http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황화 열처리 온도에 따른 Cu<sub>2</sub>ZnSn(S,Se)<sub>4</sub> 박막의 합성 및 특성 평가
유영웅,홍창우,강명길,신승욱,김영백,문종하,이영종,김진혁,Yoo, Yeong Yung,Hong, Chang Woo,Gang, Myeng Gil,Shin, Seung Wook,Kim, Young Baek,Moon, Jong-Ha,Lee, Yong Jeong,Kim, Jin Hyoek 한국재료학회 2013 한국재료학회지 Vol.23 No.11
$Cu_2ZnSn(S_x,Se_{1-x})_4$ (CZTSSe) thin films were prepared by sulfurization of evaporated precursor thin films. Precursor was prepared using evaporation method at room temperature. The sulfurization was carried out in a graphite box with S powder at different temperatures. The temperatures were varied in a four step process from $520^{\circ}C$ to $580^{\circ}C$. The effects of the sulfurization temperature on the micro-structural, morphological, and compositional properties of the CZTSSe thin films were investigated using X-ray diffraction (XRD), Raman spectra, field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM). The XRD and Raman results showed that the sulfurized thin films had a single kesterite crystal CZTSSe. From the FE-SEM and TEM results, the $Mo(S_x,Se_{1-x})_2$ (MoSSe) interfacial layers of the sulfurized CZTS thin films were observed and their thickness was seen to increase with increasing sulfurization temperature. The microstructures of the CZTSSe thin films were strongly related to the sulfurization temperatures. The voids in the CZTSSe thin films increased with the increasing sulfurization temperature.
유영웅,이해원,허홍석,윤대섭 한국경영과학회 2015 한국경영과학회 학술대회논문집 Vol.2015 No.4
업무부하란 요구되는 업무를 처리하기 위한 비용을 설명하는 일반적인 용어로, 주어진 기간 동안 특정 자원에 할당된 업무 또는 업무처리 시간의 총량을 의미한다. 업무부하의 측정은 업무부하 균등화뿐 아니라 체계적인 인력관리 등을 위한 중요한 기초자료로 직접적인 활용이 가능하다. 특히, 대다수의 인력을 관리해야 하거나 인건비 비율이 높은 노동집약적 산업 또는 그러한 특징을 가진 기업들에 있어 인적 자원의 효율적인 관리를 위한 필수 정보이다. 이러한 업무 부하의 측정, 산정 또는 계산 등을 위한 방법은 다양하게 존재하며, 이는 실제 수행된 업무, 즉 업무 수행 결과와 관련된 데이터를 기반으로 측정하는 것이 기본이다. 그러나 본 연구에서는 이러한 기록된 데이터를 활용한 측정이 아닌 예측 또는 추정 방법에 대해 시스템적으로 구현하고자 한다. 특히, 우편물류 프로세스 중에서 가장 노동집약적이고 지리공간적인 영역 내에서 업무를 수행하는 특성을 가진 우편 집배업무를 대상으로 편리하게 업무부하를 예측하기 위하여, GIS 환경에서 지리적 공간을 설정하는 것만으로 해당 영역에 대한 업무부하 예측이 가능한 시스템 구현 방법에 대해 소개한다.
RFID 테스트 센터의 성능시험 프로세스 관리를 위한 BPM의 활용방안-BRPTC에 적용
유영웅,배혜림 대한산업공학회 2008 대한산업공학회 춘계학술대회논문집 Vol.2008 No.5
BRPTC(Busan RFID/EPC Performance Test Center)는 ‘EPCglobal Test Center Accreditation Program"에 따라 EPCglobal로부터 PTC (Performance Test Center)로서 인증을 위한 RFID 성능시험센터이다. 이는 국내 RFID 기술 확산과 파일럿 프로젝트 및 협력사들과의 전략적 제휴를 통해 국내 RFID 시장 활성화의 목적을 가지고 있다. 본 연구에서는 RFID 기술을 도입 또는 적용하고자하는 고객(기업)으로부터 의뢰 받은 다양한 RFID 관련 실증 테스트를 수행하는 BRPTC에서 발생되는 RFID 성능테스트 프로세스의 관리를 위하여 RFID 미들웨어에 BPM(Business Process Management) 시스템을 도입한 사례를 설명한다. 이를 위하여 RFID 미들웨어에서부터 발생하는 데이터 및 이벤트의 흐름을 포함하여 최종 시험평가 및 시험성적서의 형태로 테스트 결과가 생성되기까지의 프로세스에 BPM 방법론 적용하여 BRPTC의 RFID 성능 테스트와 관련된 업무 자동화와 최종적으로 RFID 성능 테스트 프로세스라는 새로운 형태의 프로세스에 대한 관리 방법론을 제시하고자 한다.
유영웅,이해원,허홍석,윤대섭 대한산업공학회 2015 대한산업공학회 춘계학술대회논문집 Vol.2015 No.4
업무부하란 요구되는 업무를 처리하기 위한 비용을 설명하는 일반적인 용어로, 주어진 기간 동안 특정 자원에 할당된 업무 또는 업무처리 시간의 총량을 의미한다. 업무부하의 측정은 업무부하 균등화뿐 아니라 체계적인 인력관리 등을 위한 중요한 기초자료로 직접적인 활용이 가능하다. 특히, 대다수의 인력을 관리해야 하거나 인건비 비율이 높은 노동집약적 산업 또는 그러한 특징을 가진 기업들에 있어 인적 자원의 효율적인 관리를 위한 필수 정보이다. 이러한 업무 부하의 측정, 산정 또는 계산 등을 위한 방법은 다양하게 존재하며, 이는 실제 수행된 업무, 즉 업무 수행 결과와 관련된 데이터를 기반으로 측정하는 것이 기본이다. 그러나 본 연구에서는 이러한 기록된 데이터를 활용한 측정이 아닌 예측 또는 추정 방법에 대해 시스템적으로 구현하고자 한다. 특히, 우편물류 프로세스 중에서 가장 노동집약적이고 지리공간적인 영역 내에서 업무를 수행하는 특성을 가진 우편 집배업무를 대상으로 편리하게 업무부하를 예측하기 위하여, GIS 환경에서 지리적 공간을 설정하는 것만으로 해당 영역에 대한 업무부하 예측이 가능한 시스템 구현 방법에 대해 소개한다.
Study of Mast Cells and Granules from Primo Nodes Using Scanning Ionic Conductance Microscopy
유영웅,정고운,권희민,배경희,조상준,소광섭 사단법인약침학회 2015 Journal of Acupuncture & Meridian Studies Vol.8 No.6
Acupuncture points have a notable characteristic in that they have a higher density of mast cells (MCs) compared with nonacupoints in the skin, which is consistent with the augmentation of the immune function by acupuncture treatment. The primo vascular system, which was proposed as the anatomical structure of the acupuncture points and meridians, also has a high density of MCs. We isolated the primo nodes from the surfaces of internal abdominal organs, and the harvested primo nodes were stained with toluidine blue. The MCs were easily recognized by their stained color and their characteristic granules. The MCs were classified into four stages according to the degranulation of histamine granules in the MCs. Using conventional optical microscopes details of the degranulation state of MCs in each stage were not observable. However, we were able to investigate the distribution of the granules on the surfaces of the MCs in each stage, and to demonstrate the height profiles and three-dimensional structures of the MCs without disturbance of the cell membrane by using the scanning ion conductance microscopy.
유영웅,정훈,배혜림 한국전자통신연구원 2015 ETRI Journal Vol.37 No.2
In today’s highly competitive business environment, most companies try to manage their logistics function strategically to satisfy their orders as cost-effectively as possible and maximize their present and future profits. In this environment, logistics process visibility is essential to companies wishing to competently track components, parts, or products in transit from the original suppliers to the final destinations. Thus, it is important to provide instantly and easily recognizable information about such visibility to all stakeholders, especially customers. To ensure a high-level geographical visibility of the logistics processes, in this paper, we propose a way of implementing a GIS-based logistics process monitoring environment and of integrating a performer’s work processing environment on the monitoring system. Additionally, to provide more abundant monitoring information, we describe a procedure for creating and processing various monitoring information, which are represented as ECA rules in this work processing environment. Therefore, it is possible to provide intuitive and visible monitoring information regarding the logistics process and resource elements.
RFID 테스트 센터의 성능시험 프로세스 관리를 위한 BPM의 활용방안-BRPTC에 적용
유영웅,배혜림 한국경영과학회 2008 한국경영과학회 학술대회논문집 Vol.2008 No.5
BRPTC(Busan RFID/EPC Performance Test Center)는 ‘EPCglobal Test Center Accreditation Program"에 따라 EPCglobal로부터 PTC (Performance Test Center)로서 인증을 위한 RFID 성능시험센터이다. 이는 국내 RFID 기술 확산과 파일럿 프로젝트 및 협력사들과의 전략적 제휴를 통해 국내 RFID 시장 활성화의 목적을 가지고 있다. 본 연구에서는 RFID 기술을 도입 또는 적용하고자하는 고객(기업)으로부터 의뢰 받은 다양한 RFID 관련 실증 테스트를 수행하는 BRPTC에서 발생되는 RFID 성능테스트 프로세스의 관리를 위하여 RFID 미들웨어에 BPM(Business Process Management) 시스템을 도입한 사례를 설명한다. 이를 위하여 RFID 미들웨어에서부터 발생하는 데이터 및 이벤트의 흐름을 포함하여 최종 시험평가 및 시험성적서의 형태로 테스트 결과가 생성되기까지의 프로세스에 BPM 방법론 적용하여 BRPTC의 RFID 성능 테스트와 관련된 업무 자동화와 최종적으로 RFID 성능 테스트 프로세스라는 새로운 형태의 프로세스에 대한 관리 방법론을 제시하고자 한다.