http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오승원 한국목재공학회 1996 목재공학 Vol.24 No.2
4군데의 임반에서 선발된 라디에타 소나무를 공시목으로 두께 2.6㎜와 1.4㎜의 단판을 제작하였다. 단판을 조합하여 만들어진 합판의 크기는 1200㎜×2400㎜×12.5㎜이었다. 단판의 등급과 합판의 강도적 성질은 원목의 성질과 깊은 관계가 있으며, 원목의 밀도는 합판의 성질을 결정하는 중요한 인자가 되었다.
공간 및 기상정보 시계열 모형을 이용한 양파 생산량 예측
오승원,김민수 한국자료분석학회 2017 Journal of the Korean Data Analysis Society Vol.19 No.5
Onion is a typical seasoning vegetable and has high self-sufficiency, so it is very closely related to the diet of Koreans. Therefore, if accurate prediction of domestic onion production is possible, it will be possible to solve the price instability and imbalance of supply and demand. In this paper, Three following model were used to predict onion production using the data of onion production per unit area, STARMA model which is considering the spatial information of the producing area, VAR model which is considering the regional correlation, VAR-X model which is considering exogenous variables using the correlation of production volume by region and weather information. The MAPE of the VAR-X model is the lowest among the MAPE estimates of the onion production per unit area in 2015 using the individual models fitted the data from 2006 to 2014. On the basis of the characteristics of the onion cultivated in the open field, the VAR-X model considering weather information has higher power to predict than the STARMA model considering spatial information of the producing area. However, considering the reduction of the difference in MAPE values between the STARMA model and the VAR-X model in the Jeonnam region, it is necessary to consider spatial information according to the region for predicting onion production in Jeonnam area in the future. 양파는 대표적인 양념채소류이며 자급률 또한 높기 때문에 한국인의 식생활과 매우 밀접한 관련이 있다. 따라서 가격불안과 수급의 불균형을 방지하기 위하여 국내 양파 생산량에 대한 정확한 예측이 필요하다. 본 논문에서는 단위면적당 양파 생산량 자료를 사용하여 시계열 모형 중 각 주산지의 공간정보를 이용한 공간자기상관이동평균모형(STARMA model), 각 지역별 상관성을 고려한 벡터자기상관모형(VAR model), 지역별 생산량의 상관성과 기상정보를 활용한 외생변수 벡터자기회귀모형(VAR-X model)을 이용하여 생산량을 예측하고자 한다. 2006년부터 2014년까지 데이터를 사용하여 2015년도 단위면적당 양파 생산량을 예측하였다. MAPE를 비교해본 결과 VAR-X, VAR, STARMA 순으로 예측력이 높았다. 노지에서 재배되는 양파의 특성상 주산지의 공간정보를 고려한 STARMA 모형보다 기상정보를 고려한 VAR-X 모형의 예측력이 더 높다는 사실을 확인할 수 있다. 하지만 전남, 제주를 포함한 남부지역에서는 STARMA 모형의 적합도가 VAR-X 모형보다 더 우수하다는 분석결과를 얻었으므로 추후 전남지역의 양파 생산량에 대한 효율적인 예측을 위해서는 지역에 따른 공간정보를 고려할 필요가 있다.
오승원,박희준,황정우 경상대학교 농업생명과학연구원 2012 농업생명과학연구 Vol.46 No.2
This study was investigated on the properties of board made from Miscanthus sinensis var. purpurascens particles differed in density of board and mixed ratio of powder type- and liquid type- phenolic resin. As the board density increase, thickness swelling and bending strength increased while water absorption decreased. With increasing the resin content, water absorption and thickness swelling decreased while MOR and internal bond strength increased. The board made of liquid type phenol-formaldehyde resin was low in water absorption and thickness swelling, and there were similar bending strengths between power type- and liquid type- phenol resin in resin cont of 11% and 13% at the board density 0.4 g/㎤ and internal bond strength was higher with liquid type-phenolic resin in its bending strength. 거대억새 자원의 활용도 제고방안의 일환으로 거대억새 파티클을 이용하여 보드를 제조하고 수지첨가량, 수지타입 및 밀도에 따른 물성을 검토하였다. 흡수율은 보드의 밀도 및 수지첨가량이 증가할수록 감소하였으며, 휨강도와 박리강도는 밀도 및 수지 첨가량이 증가할수록 파티클간 결합력이 강해져 증가하였다. 두께 팽창률은 보드의 밀도가 증가함에 따라 증가하였고 수지 첨가량이 많을수록 감소하였다. 수지타입에 따라 두께 팽창률과 흡수율은 액상 페놀수지로 제조한 보드가 더 나은 치수안정성을 보였고, 보드밀도 0.4 g/㎤ 로 제조한 경우 수지 첨가율 11~13% 일 때 휨강도는 분말상 및 액상 페놀수지 간에 차이가 없었으며, 박리강도는 액상의 페놀수지로 제조한 보드가 더 좋은 값을 나타내었다.
Relationship between Anatomical Properties and Modulus of Rupture (MOR) of Larix kaempferi Carr
오승원 경상대학교 농업생명과학연구원 2011 농업생명과학연구 Vol.45 No.1
Larix kaempferi is a tree with a major economic impact and is processed in large quantity every year in Korea. This study was carried out to collect basic data for the reasonable use of Larix kaempferi and to investigate the relation between anatomical properties and modulus of rupture (MOR) for heartwood and sapwood. As the length of earlywood tracheid and the radial wall thickness of earlywood tracheid and latewood tracheid increased, the modulus of rupture (MOR) increased, but decreased with increasing microfibril angle. Statistical analysis by the stepwise regression technique shows that the main factors affecting the modulus of rupture (MOR) of heartwood are the microfibril angle and the radial wall thickness of latewood tracheid, while those affecting MOR of sapwood are the length of earlywood tracheid and the microfibril angle.
우드세라믹 제조용 석탄산수지 함침보드의 수지 함침율과 치수 증가율 : 증기분사 시간의 영향 Effect of Steam Injection Time
오승원 한국목재공학회 2002 목재공학 Vol.30 No.2
우드세라믹의 성질에 영향을 미치는 보드의 수지 함침율과 밀도경사의 특성을 알아보기 위하여 증기 처리를 하지 않은 보드와 증기 처리를 1, 5, 10분 실시한 보드를 석탄산수지로 함침한 후 증기분사 시간의 영향을 조사하였다. 증기처리를 하지 않은 보드의 중층과 표층의 밀도 비가 가장 컸으며, 수지 함침율, 길이 및 두께 증가율은 밀도가 증가함에 따라 감소하였다. 또한 증기처리를 10분 실시한 보드의 수지 함침율, 길이 및 두께 증가율이 가장 컸다. The properties of new porous carbon materials "Woodceramics" are affected by the characteristics of raw boards. To investigate of density profile and resin contents in impregnated boards, control board and 3 types of steam-injected boards were made by steam injection time. The wood species used for manufacturing boards was Sugi(Cryptomeria japonica). The results are as follows: 1) The denesity gradient of board after 10 minutes steam injection was the smallest and non-steamed board was largest. 2) The resin content and dimensional rise decreased with increase of board density, and were the largest in board after 10 minutes steam injection but there was little difference between boards after 5 and 10 minutes steam injection.