http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유영균(Young Gyun Yoo),김재훈(Jae Hoon Kim),이현승(Hyun Seung Lee),박진무(Jin Moo Park),박준규(Joon Kyoo Park),전경락(Kyeong lak Jeon) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
Spacer grid is key-component to support fuel rod in nuclear fuel assembly. Contacting force from spring and dimple and fluid influenced vibration damage to fuel rod and spacer grid. In the study, the stress analysis of spacer grid performed under environment of inside the reactor. And the characteristic of stress distribution evaluated by boundary condition that suitable for this analysis.
유영균(Young Gyun Yoo),하재석(Jae Seok Ha),정동희(Dong Hee Jung),김재훈(Jae Hoon Kim),강신준(Shin Jun Kang) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.5
컨넥팅 로드 볼트를 포함한 몇 가지 중요한 엔진 볼트의 피로 내구성 평가는 엔진 개발의 초기 단계에서 미리 최적의 볼트를 결정하는 것과 관련되어 점점 더 강조되었다. 엔진 컨넥팅 로드 볼트의 피로파괴는 고효율 경량엔진에서 빈번이 발생된다. 그러나, 반복적인 하중이 작용하는 곳에서 인장연결부에 사용되는 고장력볼트에 인장피로 파괴 사례가 발생되고 있으나 아직까지 우리나라에서는 이에 대한 이론 및 실험적인 연구가 없는 실정이다. 따라서 본 연구에서는 사용된 재료는 SCM435H 소재의 컨넥팅 로드 볼트로 인장피로시험을 수행하였다. 컨넥팅 로드 볼트의 파단 형태를 나사부와 프렌지부로 2부분으로 나누어 시험을 수행하였고 피로강도평가는 무한수명을 1×10?cycle로 1%, 10%, 50%, 90%, 99% 신뢰도분석을 하였다. Fatigue durability assessment of some critical engine bolts including connecting-rod bolts has been increasingly emphasized in association with determination of optimal bolt preload at the early stage of engine development because fatigue failure of engine connecting-rod bolt has frequently occurred in developing high power and light weight engines. The theoretical and experimental study for the fatigue failure of tensile bolt has not been well established. In this study, we performed tensile fatigue tests at the thread and flange of SCM435H material of connecting-rod bolts under tension. Evaluation of Fatigue Strength was performed by fatigue limit of 1×10?cycle and reliability assessment analyzed in accordance with survival probability at 1%, 10%, 50% 90% and 99%.
박진무(Jin Moo Park),김재훈(Jae Hoon Kim),유영균(Young Gyun Yoo),박준규(Jun Kyu Park),전경락(Kyung Lak Jeon) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
In order to evaluate the wear resistance of Zirconium alloy and Inconel alloy, abrasive wear test performed by using Pin-on-disk apparatus. To relative analyze of wear resistance for Zirconium alloy and Inconel alloy, pin specimen that composed with SM45C was used. Quantity of wear compared with specific wear rate and friction coefficienct for each materials, and worn surface observed by SEM. Based on the test result, the wear resistance of each materials under various sliding speed and sliding distance were discussed in detail.