http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
X-Ray 를 이용한 삼차원(三次元) 좌표해석(座標解析)에 관한 연구(硏究)
유복모,박준규,김인섭,Yeu, Bock Mo,Park, Joon Kyu,Kim, In Sop 대한토목학회 1987 대한토목학회논문집 Vol.7 No.2
X-Ray photogrammetry is the method that register and analize the anatomical or physiological information about the human body by the photography form. In this paper, using X-Ray, accuracy of three dimensional coordinates of objects which are deformed and a part of human body is analyzed. An objective of this analysis lies in improving the accuracy of three dimensional coordinates and enhancing the practical use. Through the observation, X-Ray Photogrammetry is used in practical use. And X-Ray photograph is used the reform of graphical model by the determination of the three dimensional coordinates about all sides of object. X-Ray 사진측량(寫眞測量)은 인체에 대한 해부학적(解剖學的) 또는 생리학적(生理學的) 자료를 사진형태로 기록하여 해석하는 방법이다. 본 연구는 X-Ray를 이용하여 모델이 되는 피사체(被寫體)에 변형(變形)을 준 각 경우와, 인체 부분을 모델로 할 경우의 3 차원 좌표에 대한 정확도를 분석하므로써, X-Ray 사진(寫眞)에 의한 3 차원 위치결정의 정확도(正確度)를 향상시키고, 실용성을 높이는데 그 목적을 두고 있다. X-Ray를 이용하여 인체부분의 실제 피사체(被寫體)를 관측(觀測)한 결과, 높은 정확도(正確度)로 실제응용을 할 수 있었으며, X-Ray 사진을 이용하여 피사체(被寫體) 모든 면에 대한 삼차원(三次元) 좌표(座標)를 결정 할 수 있었다.
지상사진(地上寫眞)에 의한 삼차원변형측량(三次元變形測量)의 신뢰도(信賴度) 분석(分析)(기일(其一))
유복모,유환희,김인섭,Yeu, Bock Mo,Yoo, Hwan Hee,Kim, In Sub 대한토목학회 1987 대한토목학회논문집 Vol.7 No.4
지상사진측량(地上寫眞測量)에 의한 3차원변형해석(次元變形測量)은 표정점(標定點)에 대한 3차원좌표(次元變座標)를 계산하고 이들 좌표로부터 변위(變位)를 구하므로써 변형해석(變形測量)을 하게 된다. 지상사진측량(地上寫眞測量)에 의한 변형해석(變形測量)은 3차원좌표(次元變座標) 획득과 변위점검출(變位點檢出) 및 변형량추정(變形量推定)으로 크게 나눌 수 있다. 본(本) 연구(硏究)에서는 처음단계로 번들조정법에 의한 좌표계산에서 지상기준점수(地上基準點數)와 사진수(寫眞數)의 증가에 따른 외부표정요소(外部標定要素)의 분산(分散)-공분산행렬(共分散行列)변화를 분석하였다. 그리고 지상기준점(地上基準點)의 정확도(正確度)를 향상시키기 위한 제약조건을 주기위해 번들조정법에 자유강조정(自由鋼調整)개념을 도입하였다. 이상의 결과분석으로부터 경제성과 시간절약의 측면을 고려할때 지상기준점수(地上基準點數)는 6점(點), 사진수(寫眞數)는 3개가 적합함을 알 수 있다. 또한 번들조정에 자유강조정(自由鋼調整)개념을 적용한 경우 공간거리의 제약조건을 외곽에 분포시키는 것이 바람직함을 알 수 있었다. The 3-dimensional deformation measurement by the terrestrial photogrammetry is consist of 3-dimensional coordinates computation, displaced point detection and deformation estimation of object targets. In this study, at the first step of deformation analysis, the variation of the variance-covariance matrix for the exterior orientation elements was analyzed by the increment of the ground control points and the photos in the Bundle adjustment. And then, to give the constraints for improving accuracy of ground control points, the concept of Free-Network adjustment was applied to Bundle adjustment. As a result, we knew that it was desired in the accuracy and the economy, the observation time when the numbers of ground control point and photo were respectively 6 points and 3 photos. In addition, in the case of applying the concept of Free Network adjustment in Bundle adjutment, it was desirable that the space distance for the constraints is distributed outside.
근거리(近距離) 사진측량(寫眞測量)의 촬영방향(撮影方向)과 수렴각변화(收斂角變化)에 따른 3차원(三次元) 좌표결정(座標決定)의 정확도(正確度) 분석(分析)
유복모,손덕재,Yeu, Bock Mo,Sohn, Duk Jae 대한토목학회 1989 대한토목학회논문집 Vol.9 No.4
시설물측량 및 변형측량 등의 지상사진측량에서 근래 널리 이용되는 수렴사진의 경우, 최적촬영조건을 규명하기 위하여 수렴각에 따른 정확도 변화에 대한 실험적 연구와 정확도 예측모델에 대한 많은 연구가 수행되어 왔다. 이러한 연구는 기본적으로 대상물 정면 중앙 방향에 대하여 좌우 대칭인 위치에서 수렴촬영하는 경우에 대한 것이 대부분이다. 그러나, 지상사진에 의한 건물, 교량, 댐, 평탄한 지면 등과 같은 시설물 측량의 경우 대상물 형태가 평면적이고, 또한 대상물 주위의 제약조건에 의하여 정면에서 촬영하기 곤란하거나, 충분한 수렴각을 확보하기가 곤란한 경우가 있다. 따라서, 본 연구에서는 평면형 대상물에 대하여 촬영거리를 일정하게 유지하면서 촬영방향과 수렴각을 변화시킴에 따른 3차원 좌표결정의 정확도를 분석하여 정면, 측면 및 최측면에서의 최적촬영조건을 도출하고자하였다. 본 연구의 결과, 평면대상물인 경우 정면에서 촬영방향각 $30^{\circ}$ 부근까지는 수렴각을 증가시킬수록 높은 정확도를 얻을 수 있으며 한쪽 사진이 최측면 사진인 경우 수렴각을 $60^{\circ}$까지 증가시킴에 따라 정확도를 크게 향상시킬 수 있음을 알았다. For convergent photos, which are now widely adopted for terrestrial facility survey, a number of experimental studies and theoretical studies on the developments of accuracy predictional model according to the convergent angle change have been accomplished. And such studies are basically depend on the symmetrical geometric configuration at the normal direction to the center of the object. However, in may cases of facility survey such as building facades, bridges, dam surfaces, relatively flat topography, etc., the object features are almost like planar, and frequently the surroundings do not allow the photo station at normal direction, and the sufficient convergent angle can be hardly achieved. Considering those points, in this study, the accuracy analysis on three dimensional coordinates according to the variations of photo direction and of convergent angle to the planar object were attempted, and the optimum geometric configurations at the normal, side-looking, and the most side-looking direction were investigated. The result through this study show that from normal direction to the side-looking direction angle ${\tau}=30^{\circ}$, the larger the convergent angle, the higher the accuracy, and in case that right photo is at the most side-looking direction, the better accuracy can be achieved according to the convergent angle increase up to $60^{\circ}$.