http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
우종석,리오넬,정상중,정완영 한국융합신호처리학회 2023 융합신호처리학회 논문지 (JISPS) Vol.24 No.4
Falling occurs unexpectedly during daily activities, causing many difficulties in life. The purpose of this study was to establish a system for fall detection of high-risk occupations and to verify their effectiveness by collecting data and applying it to predictive models. To this end, a wearable device was configured to detect fall by calculating acceleration signals and azimuths through acceleration sensors and gyro sensors. In addition, the study participants wore the device on their abdomen and measured necessary data from falls-related movements in the process of performing predetermined activities and transmitted it to the computer through a Bluetooth device present in the device. The collected data was processed through filtering, applied to fall detection prediction models based on deep learning algorithms which are 1D CNN, LSTM and CNN-LSTM, and evaluate the results.
ITO 버퍼를 이용한 태양전지 투명전극을 위한 Al 도핑된 ZnO 박막의 특성향상에 대한 연구
우종석(Jong-Seok Woo),강동원(Dong-Won Kang),국승희(Seung-Hee Kuk),한민구(Min-Koo Han) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
Al 도핑된 ZnO(AZO) 박막은 유리기판의 ITO 버퍼 위에 직류 마그네트론 스퍼터링 방식으로 연속 증착하였다. ITO의 두께가 AZO 박막의 결정성에 미치는 영향을 알아보기 위해 ITO의 두께를 30㎚에서 120㎚까지 변화를 주었다. X-ray 회절 측정결과, ITO 버퍼 위에서 성장한 AZO 박막은 ITO 두께가 증가함에 따라 [002] 방향으로 결정성장이 잘 일어나는 것을 확인하였다. ITO 두께의 증가에 따라 AZO 박막의 결정구조가 향상되는 점은 ITO 버퍼에서 AZO가 에피와 유사한 방식으로 성장한 것이 이유로 분석된다. ITO 두께가 증가함에 따라, 홀 측정을 통해 살펴본 AZO 박막의 이동도는 5.44 ㎠/Vs(no ITO)에서 23.6㎠/Vs(ITO120㎚)으로 현저히 증가하였고, 비저항은 1.99×10?³Ω · ㎝에서 3.63×10?⁴Ω · ㎝로 약 81.7% 개선되었다. ITO 버퍼 위에서 성장한 AZO 박막은 가시광 영역에서 90.0%, NIR 영역에서 89.6%로 ITO 없이 성장한 AZO 박막이 82.1%와 88.1%를 보여주고 있는 것에 비해 투과율이 우수하였다. 90㎚와 120㎚의 두께를 가진 ITO 버퍼에서 성장한 AZO 박막은 ITO없이 성장한 AZO 박막 대비 haze 값이 비슷하거나 더 높았다. ITO 버퍼 위에서 성장시킨 표면 텍스쳐링된 AZO 투명전극은 박막태양전지와 같은 소자의 특성 향상에 도움이 될 수 있다.
이축 압출기를 이용하여 제조된 PMMA/MWNT 복합체의 특성 분석
우종석 ( Jong Seok Woo ),방대석 ( Dae Suk Bang ),이건웅 ( Geon Woong Lee ),계형산 ( Hyoung San Kye ),신경철 ( Kyung Chul Shin ) 한국고무학회 2007 엘라스토머 및 콤포지트 Vol.42 No.3
최근 들어 전기적, 기계적 성질이 우수한 다중벽탄소나노튜브(Multi-Walled Carbon Nanotubes)/고분자 복합재료에 대한 연구가 활발히 진행 중이다. 본 연구에서는 모듈라 치합형 동방형 회전 이축 압출기(Modular Intermeshing Co-Rotating Twin Screw Extruder, L/D=42)를 이용하여 PMMA/MWNT 복합체를 제조하였다. 이렇게 제조된 PMMA/MWNT 복합체의 표면저항을 측정한 결과 MWNT의 함량이 4 wt% 일 때 104 Ω/sq를 나타내어 전자파차폐(Electronic Magnetic Interference) 물질로 응용할 수 있는 가능성을 확인 하였다. 그리고 열중량 분석기 (Thermogravimetric Analysis), 시차주사열량계(Differential Scanning Calorimeter)를 이용한 열적 특성, 주사전자현미경(Scanning Electron Microscopy)을 통하여 형태학적 변화를 분석하였다. 또한 유변학적 특성을 알아보기 위해 용융흐름지수(Melt Flow Index)를 측정하였다. MWNTs have been widely investigated due to unique properties of such as good electrical conductivity and thermal stability in polymer composites industries. This paper established the procedure to fabricate PMMA/MWNT composites by a modular intermeshing co-rotating twin screw extruder with L/D ratio of 42. The electrical properties of PMMA/MWNT composites with different content of MWNT have been investigated. A sheet resistance percolation was observed at 4 wt% of MWNT for the melt processed composites. Sheet resistance of PMMA/MWNT composite film containing 4 wt% of MWNT was nearby 104 Ω/sq and this shows the possibility of potential application to EMI (Electronic Magnetic Interference) shielding materials. The characteristics of composites were analyzed by TGA, DSC, and SEM. In addition, MFI (Melt Flow Index) has been measured to analyze the rheological property.