http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤영찬,이택성 한국정밀공학회 2023 한국정밀공학회지 Vol.40 No.8
For the hydraulic cylinder system of construction equipment to function normally, the hydraulic oil should not leak under high pressure, and the leakage begins with various seals of damage. The frictional heat caused by the reciprocating motion inside the cylinder increases the temperature of the oil, which affects the aging of the seal materials inside the cylinder, thereby accelerating seal damage. The purpose of this study is to confirm the effect of reducing heat generation by applying umbrellatype micro-dimples on the surface of a wear ring, and to find out the performance according to changes in shape and density of the dimples. Dimples were manufactured by injection molding and the core for injection was made by profile grinding processing. The structural safety of the wearing with dimples was examined by structural analysis, and the temperature changes of the dimple were measured during pin-on-disc friction experiments. It was confirmed that the dimple was effective in reducing the amount of heat generated, and the heat generation decreased as the size and density of the dimple increased.
Electrosorption kinetic studies of copper ions on chitosan complexed electrodes
윤영찬,이동희,류재춘,김영호 한국공업화학회 2016 한국공업화학회 연구논문 초록집 Vol.2016 No.0
중금속은 체내에서 분해되지 않으며 축적되어 다양한 질병을 야기한다. 구리는 체내에 축적될 경우 위장과 신장을 손상시키며 혈색 소증의 원인이 된다. 폐수 내 포함된 구리이온을 제거하기 위해 현재 많은 기술들이 사용되고 있다. 본 연구에서는 키토산을 사용하여 복합 전극을 제조하였고, 흡착 전극의 물리 화학적 특성을 분석하였다. 제조된 복합 전극을 이용해 수용액 상에서 구리 제거를 위한 전기흡착을 진행하였다.
Chitosan 첨가와 template 종류에 따른 SAPO-34 촉매 특성 분석 및 DTO 반응 연구
윤영찬,최기환,김효섭,이동희,박주식,김영호 한국공업화학회 2015 한국공업화학회 연구논문 초록집 Vol.2015 No.1
DME(dimethyl ether)는 천연가스나 석탄 또는 바이오매스 등의 다양한 에너지원으로부터 제조할 수 있을 뿐만 아니라 연소시 오염물질의 발생량이 적은 친환경적 연료중의 하나로 주목받고 있다. 현재 DME의 이용 기술로서 DME로부터 올레핀 제조(DTO ; DME to olefins)반응이 촉매 개발과 함께 많은 연구가 진행되어 오고 있다. DTO 반응의 전형적인 촉매로서 SAPO-34는 경질 올레핀 선택도가 매우 높은 촉매로 알려져 있다. 본 연구에서 메조세공을 가지는 SAPO-34 촉매를 제조하기 위해 mesopore-generating agent로 chitosan을 사용하였고 template 종류가 SAPO-34 촉매에 미치는 영향을 알아보기 위해 morpholine과 TEAOH를 template로 사용하여 수열합성법을 통해 제조하였다. 제조된 SAPO-34 분자체는 Scanning electron microscopy(SEM)와 temperature-programmed NH<sub>3</sub> desorption을 사용하여 특성 분석하였다.
메조세공 형성을 위해 Chitosan이 첨가된 SAPO-34 촉매의 DTO 반응 특성
윤영찬,최기환,김경배,이동희,김효섭,박주식,김영호 한국공업화학회 2015 한국공업화학회 연구논문 초록집 Vol.2015 No.0
석유 자원의 고갈과 비싼 가격 문제로 인해 석유와 나프타로부터 경질 올레핀을 제조하는 공정은 경제적이지 못하다. 반면, DME(dimethyl ether)로부터 경질 올레핀을 제조하는 DTO(dimethyl ether to olefin)공정은 석유를 사용하지 않고 경질 올레핀을 생성하는 혁신적인 공정이다. DTO 반응에서 SAPO-34 촉매는 경질 올레핀 선택도가 매우 높은 장점을 갖는다. 본 연구에서는 메조세공 형성을 위해 mesopore-generating agent로 chitosan을 사용하여 SAPO-34 촉매를 제조하였다. 제조된 SAPO-34 촉매는 scanning electron microscopy(SEM),temperature-programmed NH3 desorption와 N2 adsorption-desorption을 사용하여 특성 분석되었다. 또한, 제조된 촉매들의 성능 평가를 위해 DTO 반응을 실시하였고 촉매의 수명과 경질 올레핀 선택도를 관찰하였다.