http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이규영,이찬빈,김수인,이창우,Lee, Kyu-Young,Lee, Chan-Bin,Kim, Soo-In,Lee, Chang-Woo 한국진공학회 2010 Applied Science and Convergence Technology Vol.19 No.5
나노 소재의 물성을 측정하기 위하여 대부분의 연구 그룹에서는 크게 두 가지 분석 기법인 분광학을 이용한 분석과 나노트라이볼로지를 이용한 분석을 사용하고 있다. 분광학을 이용한 분석에는 NMR (Nuclear Magnetic Resonance), IR (Infrared Spectroscopy), Raman 등이 대표적이라 할 수 있고, 나노트라이볼로지를 이용한 분석에는 AFM (Atomic Force Micro-Scope), EFM (Electrostatic Force Microscope), KFM (Kelvin Force Microscope), Nanoindenter 등의 탐침을 이용한 측정 기법이 대표적이다. Nanoindenter는 물질의 탄성 및 경도를 측정 할 수 있으며 이를 통해 물질의 특성을 연구 하는 데에 사용된다. 그러나 이런 Nanoindenter의 압입 실험에서 압입 조건 등의 통제 변수가 다르면 그 결과 값도 바뀌는 것을 볼 수 있는데 본 실험에서는 이런 압입 조건 중 Load - Hold - Unload force의 속도 및 시간을 변화시켜 물질의 탄성계수와 경도가 어떠한 차이를 가지는지 연구하였다. Most research groups used two analysis methods (spectroscopy and nanotribology) to measure the mechanical properties of nano-materials: NMR (Nuclear Magnetic Resonance), IR (Infrared Spectroscopy), Raman Spectroscopy as the spectroscopy method and AFM (Atomic Force MicroScope), EFM (Electrostatic Force Microscope), KFM (Kelvin Force Microscope), Nanoindenter as the nanotribological one. Among these, the nano-indentation technique particularly has been recognized as a powerful method to measure the elastic modulus and the hardness. However, this technique are prone to considerable measurement errors with pressure conditions during measurement. In this paper, we measured the change of elastic modulus and hardness of an Al single crystal with the change of load, hold, and unload time, respectively. We found that elastic modulus and hardness significantly depend on load, hold, and unload time, etc. As the indent time was shortened, the elastic modulus value decreased while the hardness value increased. In addition, we found that elastic modulus value was more sensitive to indent load, hold, and unload time than the hardness value. We speculate that measurement errors of the elastic modulus and the hardness originate from the residual stress during indenting test. From our results, the elastic modulus was more susceptible to the residual stress than the hardness. Thus, we find that the residual stress should be controlled for the minimum measurement errors during the indenting test.
UV 처리에 의한 T-OLED용 산화전극에 적합한 Ag 박막연구: Nano-Mechanics 특성 분석을 중심으로
이규영,김수인,김주영,권구은,강용욱,손지원,전진웅,김민철,이창우,Lee, Kyu Young,Kim, Soo In,Kim, Joo Young,Kwon, Ku Eun,Kang, Yong Wook,Son, Ji Won,Jeon, Jin Woong,Kim, Min Chul,Lee, Chang Woo 한국진공학회 2012 Applied Science and Convergence Technology Vol.21 No.6
Ag (silver)의 일함수는 T-OLED (Top Emission Organic Light Emitting Diode)의 전극소자로 사용하기에는 다소 낮다는 단점이 있다(~4.3 eV). 이러한 단점을 해결하기 위한 대안으로 Ag 박막의 표면을 플라즈마, UV, 열처리를 통하여 일함수를 높이는 연구가 진행되어 왔다(~5.0 eV). 하지만 현재의 대부분 연구는 후 처리된 박막의 일함수에 초점을 맞춰 연구가 진행되어, 박막의 mechanical property에 대한 연구는 매우 부족하며 이는 T-OLED의 효율과 수명 등의 연구에 매우 중요하다. 본 논문에서는 Ag와 $AgO_x$ 박막의 mechanical property에 초점을 맞춰 분석을 실시하였다. Ag는 유리기판 위에 rf-magnetron sputter를 이용하여 100 W의 power에서 150 nm 두께로 증착되었다. 증착된 박막은 UV 램프를 이용하여 다양한 시간동안 UV 처리되었다(0~9분). 본 논문에서는 처리된 박막의 면저항을 측정하고 nano indenter, Scanning Probe Microscopy의 Atomic Force Microscopy mode를 이용하여 mechanical property를 분석하였다. 실험 결과 UV 처리 시간이 3분을 넘어가는 시편과 3분 이내의 시편은 면저항값 및 경도 값에 큰 차이가 있었다. 이러한 결과는 Ag 박막의 후처리에 따른 Ag 물질의 산화 및 결합상태에 따라 박막 내에 존재하는 stress의 영향으로 예상되어진다. The work function of Ag (silver) is too low (~4.3 eV) to be used as an electrode of T-OLED (Top Emission Organic Light Emitting Diode). To solve this weakness, researches used plasma-, UV-, or thermal treatment on Ag films in order to increase the work function (~5.0 eV). So, most of studies have focused only on the work function of various treated Ag films, but studies focusing on nanomechanical properties were very important to investigate the efficiency and life time of T-OLED etc. In this paper, we focused on the mechanical properties of the Ag and $AgO_x$ film. The Ag was deposited on a glass substrate with the thickness of 150 nm by using rf-magnetron sputter with the power was fixed at 100 W and working pressure was 3 mTorr. The deposited Ag film was UV treated by UV lamp for several minutes (0~9 min). We measured the sheet resistance and mechanical property of the deposited film. From the experimental result, there were some differences of the sheet resistance and surface hardness of Ag thin film between short time (0~3 min) and long time UV treatment. These result presumed that the induced stress was taken place by the surface oxidation after UV treatment.
Stress-Strain curve를 이용한 W-C-N 확산방지막 물성 특성 연구
이규영,김수인,박상재,이동관,정용록,정준,이종림,이창우,Lee, Kyu-Young,Kim, Soo-In,Park, Sang-Jae,Lee, Dong-Kwan,Jeong, Yong-Rok,Jung, Jun,Lee, Jong-Rim,Lee, Chang-Woo 한국진공학회 2011 Applied Science and Convergence Technology Vol.20 No.4
본 연구에서는 W (Tungsten)를 주 구성 물질로 불순물 C (Carbon)과 N (Nitrogen)을 첨가한 W-C-N 확산방지막 시편을 제조하였고, $N_2$가스의 유량을 변화시키면서 확산방지막을 제조하여 각각의 시료에 대하여 $600^{\circ}C$열처리를 하였다. 실험 결과 질소유량의 변화에 따라 시편의 탄소성 구간층의 물성 변화율이 시편의 탄성구간보다 큰 것을 알아냈다. 이는 질소 가스의 유량 변화가 시편의 탄소성 구간에 더욱 직접적으로 연관이 되었다는 것을 알 수 있었다. 각 시료는 16회 연속 압입 실험을 실시하여 Stress-strain curve를 통하여 질소 가스의 유량이 2 sccm인 박막의 분산이 적음을 알아냈고, 연속압입을 통하여 얻어진 상항복점의 표준 편차 역시 질소 가스의 유량이 2 sccm인 박막이 가장 적다는 것을 알 수 있었다. Stress-strain curve 분산과 상항복점의 Stress 값의 표준 편차의 크기로 부터 박막의 안정도를 예상할 수 있었으며, 이 결과로부터 W-C-N 박막은 질소 유량에 따라 박막의 안정도가 변화하는 것을 알았다. This paper suggest tungsten (W)-carbon (C)-nitrogen (N) thin films for diffusion barrier that W is main material and C and N are additives. W-C-N thin films are deposited with fixed rates of W and C but with a variation of $N_2$ gas flow and W-C-N thin films are heated at $600^{\circ}C$. From the experimental results, the variation of elastoplastic region for W-C-N thin film measured by tribological property is larger than that of elastic region with a variation of $N_2$ gas flow. These results show that the $N_2$ gas flow is more directly related with the elastoplastic region of W-C-N thin film. Nanoindenting test executed 16 times consecutively and we got the stress-strain curve graphs and hardness datas at each sample. Through the stress-strain curve graphs, the standard diviation of stress-strain curve for $N_2$ gas flow rate of 2.0 sccm is smaller than that of 0, 0.5, 1.5 sccm. Consequently, the physical stability of W-C-N thin film depends on the flow rate of $N_2$ gas.
이규영,정인원,Lee, Kyu Young,Chung, In Won 대한생물정신의학회 2001 생물정신의학 Vol.8 No.2
The pharmacotherapy of schizophrenia exhibits wide inter-individual variabilities in clinical efficacy and adverse effects. Recently, human genetic diversity has been known as one of the essential factors to the variation in human drug response. This suggests that drug therapy should be tailored to the genetic characteristics of the individual. Pharmacogenetics is the field of investigation that attempts to elucidate genetic basis of an individual's responses to pharmacotherapy, considering drug effects divided into two categories as pharmacokinetics and pharmacodynamics. The emerging field of pharmacogenomics, which focuses on genetic determinants of drug response at the level of the entire human genome, is important for development and prescription of safer and more effective individually tailored drugs and will aid in understanding how genetics influence drug response. In schizophrenia, pharmacogenetic studies have shown the role of genetic variants of the cytochrome P450 enzymes such as CYP2D6, CYP2C19, and CYP2A1 in the metabolism of antipsychotic drugs. At the level of drug targets, variants of the dopamine $D_2$, $D_3$ and $D_4$, and 5-$HT_{2A}$ and 5-$HT_{2C}$ receptors have been examined. The pharmacogenetic studies in schizophrenia presently shows controversial findings which may be related to the multiple involvement of genes with relatively small effects and to the lack of standardized phenotypes. For further development in the pharmacogenomics of schizophrenia, there would be required the extensive outcome measures and definitions, and the powerful new tools of genomics, proteomics and so on.
Silicone Index Tooth Tray를 이용한 인상체의 체적안정성에 대한 연구
이규영,정승미,심준성,최병갑,이근우,Lee Kyu-Young,Jeong Seung-Mi,Shim June-Sung,Choi Byung-Gap,Lee Keun-Woo 대한치과보철학회 2005 대한치과보철학회지 Vol.43 No.5
Statement of problem: Silicone Index Tooth Tray impression system which does not use gingicord has a shortcoming. It takes time to remove internal wall of Silicone Index Tooth Tray for space of wash impression material. Purpose: This study was to evaluate whether providing certain space to impression body can prevent from doing complicated laboratory work. Material and methods: After mounting metal dies with shoulder and chamfer margins arbiturarily, SITT was produced using $Blu-mousse^(R)$. In one experimental group, wash impression was taken using $Fit-tester^(R)$ without removing interior surface of SITT and in the other group, wash impression was taken using $Fit-tester^(R)$ providing 0.5mm space in the SITT and then compared the differences in two groups. Results: 1. There was no significant difference between a group which did not allow space and a group which granted equal 0.5mm space. 2. There was no significant difference between gingival diameter, occlusal diameter of metal die that has shoulder margin and gingival diameter, occlusal diameter of metal die that has chamfer margin. 3. There was no significant difference between a group which did not take pick-up impression and a group which took pick-up impression through relining method using SITT 4. There was no significant difference between a group that poured immediately after taking primary impression and a group that poured after removing poured stone die. Conclusions: When taking an impression of an abutment using SITT impression system, it is considered to obtain clinically identical results between a group that did not grant a 0.5mm space within SITT for wash impression and a group which invest a space. Furthermore, it is considered possible to produce an individual die through secondary pouring.
이규영,이청희,조광헌,Lee, Kyu-Young,Lee, Chung-Hee,Jo, Kwang-Hun 대한치과보철학회 1998 대한치과보철학회지 Vol.36 No.3
This study was designed to compare the smoothness by glazing method with that by polishing method after 48 specimens of Ceramco II block, one of porcelain materials used for PFM, were baked according to the manufacturer's directions. The specimens were roughened with new green stone at 15,000rpm for 30 seconds and sandblasted with $25{\mu}$aluminum oxide for 15 seconds. They were divided into 4 groups at random, and 4 groups were prepared as follows : Group I : specimens were autoglazed and overpolished with polishing system. Group II : specimens were polished with only polishing system. Group III : specimens were glazed after adding glazing liquid, vitachrom 'L'-fluid (vita zahnfabrik co. Germany) to the rough surface Group V : specimens were just autoglazed Using the surface roughness tester, Ra, Rmax. and Rz were estimated 5 times per specimen, and recording process of mean value was repeated 3 times. The results were as follows : 1. The Ra of group I and group II was lower than group III and group IV (p<001). 2. There was lower value of Rz in group I and group II than group III and group IV (p<001). 3. The Rmax of group I (overpolished with polishing system after autoglazing) and group II (polished with only polishing system) was lower than group III (glazed after adding glazing liquid) and group IV (autoglazed) (p<001). 4. There was not a statistically significant difference between group I and II and between group III and IV (p>001). 5. The roughness was increase in order of group I, II, III, IV in SEM
이규영(Lee, Kyu Young) 한국외국어대학교 동유럽발칸연구소 2013 동유럽발칸연구 Vol.37 No.-
독일의 공적개발협력은 독일의 분단 직후부터 기원한다. 독일의 공적개발협력은 현실주의적 관점에서 시작하였으나, 통일 이후 인류의 보편적 가치를 강조하는 입장으로 선회하였다. 다만 국가이익의 구현이라는 측면은 다른 나라들과 마찬가지로 완전히 배제할 수 없다. 독일 공적개발협력의 유형은 양자간 협력을 위주로 실행하되, 유럽연합을 포함한 다자간 협력도 병행하고 있다. 이러한 협력유형은 아시아의 경우에도 그대로 적용되며, 아시아를 보는 독일의 관점은 매우 복합적인 특성을 보인다. Germany's Official Development policy began after its division. While Germany's official development cooperation based on realistic point of view at the beginning, it was changed gradually into the new dimension emphasizing on universal values of human society. Germany's official development cooperations are conducting mainly by two types, i.e. bilateral cooperation and multilateral cooperation (including cooperation through the European Union). These types have been adapted also in Asia and the Germany's official development cooperation toward Asia has been characterized by complicated features which are different from those cases which are implemented in other continents.
이규영(Kyu-Young Lee) 한국정치학회 1995 한국정치학회보 Vol.28 No.2
서구의 사회과학은 현실사회주의체제를 연구함에 있어서 체제의 외부구조 또는 가시적 변화에만 집착했다. 사회주의의 안정성과 체제의 통제능력이 과대평가되었다. 그러나 한 국가가 사회의 일반의지와 대립될 경우 체제의 유형과 관계없이 양자는 불가피하게 상호 갈등관계에 빠진다. 사회주의체제하에서도 궁극적으로는 당-국가에 대립되는 소위 명백하거나 또는 잠재적인 대항체가 형성될 수 있다. 또 구(舊)동구정권들은 국민들을 ‘전체적’으로 지배하지 못했다. 전체주의적이었던 것은 사회가 아니고 사회주의 국가기구였을 뿐이다. 시민사회의 개념은 오랜 역사적 전통을 지닌다. 동시에 의미상, 내용상의 변화를 겪어왔다. 특히 현실사회주의 변혁과정은 그람시의 진지적 입장이 상당히 설득력을 지니고 있다. 그람시의 국가-시민사회의 이분법, 즉 현실사회주의 체제의 변혁은 소위 정치사회 지배를 둘러싼 국가와 시민사회간의 헤게모니 다툼의 결과이기도 한다. 시민사회는 단순히 사회적 자기 조직화 또는 방어차원에서만 논의되었다. 아래로부터의 체제극복적 개혁압력이나 ‘국가’를 대체할 수 있는 시민사회의 정치화 가능성은 배제되었다. 그러나 현실사회주의체제하에서 국가의 이행능력 약화와 외부 영향을 자체 내에 흡수할 수 없는 체제의 탄성능력 약화는 시민사회의 정치사회화 계기를 부여했다. 폴란드의 시민사회는 1975년 KOR의 결성이후 1980년 연대노조의 조직을 계기로 구체화되었다. 독자적인 사회-정치적 동반자이며 ‘제2의’ 사회를 수립하였다. 그런데 폴란드의 사례는 기존의 시민사회 논의 범주로 분석될 수 없는 특정들이 있다. 그람시적 도식은 국가 또는 정치사회를 시민사회에 근거하는 사회ㆍ정치세력들이 단계적이고 점진적으로 점령해가는 상황을 설명하지 못한다. 즉 정치사회는 국가와 항상 동일할 수 없다. 당-국가의 독점적 전유물이 아니다. 폴란드의 경우처럼 정치사회에 대한 일당국가의 통제 능력이 약화된다면, 시민사회의 정치사회 점령가능성은, 그 도전형태인 혁명, 개혁, 혁명적 개혁과 무관하게 완전히 개방되어있다. 그람시적 의미와는 달리 정치사회는 국가와 시민사회간의 협상대상이다.
몬테카를로 전산해석을 이용한 콘크리트 코어시료의 직경과 밀도에 따른 보정인자 계산
이규영(Kyu-Young Lee),강보선(Bo Sun Kang) 한국방사선학회 2020 한국방사선학회 논문지 Vol.14 No.5
Concrete is one of the most widely used materials as the shielding structures of a nuclear facilities. It is also the most generated radioactive waste in quantity while dismantling facilities. Since the concrete captures neutrons and generates various radionuclides, radiation measurement and analysis of the sample was fulfilled prior to dismantle facilities. An HPGe detector is used in general for the radiation measurement, and effective correction factors such as geometrical correction factor, self-absorption correction, and absolute detector efficiency have to be applied to the measured data to decide exact radioactivity of the sample. Correction factors are obtained by measuring data using a standard source with the same geometry and chemical states as the sample under the same measurement conditions. However, it is very difficult to prepare standard concrete sources because concrete is limited in pretreatment due to various constituent materials and high density. In addition, the concrete sample obtained by core drill is a volumetric source, which requires geometric correction for sample diameter and self absorption correction for sample density. Therefore in recent years, many researchers are working on the calculation of effective correction factors using Monte carlo simulation instead of measuring them using a standard source. In this study we calculated, using Geant4, one of the Monte carlo codes, the correction factors for the various diameter and density of the concrete core sample at the gamma ray energy emitted from the nuclides 152Eu and 60Co, which are the most generated in radioactive concrete. 콘크리트는 원자력 시설의 차폐용 구조물로 광범위하게 사용되고 있는 재료이다. 하지만, 시설의 해체 시 양적으로 가장 많이 발생하는 방사성 폐기물이기도하다. 콘크리트는 중성자를 포획하여 다양한 방사성 핵종을 생성하기 때문에 해체 전에 시료를 채취하여 방사능 측정 및 평가를 수행해야 한다. 측정은 주로 HPGe 검출기를 이용하는데 시료의 정확한 방사능 판정을 위해는 기하학적 보정인자, 자가흡수 보정인자, 계측기의 절대효율 등 효과적인 보정인자를 측정치에 반영해야 한다. 보정인자는 기하학적 및 화학적 상태가 실제 시료와 동일한 표준시료를 이용해서 동일한 측정조건 하에서 획득한다. 하지만, 콘크리트는 다양한 구성물질과 높은 밀도로 전처리가 제한적이므로 콘크리트 표준시료를 제작하는 것은 매우 어렵다. 또한 코어드릴(core drill)을 사용하여 채취되는 콘크리트 시료는 체적선원이므로 직경에 대한 기하학적 보정과 밀도에 대한 자가흡수에 대한 보정이 필수적이다. 따라서, 최근에는 많은 연구자들이 표준선원을 제작 후 측정하는 대신 몬테카를로 전산모사(Monte Carlo simulation)을 이용하여 효과적인 보정인자들을 계산하는 연구를 수행하고 있다. 본 연구에서는 Monte Carlo code 중 하나인 Geant4를 이용하여 방사화 콘크리트에서 가장 많이 생성되는 핵종인 152Eu, 60Co에서 방출되는 감마선 에너지에 대한 콘크리트 코어시료의 직경과 밀도에 따른 보정인자를 산출하였다.
이규영(Kyu Young LEE, 李奎榮) 신아시아연구소(구 신아세아질서연구회) 2014 신아세아 Vol.21 No.2
인간사회에서 '정치'현상은 결코 배제될 수 없는 필수적이고 당연한 현상이다. 인간사회가 긍정적이든 부정적이든 발전과 변화를 시도하고 경험하는 과정에서 정치의 역할이 가장 핵심적인 까닭이다. 한국 정치에 대한 낮은 신뢰도는 분명히 어제와 오늘에 형성되지 않았다. 한국 국민들의 정치와 정치체제에 대한 불신, 대표적으로 정파와 특정 집단과 보스를 중심으로 한 대립과 갈등은 시급해 해결되어야 할 과제이다. 낮은 신뢰와 높은 불신은 정책의 타당성이나 국정운영의 효율성 제고로만 해결될 수 없다. 정책과 국정운영 방식은 시대의 흐름과 환경의 변화에 따라 계속 새로운 모습으로 거듭나야 하기 때문이다. 한국정치에 대한 신뢰를 끌어올리기 위하여 보다 본질적 접근이 요청된다. 한국정치가 국민들로부터 신뢰를 회복하는 방안은 정치체제의 효율성을 제고하거나, 국민들의 일차적 관심사인 복지증진문제, 맑고 투명한 정책결정과정과 결과 제고, 양당제로부터 진보정당의 재도약 또는 재구성을 통한 국민관심의 제고 등 여러 가지로 모색될 수 있다. 그러나 근본적으로 한국 정치체제와 제반 정치행위에 대한 신뢰는 윤리적 차원에서 개선되어야 한다. 윤리적 차원에서 신뢰회복시도는 단기간에 긍정적 효과로 이어지기 어렵지만, 완급을 조절하면서 국민들의 마음을 얻을 수 있다면 가장 현실적 대안이 될 수 있다. Politics' can never be excluded from human society because politics plays the most essential role in development and the transition process regardless of whether that role is positive or negative. The Korean public distrusts politics and the political system, but this low trust is not a recent phenomenon. Confrontations and conflicts based on particular groups and political factions must be urgently addressed and solved. Low credibility and high distrust cannot be fixed with proper policies and improving the efficiency of government administration. National policy and government administration need to be continuously adjusted to fit the environment and changing trends. To increase the level of trust in Korean politics, a fundamental approach is required. There are several ways to restore public trust in Korean politics, such as improving the efficiency of the political system or addressing welfare issues, the primary concerns of the people, along with creating a clear and transparent decision-making process, and reforming or restructuring the current two-party system. Fundamentally, however, the restoration of trust in the Korean political system requires ethical behavior. Restoring trust by improving ethics will be difficult to achieve in a short period of time; it is the most realistic alternative over time, however.