http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
도상경(Do Sang Gyeong),김기원(Kim Gi Won),이석배(Lee Suk Bae) 대한공간정보학회 2009 한국지형공간정보학회 학술대회 Vol.2009 No.4
GPS위성궤도정보는 GPS데이터 처리에 있어서 가장 중요한 요소이다. 본 연구에서는 GPS기선해석에 있어서 항법메세지에 포함되는 방송력과 IGS에서 제공되는 정밀력에 의한 기선해석의 정확도를 분석하는데 그 목적을 두었다. 이를 위해 경상북도 영주~울진 지역에 연구대상지역을 선정하고, 49개의 기준점에 대하여 GPS관측을 실시하였다. 여기서 얻어진 98개의 기선을 방송력과 정밀력을 사용하여 기선해석을 실시하였으며, 그 결과를 비교분석 하여 거의 비슷한 결과를 얻었다. The orbit ephemeris of GPS is a important element in GPS data Processing. The purpose of this study is accuracy analysis of GPS baseline by using broadcasting ephemeris included in navigation message and precise ephemeris offered by IGS. For this, test area was determined in Youngju -Uljin area, Kyungsangbukdo province and then 49 GPS point surveying was accomplished. Baseline analysis were done in 98 baseline using broadcasting and precise ephemeris and it was achieved that both results were similar after comparison both results.
기반 기술 : 2.4 GHz ISM대역용 소형 0차 공진 안테나
도상인 ( Sang In Do ),유진하 ( Jin Ha Yoo ),이영순 ( Young Soon Lee ) 한국항행학회 2015 韓國航行學會論文誌 Vol.19 No.1
본 논문에서는 2.4 GHz ISM대역에서 사용가능한 0차 공진 안테나를 새롭게 제안하였다. 2.4 GHz ISM대역을 사용하는 Wi-fi, Bluetooth 및 Zigbee와 같은 무선통신 시스템의 경우, 방향에 따른 수신 전계강도의 변화가 없는 전방향 방사패턴을 가진 안테나의 사용을 필요로 한다. 0차 공진 안테나의 경우 안테나의 공진길이에 무관하게 소형화에 유리할뿐만 아니라 전방향성의 방사패턴을 가지는 장점이 있다. 제안된 안테나는 단위 요소셀의 크기를 모노폴 안테나의 공진길이인 λ/4이하로 정하고 이를 2소자로 배열한 형태이다. 설계에 이용된 PCB의 크기는 50×50 mm2이고 제안된 안테 나는 PCB의 중상부에 8×5 mm2의 제한된 크기로 설계 및 제작되었다. 제작된 안테나의 특성측정결과, 임피던스 대역폭(S11≤-10 dB)이 100 MHz (2.4~2.5 GHz)로 크기에 비해 꽤 넓은 대역폭을 얻을 수 있었으며, 해당 대역에서 3 dBi 이상의 높은 이득을 얻을 수 있었다. In the present study, compact 0th order resonant antenna for 2.4 GHz ISM frequency band is newly proposed. In case of wireless communication systems such as wi-fi, bluetooth and Zigbee, antennas with omni-directional radiation pattern are necessary because of the demands for uniformly received electric field strength without variation for direction. It is well-known that 0th order resonant antennas are not only advantageous for miniaturization but also have advantage of maintaining omni-directional radiation pattern. The proposed antenna is composed of two-element array in which the size of unit element should be smaller than λ/4 correspondent to the resonant length of typical monopole antennas The proposed antenna which is placed at middle and upper side of PCB with 50×50 mm2 size is designed and fabricated within limited space of 8×5 mm2. The measured impedance bandwidth (S11 ≤ -10 dB) is about 100 MHz (2.4~2.5 GHz) which corresponds to quite wide bandwidth in comparison with the antenna size, and also the measured peak gain over the passband is more than 3 dBi which is thought to be slightly wider than the other 0th order resonant antenna.
김철영(Kim, Cheol Young),도상경(Do, Sang Gyeong),이석배(Lee, Suk Bae) 한국측량학회 2009 한국측량학회 학술대회자료집 Vol.2009 No.4
GPS 측량의 정확도는 다양한 해석조건에 따라 그 영향을 받는다. 본 연구에서는 위성궤도정보의 정확도와 GPS데이터를 해석하는 사용자의 차이에 따른 결과값의 차이를 알아보고자 하였다. 그 결과 모든 해석조건에서 결과값이 차이를 나타내었지만 특히 사용자에 의한 차이가 가장 큰 것으로 나타났다. The accuracy of GPS surveying is affected by orbit ephemeris, atmospheric and ionospheric effects and also various analysis conditions. In this study, we intended to analyses the difference of the GPS data which are processed by another user under same or other conditions as like GPS data processing software and orbit ephemeris and career of user.
집중소자를 이용하여 특성 조절이 가능한 소형 역-F 안테나
유진하 ( Jin Ha Yoo ),도상인 ( Sang In Do ),이영순 ( Young Soon Lee ) 한국항행학회 2013 韓國航行學會論文誌 Vol.17 No.6
본 논문에서는 집중소자인 캐패시터 및 저항을 사용하여 특성조절이 가능한 소형 역-F 안테나를 제안하였다. 캐패시터는 안테나 크기 및 공진주파수의 조절을 위해 안테나 종단과 접지면 사이에 삽입된다. 반면에 0Ω 저항은 접지면과 단락되는 선로를 대체하여 구현한 것으로써, 단락점의 위치 이동은 안테나의 입력임피던스를 변화시킬 수 있다. 따라서 구조의 재설계 없이도 적절한 캐패시터 및 단락점 위치 선택으로 최적의 안테나특성을 얻을 수 있다. 이와 같은 본 논문의 타당성 검증을 위하여 2.4 GHz 대역용 안테나를 설계 및 제작하여 지그비 무선 리모컨의 한 제품에 적용하였다. 적용된 안테나의 크기는 8.5 × 4.5 mm2이며 재설계 없이도 대역폭 150 MHz 및 이득 2 dBi의 측정결과를 얻을 수 있다. In this paper, a small inverted-F antenna with adjustable characteristics is proposed with use of lumped elements, capacitor and resistor. Capacitor is inserted between end of the antenna and ground for size reduction and tuning of resonant frequency. On the other hand, 0 Ω resistor is replaced as the short line connected to ground. The movement of short point due to use of 0 Ω resistor results in providing variation of input impedance. Therefore optimum characteristics can be obtained only by proper choice of capacitor and short point without redesign of it`s geometry. In order to check the validity, the proposed antenna is designed and fabricated for 2.4 GHz frequency band, and then is applied to a product of Zigbee wireless remote controller. As a result, the size of applied antenna is 8.5 × 4.5 mm2 and it is observed that the measured bandwidth and antenna gain are 150 MHz and 2 dBi respectively without redesign of the antenna.