http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오흥국 전인창조과학회 2016 전인창조과학회 국제학술대회 Vol.2016 No.10
기존의 원자 모델은 탄생 과정에서 보아의 모델과 불확정성원리의 도움을 받게 되는데 이 과 정에서 확률함수의 전체에너지가 영보다 작은 것만 고려하고 영보다 큰 것을 빠뜨리게 된다. 저자는 국민신문고를 통하여 교육부와 경기도 교육청에 민원신청과 답변을 통하여 대화하게 되고 특히 경기도 교육청의 노력으로 기존 모델의 문제점을 확인하고 수정 노력의 답변을 받 는다. 전체에너지가 영보다 큰 경우를 고려한 새로운 원자 모델을 제시하고 기(氣)(회전전자파)의 발 생을 통하여 원자가 결합하고 풀리는 것을 확인하고, 전체에너지(E)가 영보다 작을 경우 전자 파를 방출 흡수하는 기존의 원자 모델과 일치하는 것을 확인한다. 즉, 확률함수에서 시간의 함수가 기(氣)(회전전자파)를 발생(흡수)하는 해당 함수이고 위치의 함수가 전자파를 발생(흡수)하는 함수이다.
오흥국,연규현,김태훈 韓國工作機械學會 2000 한국생산제조학회지 Vol.9 No.4
The reorientations of the atoms by frictional shear deformation at the surface induce cracks at the boundary of the grain. The cracks grow and propagate in regions where the hydrostatic component of stress is least com-pressive because the compressive component restores the cracks by three-dimensional crystallizing π-bondings. The materials, with Luder's band have very small amount of wear at the initial state. It suggests that initial frictional shear deformation be consumed to the formation of the Luder's band. The average wear amounts of the materials increase very steeply as the ø_u, the stress-strain ratio at the ultimate point, decreases.
오흥국,이정근 대한기계학회 1984 대한기계학회논문집 Vol.8 No.1
Forward extrusion of sintered porous metal through conical converging die is analyzed using slab method on the basis of plasticity theory for porous metal. It is taken into consideration in the analysis that the material in the container is continuously recompressed on densified until the process reaches steady state. Extrusion pressure and distribution of relative density from the die inlet to the outlet are calculated under various process variables. The results are useful in finding initial relative density of the billet, reduction of area and cone angle of the die in order to get required final products. Experiments are done for porous copper and then compared with the computed results.
오흥국 대한기계학회 1982 大韓機械學會誌 Vol.22 No.3
소결 금속(sintered metal)은 기공(pore)의 존재로 성형에 있어서 체적변화를 유발하므로 이제까지 사용되어오던 체적변화를 유발하므로 이제까지 사용되어오던 일반 소성이론(conventional plasticity theory)은 적용할 수 없기 때문에 소결금속에 대한 소성이론을 정립해 오고 있다. 그 발달 과정을 보면 미국과 일본에서 각각 독자적인 방법으로 진행되었는데 미국에서는 Kuhn씨가 포아숀 비(.nu.)를 정의하여 실험적으로 구하고 이것을 기초로 하여 항복조건을 정립하고 응력과 변형도율과의 관계를 유도해 냄과 동시에 알루미늄 분말 소결원판 단조에 적용하여 그 실용성을 예시하였다. 한편 일본에서는 교오토오 대학의 Shima, Oyane등이 연구 정립한 것으로서 다공정 금속과 그 본금속의 항복 응력비와 정수압의 항복 응력에 대한 영향도를 정의하여 실험을 통하여 결정한 다음 항복조건을 만들고 이로부터 응력과 변형율과의 관계, 등가 변형율을 유도하였고 이를 폐금형 압축시험에 적용하였다.