한 뒤 pH 3-11 범위에서 제거율을 조사하였다. 흡착평형자료로부터 Langmuir, Freundlich, Temkin, Dubinin-Radushkevich 등온 흡착식에 대한 적합성을 평가하였다. 흡착공정에 대한 동역학적 해석을 통해 유사 1차반응식과 유사 2차반응식에 대한 흡착반응의 일치도를 평가하였다. 열역학적 해석을 통해 엔탈피 변화 값과 활성화에너지 값을 조사하여 이를 통해 흡착공정이 흡열반응인지를 확인하였으며, 엔트로피변화 값과 자유에너지 값을 통해 흡착공정의 자발성을 확인하였다. In this study, the adsorption behavior from aqueous solution as well as kinetic and thermodynamic parameters of Acid Black 1 were investigated through batch reaction using coconut shell based granular steam activated carbon. The effects of various adsorption parameters such as pH, initial concentration, contact time, temperature were studied. To confirm the effect of pH, pHpzc measurements were analyzed followed by measuring removal efficiencies of Acid Black 1 at the pH range from 3 to 11. Experimental equilibrium adsorption data were fitted using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich adsorption isotherm. The conformity of adsorption reaction for pseudo first and second order model were evaluated through kinetic analysis. Values of enthalpy change and activation energy were also investigated through thermodynamic analysis and it was confirmed that the adsorption process was endothermic. The spontaneity of adsorption process was evaluated using the values of entropy and Gibbs free energy changes.
은 나노입자가 분산된 Honeycomb-patterned 수지 합성에 대한 연구
이동창(Dong Chang Lee),이종집(Jong Jib Lee) 한국산학기술학회 2017 한국산학기술학회논문지 Vol.18 No.2
Poly(N-vinylcarbazole) (PVK)-cellulose triacetate (CTA) 복합체를 합성하고, 필름에 기공을 형성시킨 뒤, 화학적 환원법을 통해 은 나노입자를 부착하는 것을 연구하였다. PVK-CTA 복합체는 CTA-chloroform 용액에서 iron(III) chloride를 산화제로 사용하여 N-vinylcarbazole을 중합시켜 복합체를 합성하였고, 얻어진 복합체를 습한 환경에서 휘발성용매로 적셔 수증기를 적용하여 macropore가 균일하게 형성된 구조인 Honeycomb-pattern을 형성시켰다. 이후 환원제로 Tetrathiafulvalene (TTF)와 분산제로 polyvinylpyrrolidone (PVP)를 사용하여 화학적 환원법을 이용해 은 나노입자를 Honeycomb-pattern이 형성된 복합체 표면에 부착시켰다. FT-IR과 UV-Vis spectrometer을 이용하여 복합체의 형성여부를 확인하였고, N-vinylcarbazole의 함량을 달리하여 중합한 뒤 복합체의 열 분해도를 측정하였다. Scanning electron microscope (SEM)을 통해 복합체 표면에 형성된 기공의 균일도와 부착된 은 나노입자들의 분산성을 분석하였으며, 환원제, 분산제, 전구체 용액의 농도를 달리하여 은나노입자의 분산성을 확인하였다. Silver nanoparticles were attached by chemical reduction after synthesizing a porous PVK-CTA complex. The PVK-CTA complex was synthesized by polymerizing N-vinylcarbazole in a CTA-chloroform solution using iron(III) chloride as an oxidizing agent and a honeycomb-pattern with uniformly formed macropores was formed by applying steam to the complex surface soaked with a volatile solvent under humid conditions. Using TTF as a reducing agent and PVP as a dispersant, silver nanoparticles were attached on the Honeycomb-pattern complex surface through chemical reduction. The formation of the complex was confirmed by FT-IR and UV-Vis spectrometry, and the degree of thermal decomposition of the complexes was analyzed after N-vinylcarbazole was polymerized by varying its concentration. The uniformity of the pores on the composite surface and the dispersibility of the attached silver nanoparticles were investigated by SEM. The dispersibility of the silver nanoparticles was also analyzed by varying the concentrations of reducing agent and dispersant and precursor.