http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤진영,임범수,Yoon, Jin-Young,Lim, Beom-Soo 한국군사과학기술학회 2011 한국군사과학기술학회지 Vol.14 No.6
If the flow of booster gas which is exhausted to the rear part of a canister is properly restricted in the canister of a hot-launch system, the resultant pressure built up in the canister provides additional force to accelerate the missile to a required launch velocity. These thrust augmentation performances can be controlled through the configuration design of baseplate orifices. In this paper, the simple technique to analyze the thrust augmentation performances of baseplate orifices is suggested and the thrust augmentation characteristics by its various configurations are compared. According to the initial displacement of a missile, the inner pressure of a canister is measured from scaled cold flow tests, and the discharge coefficient of baseplate orifices is calculated. Then the thrust augmentation in a canister is simulated by applying these discharge characteristics to the AMESIM software for launch dynamics.
동시 경화 제작기법을 적용한 이종 수지 복합재의 열적/기계적 특성에 관한 실험적 연구
윤진영,최지덕,박철용,김영규,Yoon, Jin-Young,Choi, Jiduck,Park, Cheolyong,Kim, Younggyu 한국군사과학기술학회 2020 한국군사과학기술학회지 Vol.23 No.5
Individual curing process of each layer in two resin composites can be caused the separation between two layers. In this study, co-curing process for two resin composites is suggested to improve the inter-layer bonding. Glass fiber reinforced composites with phenolic and epoxy resins were manufactured by co-curing process, and several types of glass/phenolic composites were considered to confirm the application on two resin composites. Experiments for smoke resistance, scratch resistance and flexural strength were carried out to verify requirements corresponding to thermal and mechanical environments. It was validated that two resin composites with phenolic resin impregnated prepreg exhibits good thermal and mechanical characteristics, and it can serve as highly effective composite structures in aerospace and many industry areas.
윤진영,최덕균,Yoon, Jin-Young,Choi, Duck-Kyun The Korea Association of Crystal Growth 1997 韓國結晶成長學會誌 Vol.7 No.1
본 연구는 수소로 희석된 $B_2H_6$를 도판트 소스 가스로 사용하여 이온 질량 주입(ion mass doping)을 하였을 때 다결정 박막의 전기적 특성과 도판트의 활성화시 방사 손상(radiation damage)의 효과에 대하여 고찰하였다. 다결정 박막에서 보론(boron)의 SIMS 분석과 컴퓨터 시뮬레이션인 TRIM92를 비교해서 가장 주입 확률이 높은 이온의 종류는 $B_2H_x\;^+$(x=1, 2, 3‥‥) 형태의 분자 이온임을 알았다. 높은 에너지의 질량 이온 주입 결과 시간에 따라 변화하는 비정질화된 층의 분율이 다결정 박막 내에 연속적인 비정질 충으로 존재하였다. 주입 이온의 질량 분리가 일어나지 않는 이온 질량 주입법(ion mass doping technique)에 의해 비정질화는 유발된다. 손상된 시편의 중간 열처리 온도 범위에서 도판트 활성화 거동과 역 열처리(reverse annealing) 효과가 관찰되었다. 이와 같은 연구의 결과 p-채널 다결정 박막 트랜지스터의 오프 스테이트(off-state) 전류는 방사 손상(radiation damage)에 의존한다. The electrical properties of polysilicon thin films implanted with $B_2H_6$ diluted in $H_2$ as dopant source using ion mass doping technique and the effect of radiation damage on the dopant activation behavior were investigated. Comparing the SIMS profiles of boron in polysilicon films with that obtained from computer simulation using TRIM92 the most probable ion species were $B_2H_x\;^+$(x=1, 2, 3‥‥) type molecular ions. As a result of the Implantation of energetic massive ions, a continuous amorphized layer was created in polysilicon films where the fraction of amorphized layer varied with doping time. This amorphization comes from the fact that mass separation of implanting species is not employed in this ion mass doping technique. In the dopant activation behavior, reverse annealing phenomenon appeared in the intermediate annealing temperature range for a severely damaged specimen. The experimental result showed that the off-state current of the p-channel polysilicon thin film transistor is dependent on the degree of radiation damage.
윤진영(Jin-Young Yoon),박정선(Jungsun Park) 한국항공우주학회 2008 韓國航空宇宙學會誌 Vol.36 No.7
고분자 전해질 연료전지 스택의 성능향상과 안전성 확보를 위하여 스택의 체결하중으로 인한 가스켓과 GDL의 구조적 거동을 살펴보았다. 가스켓 구조 해석의 경우 하중과 변위의 초탄성 거동을 표현하기 위하여 Mooney-Rivlin의 변형률에너지 함수를 사용하였으며, 재료 물성을 구하기 위하여 단축 인장 및 등가 이축 인장 시험을 수행하였고 유한요소 해석과 비교하였다. GDL의 물성측정을 위하여 압축 하중의 변화에 따라 두께변화를 측정하였고 단위 셀을 제작하여 하중의 변화에 따른 채널의 압력차를 측정하였다. 실험 데이터를 바탕으로 채널 단면적의 변화를 계산, 유한요소 해석결과와 비교하였다. In this paper, structural behavior of Gasket and GDL of a PEMFC stack is studied to improve the performance and to secure the safety. In the Gasket analysis Mooney-Rivlin strain energy function is used to consider hyperelasticity of load and displacement. The material properties is determined by testing specimens of the gasket at uni-axial and equi-biaxial mode and compared with finite element analysis results. By measuring a thickness change, the material property of GDL is determined. The pressure drop of a unit cell is measured along the channel for the clamping force. A cross sectional change of channel base on the experimental data is obtained experimentally and compare with FEM analysis results.
윤진영 ( Jinyoung Yoon ),김석중 ( Sukjoong Kim ),이범석 ( Bumsuk Lee ),황병연 ( Byung-yeon Hwang ) 한국정보처리학회 2012 한국정보처리학회 학술대회논문집 Vol.19 No.1
트위터는 대표적인 소셜 네트워크 서비스이며 스마트 기기의 발달로 사용자 수뿐만 아니라 생성되는 트윗의 수도 지속적으로 늘고 있다. 또한 트위터는 인증과정을 통하여 API 요청을 제한해 데이터의 수집이 어렵기 때문에 트위터 기반 연구를 위해서는 빅 데이터를 처리하기 위한 분산처리 기술이 요구된다. 본 논문에서는 네트워크로 연결된 다수의 클라이언트를 이용해 계정과 트윗의 수집에 용이하고 수집한 데이터를 분석할 수 있는 기능까지 추가한 분산처리 시스템인 DiSAnT을 소개한다.