http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
J2ME 기반 모바일 응용 SW의 단위 테스트 도구 개발
윤석진 ( Seok-jin Yoon ),김철홍 ( Chul-hong Kim ),신규상 ( Gyu-sang Shin ) 한국정보처리학회 2007 한국정보처리학회 학술대회논문집 Vol.14 No.2
최근 PDA와 휴대폰 등 모바일 디바이스의 급격한 증가로 모바일 응용 SW 개발이 주목을 받고 있다. 다양한 방법과 기술들이 모바일 응용 SW 개발을 지원하기 위해 개발되었으며, 다양한 언어가 J2ME 또는 Brew 플랫폼에서 SW 개발을 위해 제시되었다. 그러나 이러한 환경에서 SW 테스트는 큰 관심을 받지는 못하였다. 그 동안 모바일 응용 SW의 기능 테스트에 대한 몇몇 연구 성과들이 발표되어 왔고, 성능, 사용성, 스트레스 테스트 등에 관련된 연구들이 주로 진행되어 왔다. 특히 단위 테스트는 개발자의 역량에 의존하는 방식으로 진행되어 왔다. 본 논문에서는 모바일 응용 SW를 비즈니스로직 측면과 GUI 측면으로 구분하여 각각에 대한 단위 테스트 방법을 제시하고자 한다.
윤석진(Yoon Seok Jin) 사회복지법제학회 2018 사회복지법제연구 Vol.9 No.2
정부의 장애등급제 개편은 지체할 수 없는 국가적 과업이 되고 있다. 이를 위해 지난 정부에서 실패했던 상황논리를 극복하고 구체적인 입법개선이 요구된다. 법령 또는 법령에 내재되어 있는 제도개선이 있게 되면 관련 입법의 제정과 개정이 수반된다. 이러한 과정에서 객관적이고 과학적인 방법을 통해 입법의 영향을 분석·평가하고 그 결과를 해당 법령에 반영하여 최적의 입법대안을 창출하여야 한다. 여기에서 고려되어야 하는 것이 법치주의적 관점에서 논의되는 법합치성과 입법의 체계정당성 원리이다. 이는 입법과정에서 준수되어야 할 헌법원리이자 입법기술이다. 본 논문에서는 규범적 영향분석기법의 하나인 법합치성 원리에 따라 장애등급제 개편에 따른 관련 법령을 전수조사하였고 향후 법제개선을 위한 과제를 도출하였다. 그 결과 정부가 추진하고 있는 중·경증장애 체계에 대한 심오한 고민과 전문적 조정전략이 필요한 법령 21건과 단순히 중증·경증장애정도로 개편이 가능한 사례 15건을 발굴하였다. 이러한 결과는 장애등급제의 개편이 「장애인복지법」에서 그치는 것이 아니라 수많은 관련 입법의 정비까지 함께 도모되어야 할 필요가 있음을 말하고 있는 것이다. 이를 위해 본 논문에서는 장애등급제 개편에 따른 가장 바람직한 입법대안의 정립을 위해 고려되어야 할 정책사안을 제시하였다. The reform of the disability grade system of the government is a national task that can not be delayed. For this reason, it is necessary to overcome the logic of the situation that failed in past governments and to improve concrete legislation. If there are improvements in the laws and regulations or the systems inherent in laws and regulations, the establishment and revision of related legislation is accompanied. In this process, we must analyze and evaluate the impact of legislation using objective and scientific methods, reflect the results in that law, and create optimal legislation alternatives. It should be considered here and is the principle of legitimacy of the law conformance performance system being discussed from the point of view of legalism. This is the constitutional principle to be observed in the legislative process, it is legislative technology. In this thesis, we investigated all related laws and regulations based on reform of the disability grade system based on the principle of law conformity, which is one of analytical methods of normative influence, and derived tasks for improving future legislation. As a result, we discovered 21 laws and ordinances that require profound distress and professional coordination strategies for the severely handicapped and mild disability system that the government is pursuing. In addition, we identified 15 cases that could be reorganized as simply severe or mild disability. These results say that the reorganization of the disability grade system should not necessarily end with the 「Act on Welfare of Persons with Disabilities」 but also need to be involved together until the establishment of many relevant legislation. For this reason, this paper presented factors to be considered for the formula of the most alternative legislative options by reforming the disability grade system
후륜 서브프레임 용접 설계 변수에 따른 용접민감도 분석
윤석진(Sukjin Yoon),이계호(Kyeho Lee),김요셉(Yoseb Kim),김태진(Taejin Kim) 한국자동차공학회 2022 한국자동차공학회 학술대회 및 전시회 Vol.2022 No.11
Each Part of the rear subframe for an automotive is joined by a welding. The quality of welded joint may be dispersion depending on various conditions such as operator proficiency, work environment, etc., and this effect may cause differences in the design life of the initially predicted product. In this study, fatigue analysis of the rear subframe welded joint part was performed using FEMFAT which a commercial fatigue analysis program. In addition, the weld sensitivity analysis considering weld quality according to the shape variable of the welded joint part was performed, and fatigue life changes at positions of the major vulnerable parts were studied.
윤석진 ( Seokjin Yoon ),김현수 ( Hyeonsoo Kim ) 한국정보처리학회 2007 한국정보처리학회 학술대회논문집 Vol.14 No.1
본 연구는 소프트웨어 컴포넌트 플랫폼에 독립적으로 컴포넌트를 개발하여 소프트웨어 간에 상호 운용성과 이식성을 확보할 수 있는 컴포넌트 모델변환 기술과 소프트웨어 아키텍쳐를 기반으로 컴포넌트를 조립하여 소프트웨어를 생산할 수 있는 기술을 개발하는 것이다. 본 연구에서는 이러한 기술을 개발하기 위해 세부적으로 영역 전용 아키텍쳐 기술언어를 개발하고 아키텍쳐 기술 언어를 이용하여 개발된 응용 모델을 모델 기반 개발 방법으로 변환할 수 있는 변환 기술과 코드 생성 기술, 그리고 아키텍쳐를 구성하는 컴포넌트를 조립해 낼 수 있는 컴포넌트 조립 기술을 개발하고자 한다. 본 연구를 통하여 개발될 최종 결과물은 영역 아키텍쳐 기반 소프트웨어 개발 시스템 시제품의 개발이다.
윤석진(Suk Jin Yoon),박종규(Jong Kyu Park),이기동(Gi Dong Lee),서오석(Oh Suk Seo),김헌영(Heon Young Kim) 한국소성가공학회 2010 한국소성가공학회 학술대회 논문집 Vol.2010 No.10
Press quenching process is an advanced metal forming method for manufacturing automotive parts with high strength and minimum spring back. In this process, the cooling time and conditions is the most important parameters. This study investigates the thermal deformation and mechanical properties of tubular beam with press quenching process. In order to compare with experimental result, a finite element analysis of the press quenching process coupled with phase transformation and heat transfer.