http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전자기 과도현상 해석을 위한 S 영역 등가시스템 PART Ⅱ: 주파수 의존 교류 시스템 등가
왕용필,정형환 대한전기학회 2005 전기학회논문지A Vol.54 No.4
- Electromagnetic transient simulation can be used to model complex non-linearities that very difficult to represent adequately in the frequency domain. This problem is greatly reduced with the use of frequency dependent network equivalents for the linear part of the system. S-domain rational function fitting techniques for representing frequency dependent equivalents have been developed using Least Squares Fitting(LSF). However it does not suffer the implementation error that exited in this work as it ignored the instantaneous term. This paper presents the formulation for developing 2 port Frequency Dependent AC System Equivalent(FDACSE) with the instantaneous term in S-domain and illustrates its use. This 2 port FDNE have been applied to the New Zealand AC system. The electromagnetic transient package PSCAD/EMTDC is used to assess the transient response of the 2 port (FDACSE) developed with Norton Equivalent network. The study results have indicated the robustness and accuracy of 2 port FDACSE for electromagnetic transient studies.
왕용필,정종원,정동일,Wang, Yong-Peel,Jeong, Jong-Won,Jeong, Dong-Il 한국조명전기설비학회 2007 조명·전기설비학회논문지 Vol.21 No.3
최근 전력 전자 응용 기기의 사용증가로 비선형 특성 부하에 의한 고조파가 상당히 발생하고 있으며, 이에 의한 영향으로 배전시스템의 변압기 열화, 소자의 고장, 통신 간섭 등의 여러 가지 문제를 발생시키고 있다. 따라서 배전 시스템에서의 고조파 수준과 전달특성을 정확하게 분석하기 위하여 배전시스템의 효과적인 실측정과 모델링에 관한 연구가 필요한 실정이다. 본 논문에서는 고조파 관리기준 IEC61000-3-6 토대로 배전 시스템의 고조파 특성을 해석하기 위하여 공통 결합점(Point of Common Coupling : PCC)을 선택하였다. 실 배전 시스템의 PCC 지점에서 고조파 전압, 전류를 측정하여, 고조파 분포, 비선형 부하 성분 및 고조파 전압, 전류 왜형률 (Voltage/Current Total Harmonic Distortion: VTHD/ITHD)을 분석하였다. 또한 정상상태에서 고조파 임피던스, 전압, 전류을 해석을 통하여 실 배전시스템을 효과적이고 정확하게 모델링 되었을 확인하였다. 또한 고조파 전류원 발생시에 고조파 전압, 전류를 비교 분석하여 고조파 전달특성을 조사하였다. The increasing use of power electronic equipment in distribution system has been the reason for the greater concern about a harmonic in recent time. Therefore, it is necessary for measurement and modelling to analyze a harmonic level and a transfer characteristic in distribution system. In this paper, the Point of Common Coupling (PCC) is selected to analyze harmonic characteristic of distribution system by IEC 61000-3-6. Harmonic voltage and orient were measured at the PCC of real distribution system Harmonic distribution, nonlinear load component and Total Harmonic Distortion(THD) were verified. The effective and accurate modelling of real distribution system were proved through a analysis of harmonic impedance, voltage and current under steady-state. Harmonic transfer characteristic were investigated through a analysis of harmonic voltage and current under harmonic current source.
H∞최적 제어기법을 이용한 전력계통의 안정화에 관한 연구
정형환,이정필,허동렬,왕용필 東亞大學校 海洋資源硏究所 1998 硏究論文集 Vol.11 No.1
In this paper, we are considered various possible disturbance conditions in order to design controller, H ∞ optimal controller is successfully designed to control in such as situations. To do this, we are determined weighting function and design parameter γ to method of trial and error by Glover-Doyle algorithm. To compare with H∞-PSS and conventional-PSS which is applied in nominal system and load variations, the dynamic characteristics of H∞-PSS controller was verified which has a good response.
고속 분할법에 의한 교류-직류 전력계통의 조류계산에 관한연구
안병철,정형환,이권순,이준탁,정동일,왕용필 東亞大學校 海洋資源硏究所 1992 硏究論文集 Vol.5 No.1
The active and reactive power transfers to and from nodes connected to h.v.d.c. links do not obey the general rules of a.c. power transmission, the active power is independent of phase angle relationships and the reactive power is not directly related to voltage variation. Under such circumstances it is difficult to visualize h.v.d.c. model compatible with the behaviour of the fast decoupled algorithm. However, acknowledging the general acceptance of fast decoupled programes and the existence of some h.v.d.c. links(particularly considering their large power-carrying capacitors) a model of the h.v.d.c. transmission link suitable for incorporation with fast decoupled loadflow programes is described in the following sections.
상태 가중치 개선에 의한 교류-직류 연계계통의 동태안정도에 관한 연구
정형환,안병철,왕용필 東亞大學校 1995 東亞論叢 Vol.32 No.-
In this paper, a dynamic state equation is constructed in order to get an optimal control signal for stabilization of a power system. Co-state matries to each of its coefficient matrices are also found. According to these matrices, eigenvalue, eigenvalue sensitivity and state weighting are calculated and the riccati equation is constructed. The control signal is determined by the roots of the equation and during this process, state weighting are adjusted to the shift of dominant eigenvalue until optimal one can be found. The resultant optimal controller, which is obtained by the process mentioned above, is applied to A.C. only and A.C - D.C. power systems. The dynamic stability of voltage and frequency of the power system with disturbances is considered.
벡터 적합을 이용한 전자기 과도현상 및 고조파 시뮬레이션
왕용필(Yong-Peel Wang),안준호(Joon-Ho Ahn),박민영(Min-Young Park),김경훈(Kyoung-Hoon Kim),허동렬(Dong-Ryol Hur) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
전력시스템 전자기 과도현상은 시간 영역에서 정확하고 효과적으로 해속되어져야 한다. 그러나 대규모 전력시스템을 상세하게 표현하기 위해서는 엄청난 계산량이 필요하다. 따라서 전력시스템 과도현상을 해석하기 위하여 전력시스템의 작은 부분은 상세하게 표현하고, 나머지 부분은 효과적으로 등가 시스템이 필요하다. 본 논문에서는 모든 주파수 영역에서 등가 시스템을 개발하기 위하여 벡터 적합을 이용하여 Z 영역 유리함수 계수를 추정하여 주파수 의존 등가 시스템을 개발하였다. 개발한 FDNE의 우수성을 입증하기 위하여 테스트 시스템에 적용하여 시스템이 고장시 전자기 과도현상 및 고조파 평가를 비교 · 검토하였다.